Effect of series and shunt resistance on the photovoltaic properties of solution-processed zinc oxide nanowire based CZTS solar cell in superstrate configuration
Source abstract
Abstract
Abstract Here we report the chemical synthesis of a hetero-junction solar cell in superstrate configuration using nanocrystalline p-type Cu2ZnSnS4 (CZTS) as absorber layer, vertically aligned n-type ZnO nanowire array as window layer and very thin ZnS as buffer layer. CZTS thin films comprised of nano-sized grains with pure kesterite phase have been synthesized by simple and cost-effective sol-gel spin coating technique without any post-deposition sulfurization process. ZnS coated vertically aligned ZnO nanowire arrays have been grown by seed-assisted chemical bath deposition technique followed by post deposition chemical sulfurization of nanowire surface. The fabricated solar cell in superstrate configuration, FTO/ZnONW/ZnS/CZTS/Au, has exhibited power conversion efficiency ∼1.07% with open circuit voltage ∼0.454 V and short circuit current ∼5.652 mAcm−2 when measured in one sun illumination of AM1.5 solar spectrum. The effects of ZnS coating on the photovoltaic properties in association with the series and shunt resistances of the hetero-junction have been studied here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Progress in chalcopyrite compound semiconductor research for photovoltaic applications and transfer of results into actual solar cell production10.1016/j.solmat.2010.12.033 ↗
2. Deep defects in Cu2ZnSnS4 monograin solar cells10.1016/j.tsf.2008.11.002 ↗
3. Materials availability for large‐scale thin‐film photovoltaics10.1002/(SICI)1099-159X(200001/02)8:1<61::AID-PIP301>3.0.CO;2-6 ↗
4. First-principles study of the band structure and optical absorption of CuGaS210.1103/PhysRevB.84.085145 ↗
5. New world record efficiency for Cu(In,Ga)Se2 thin‐film solar cells beyond 20%10.1002/pip.1078 ↗
6. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
7. New world record Cu(In, Ga)(Se, S)2
8. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
9. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
10. Solar cell efficiency tables (version 51)10.1002/pip.2909 ↗
11. Kesterite thin-film solar cells: advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗
12. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
13. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
14. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
15. Trategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells10.1039/C5EE02153G ↗
16. Cation substitution in earth‐abundant kesterite photovoltaic materials
17. Single-step preparation and characterization of Cu2ZnSn(SxSe1−x)4 thin films deposited by pulsed laser deposition method10.1016/j.jallcom.2012.03.065 ↗
18. Thin film solar cell with 8.4% power conversion efficiency using an earth‐abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
19. Mechanistic aspects of preheating effects of electrodeposited metallic precursors on structural and photovoltaic properties of Cu2ZnSnS4 thin films10.1016/j.solmat.2013.09.006 ↗
20. Optical and electrical properties study of sol-gel derived Cu2ZnSnS4 thin films for solar cells10.1063/1.4895520 ↗
21. Synthesis and characterization of Cu2ZnSnS4 thin films by the sulfurization of co-electrodeposited Cu–Zn–Sn–S precursor layers for solar cell applications10.1039/C4RA02327G ↗
22. Pure sulfide Cu2ZnSnS4 thin film solar cells fabricated by preheating an electrodeposited metallic stack10.1002/aenm.201301381 ↗
23. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel route10.1039/C3TA13533K ↗
24. 7.1% efficient co-electroplated Cu2ZnSnS4 thin film solar cells with sputtered CdS buffer layers10.1039/C5GC02057C ↗
25. Co-electrodeposited Cu2ZnSnS4 thin-film solar cells with over 7% efficiency fabricated via fine-tuning of the Zn content in absorber layers10.1039/C5TA09636G ↗
26. Spray pyrolysis approach to CZTSSe thin films. Influence of solvents on film characteristics10.1088/1361-6641/aad5d0 ↗
27. Sol-gel processed CZTS thin film solar cell on flexible molybdenum foil10.1016/j.tsf.2017.02.019 ↗
28. Fabrication of ZnO/CdS core/shell nanowire arrays for efficient solar energy conversion10.1039/b904993b ↗
29. TiO2 nanorod arrays grown from a mixed acid medium for efficient dye-sensitized solar cells10.1039/c1ee01166a ↗
30. Bulk heterojunction formation between indium tin oxide nanorods and CuInS2 nanoparticles for inorganic thin film solar cell applications10.1021/am201524z ↗
31. Electrical characteristics and rectification performance of wet chemically synthesized vertically aligned n-ZnO nanowire/p-Si heterojunction10.1088/0022-3727/49/11/115102 ↗
32. Phosphorous doping in vertically aligned ZnOnanorods grown by wet-chemical method10.1016/j.nanoso.2016.03.007 ↗
33. Solution-processed Cu2ZnSnS4 superstrate solar cell using vertically aligned ZnOnanorods
34. Importance of CdS buffer layer thickness on Cu2ZnSnS4-based solar cell efficiency10.1088/1361-6463/aac8d3 ↗
35. Surface morphology improvement of three-dimensional solar cell with Cu2ZnSnS4 absorber10.1016/j.jallcom.2013.03.060 ↗
36. Cu2ZnSnS4 solar cell prepared entirely by non-vacuum processes10.1016/j.tsf.2012.05.074 ↗
37. Fabrication of three-dimensional structure solar cell with Cu2ZnSnS410.1143/JJAP.51.10NC33 ↗
38. Doctor-bladed Cu2ZnSnS4 light absorption layer for low-cost solar cell application
39. Surface morphology improvement of three-dimensional solar cell with Cu2ZnSnS4 absorber10.1016/j.jallcom.2013.03.060 ↗
40. Solution-processed Cd free kesterite Cu2ZnSnS4 thin film solar cells with vertically aligned ZnO nanorod arrays10.1016/j.jallcom.2016.09.325 ↗
41. Distribution of relaxation time in solution-processed polycrystalline CZTS thin films: study of impedance spectroscopy10.1016/j.ceramint.2018.05.007 ↗
42. The scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
43. A simple method for the determination of the optical constants n, k and the thickness of a weakly absorbing thin film
44. Theoretical investigations on enhancement of photovoltaic efficiency of nanostructured CZTS/ZnS/ZnO based solar cell device10.1007/s10854-018-8715-y ↗
45. Thermal sulfurization effect on sprayed CZTS thin films properties and CZTS/CdS solar cells performances10.1088/2053-1591/aaa6e5 ↗
46. BN/ZnO heterojunction diodes with apparently giant ideality factors10.1063/1.3212987 ↗
47. Thermal sulfurization effect on sprayed CZTS thin filmsproperties and CZTS/CdS solar cells performances10.1063/1.360007 ↗