journal article·2017-02

Effect of post deposition heat treatment on microstructure parameters, optical constants and composition of thermally evaporated CdTe thin films

P.K.K. Kumarasinghe, Amila Dissanayake, B.M.K. Pemasiri, B.S. Dassanayake

Publisher page

Abstract

Abstract Thin film microstructure and its properties can be effectively altered with post deposition heat treatments. In this respect, CdTe thin films were deposited on glass substrates at a substrate temperature of 200 °C using thermal evaporation technique, followed by air annealing at different temperatures from 200 to 500 °C. Structural analysis reveals that CdTe thin films have a cubic zincblend structure with two oxide phases related to CdTe 2 O 5 and CdTeO 3 at annealing temperature of 400 and 500 °C respectively. Regardless of the annealing temperature, the plane (111) was found to be the preferred orientation for all films. The crystallite size was observed to increase with annealing temperature. All films were found to display higher lattice parameters than the standard, and hence found to carry a compressive stress. Optical measurements suggest high uniformity of films both before and after post deposition heat treatment. Films annealed at 400 °C displayed superior optical properties due to its high refractive index, optical conductivity, relative density and low disorder. Furthermore, according to the compositional measurements, CdTe thin films were found to exhibit Te rich and Cd rich nature at regions near the substrate and center of the film respectively, for all annealing temperatures. However, composition of the regions near the substrate was found to become more Te rich with increasing annealing temperature. The study suggests that changing the annealing temperature as a post deposition treatment affects structural and optical properties of CdTe thin film as well as its composition. According to the observations, films annealed at 400 °C can be concluded to be the best films for photovoltaic applications due to its superior optical and structural properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. High quality 1 μm thick CdTe absorber layers grown by magnetron sputtering for solar cell application10.1016/j.cap.2013.02.015 ↗
2. Crystallization from amorphous structure to hexagonal quantum dots induced by an electron beam on CdTe thin films10.1016/j.jcrysgro.2008.12.056 ↗
3. Influence of post-deposition heat treatment on optical propertiesderived from UV–vis of cadmium telluride (CdTe) thin films depositedon amorphous substrate10.1016/j.apsusc.2015.03.095 ↗
4. Structural, morphological, optical and electrical properties of CdTe films deposited by CSS under an argon–oxygen mixture and vacuum10.1016/j.solmat.2010.07.023 ↗
5. Properties of CdTe films deposited by electron beam evaporation10.1016/0257-8972(90)90169-D ↗
6. Fabrication of CdTe/NiTe films on Ni foils by radio-frequency magnetron sputtering method10.1016/j.jallcom.2014.12.203 ↗
7. Direct growth of CdTe(1 0 0) epilayers on Si(1 0 0) substrate by hot wall epitaxy10.1016/j.apsusc.2004.08.024 ↗
8. Growth of cubic and hexagonal CdTe thin films by pulsed laser deposition10.1016/j.tsf.2004.06.157 ↗
9. Pulsed laser deposition of CdTe thin films for heterojunctions on silicon10.1088/0268-1242/6/5/012 ↗
10. Improving surface smoothness and photoluminescence of CdTe(111)A on Si(111) substrates grown by molecular beam epitaxy using Mn atoms10.1016/j.jallcom.2013.12.253 ↗
11. Epitaxial growth of CdTe thin film on cube-textured Ni by metal-organic chemical vapor deposition10.1016/j.tsf.2011.09.019 ↗
12. Electrodeposition of wurtzite CdTe and the potential dependence of the phase structure10.1016/j.matlet.2015.12.060 ↗
13. Optical, morphological and electrical studies of thermally vacuum evaporated CdTe thin films for photovoltaic applications10.1016/j.solener.2014.06.031 ↗
14. Effect of CdCl2 treatment on thermally evaporated CdTe thin films
15. Optimization of physical properties of vacuum evaporated CdTe thin films with the application of thermal treatment for solar cells10.1016/j.mssp.2015.07.063 ↗
16. Recrystallization in CdTe/CdS10.1016/S0040-6090(99)00753-1 ↗
17. The in¯uence of post-deposition treatment on the physical properties of CdTe flms deposited by stacked elemental layer processing10.1016/S0040-6090(99)00227-8 ↗
18. XRD study of the grain growth in CdTe films annealedat different temperatures10.1016/j.solmat.2003.11.012 ↗
19. Tunable optoelectronic properties of CBD-CdS thin films via bath temperature alterations10.1088/0022-3727/49/9/095109 ↗
20. Influence of bath temperature on CBD-CdS thin films10.1016/j.proeng.2015.09.215 ↗
21. Grain, crystal texture properties of absorber layers in MOCVD-grown CdTe/CdS solar cells10.1088/0268-1242/21/6/009 ↗
22. Synthesis and characterization of sputtered Cd1−xMgxTe alloy and their application in solar cells
23. Influence of the film thickness on structural and optical properties of CdTe thin films electrodeposited on stainless steel substrates10.1016/j.matchemphys.2013.07.043 ↗
24. Structural characterization of CdTe thin films developed on metallic substrates by close spaced sublimation10.1023/B:JMSC.0000013932.66354.a2 ↗
25. The effect of annealing on the structure of CdTe films electro-deposited on metallic substrates10.1016/j.jcrysgro.2003.07.001 ↗
26. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles10.1186/2251-7235-6-6 ↗
27. Effects of Dislocations on the Carrier Transport and Optical Properties of GaN Films grown with an in-situ SiNx Insertion Layer10.1007/s13391-012-1082-6 ↗
28. Effect of CdCl2 treatment on structural and electronic property of CdTe thin films deposited by magnetron sputtering10.1016/j.tsf.2013.04.067 ↗
29. Properties of low temperature vacuum annealed CZTS thin films deposited on polymer substrate
30. Effect of thermal annealing on physical properties of vacuum evaporatedIn2S3 buffer layer for eco-friendly photovoltaic applications10.1016/j.mssp.2015.06.049 ↗
31. Birkholz · 2006
32. X-ray measurements of the depth dependence of stress in gold films10.1016/S0921-4526(99)01904-3 ↗
33. Gissler · 1992
34. Stress determination in textured thin films using X-ray diffraction10.1557/S0883769400041658 ↗
35. Modulated piezoreflectance in semiconductors10.1103/PhysRevB.1.672 ↗
36. Review of optical applications of CdTe10.1051/rphysap:01977001202039100 ↗
37. Optical properties of swift ion beam irradiated CdTe thin films10.1016/j.tsf.2007.07.057 ↗
38. Influence of CdCl2 treatment on structural and optical properties of vacuum evaporated CdTe thin films10.1016/j.solmat.2005.04.006 ↗
39. Preparation and characterization of pulsed laser deposited CdTe thin films at higher FTO substrate temperature and in Ar+O2 atmosphere10.1016/j.mseb.2013.03.018 ↗
40. Structural and optical properties of thermally evaporated CdTe film
41. Optical properties and photoconductivity of undoped and in-doped CdTe thin films
42. Effect of some preparative parameters on optical properties of spray deposited iridium oxide thin films10.1016/j.physb.2009.04.003 ↗
43. Optical Properties and Activation Energy of a Novel System of CdTe Nanoparticles Embedded in Phosphate Glass Matrix10.4236/jmp.2011.28108 ↗
44. Determination of the thickness and optical constants of amorphous silicon10.1088/0022-3735/16/12/023 ↗
45. J.D.Patterson, B.C.Bailey, Solid-State Physics, Second Ed. New York, 2010.10.1007/978-3-642-02589-1 ↗
46. A simple method for the determination of the optical constants n, k and the thickness of a weakly absorbing thin film10.1088/0022-3735/9/11/032 ↗
47. Influence of composition on optical and dispersion parameters of thermally evaporated non-crystalline Cd50S50−xSex thin films10.1016/j.jallcom.2015.06.231 ↗
48. Synthesis and optical characterization of nanocrystalline CdTe thin films10.1016/j.optlastec.2010.03.007 ↗
49. Comments on the evidence for sharp and gradual optical absorption edges in amorphous germaniuma10.1002/pssb.2220600132 ↗
50. Photoinduced absorption edge shift of As20Se60Tl20 films10.1016/j.jlumin.2009.11.036 ↗
51. Effect of cadmium addition on the optical constants of thermally evaporated amorphous Se–S–Cd thin films10.1016/j.cap.2009.05.010 ↗
52. Validity of Swanepoel's method for calculating the optical constants of thick films10.12693/APhysPolA.121.628 ↗
53. Effect of antimony addition on the optical behaviour of germanium selenide thin films10.1088/0022-3727/41/22/225307 ↗
54. Comparison of optical properties of bulk and nano crystalline thin films of cds using different precursors
55. A study of the optical bandgap energy and Urbach tail of spray-deposited CdS:In thin films10.1016/j.jmrt.2013.02.012 ↗
56. An investigation of the bandgap and Urbach tail of vacuum-evaporated SnO2 thin films10.1016/j.renene.2012.01.045 ↗
57. Evolution of structural disorder using Raman spectra and Urbach energy in GeSe0.5S1.5 thin films10.1016/j.jnoncrysol.2014.08.029 ↗
58. Extending photocatalytic activity of TiO2 nanoparticles to visible region of illumination by doping of cerium10.1111/j.1751-1097.2011.01064.x ↗
59. Kumarasinghe · J. Mater. Sci: Mater. Electron · 2016
60. Molecular beam epitaxial growth of CdTe, HgTe, and Hg1−xCdx Te alloys10.1116/1.582789 ↗