journal article·2026-03Open access

Progress and critical challenges in slicing of thin semiconductor wafers using ultra-fine diamond wire

Peiqi Ge, Zhecan Cao, Zongqiang Li, Peizhi Wang, Wenbo Bi, Mengran Ge, Wenkun Xie, Xu Xing

Abstract

Diamond wire sawing (DWS) has emerged as the dominant wafer slicing technology owing to its superior surface quality, reduced kerf loss, and high processing efficiency. To further reduce costs, the industry is pursuing thinner wafers (<150 μm for photovoltaic silicon) and adopting finer diamond wires (<35 μm in diameter) to maximize yield per ingot. However, slicing of such thin wafers with ultra-fine diamond wires poses significant technical barriers to widespread adoption. This paper presents a systematic review of progress in wafer thinning and wire diameter reduction for slicing, with emphasis placed particularly on critical challenges for industrial implementation. The main challenges can be summarized as follows: thin wafers exhibit an elevated breakage rate owing to the intrinsic brittleness of silicon in combination with increasing wafer dimensions; saw marks with depths on the order of several micrometers can substantially deteriorate device performance and impose additional complexity on subsequent surface treatment processes; wafer warp becomes increasingly pronounced as thickness decreases, resulting in handling difficulties and yield losses during wafer fabrication; and the use of ultra-fine wires (<35 μm) accelerates wire wear and breakage, thereby increasing wire-related costs and potentially degrading the quality of the sliced wafers. The review begins by examining the fundamental principles of DWS, covering both cutting mechanisms and wire characteristics. It then analyzes the underlying causes of these key challenges and their potential impacts on slicing performance. Finally, the paper outlines potential solutions and future research directions for advancing thin-wafer slicing technology with ultra-fine diamond wires.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Silicon crystal growth and wafer technologies10.1109/JPROC.2012.2189786 ↗
2. Fractal analysis on the surface topography of monocrystalline silicon wafers sawn by diamond wire10.1016/j.mssp.2024.108588 ↗
3. Effect of mechanical load on atomic-scale fabrication based on local anodic oxidation10.1007/s41871-025-00258-9 ↗
4. A wafer-based monocrystalline silicon photovoltaics road map: utilizing known technology improvement opportunities for further reductions in manufacturing costs10.1016/j.solmat.2013.01.030 ↗
5. Status and perspectives of crystalline silicon photovoltaics in research and industry10.1038/s41578-022-00423-2 ↗
6. Basic mechanisms and models of multi‐wire sawing10.1002/adem.200400578 ↗
7. Effect of reciprocating wire slurry sawing on surface quality and mechanical strength of as-cut solar silicon wafers10.1016/j.precisioneng.2013.08.003 ↗
8. Loss of wire tension in the wire web during the slurry based multi wire sawing process10.1016/j.solmat.2013.05.047 ↗
9. Challenges of the wire saw wafering process
10. Recent advances in precision diamond wire sawing monocrystalline silicon10.3390/mi14081512 ↗
11. Material removal and surface generation mechanisms in diamond wire sawing of silicon crystal10.1016/j.mssp.2019.104642 ↗
12. A comprehensive review of diamond wire sawing process for single-crystal hard and brittle materials10.1016/j.jmapro.2024.09.093 ↗
13. Wire sawing technology: a state-of-the-art review10.1016/j.precisioneng.2015.08.008 ↗
14. Fixed abrasive diamond wire saw slicing of single-crystal silicon carbide wafers10.1081/AMP-120029960 ↗
15. Diamond wire sawing of solar silicon wafers: a sustainable manufacturing alternative to loose abrasive slurry sawing10.1016/j.promfg.2018.02.156 ↗
16. Modeling of electroplated diamond wire and its application towards precision slicing of semiconductors10.1016/j.jmapro.2023.01.003 ↗
17. 2024 · 2023
18. Determination of sawing temperature in multi-diamond wire sawing of mono-crystalline silicon carbide10.1016/j.cirpj.2025.04.004 ↗
19. New laser slicing technology named KABRA process enables high speed and high efficiency SiC slicing
20. Deformation characteristics and subsurface damage of monocrystalline silicon under repeated nano-scratching10.1016/j.mssp.2024.109169 ↗
21. Understanding crack initiation and propagation mechanisms of ZnO crystals induced by nanoindentation and nanoscratch
22. The study of crack damage and fracture strength for single crystal silicon wafers sawn by fixed diamond wire10.1016/j.mssp.2021.106017 ↗
23. Crystal damage and surface morphology in industrial diamond wire slicing of 300 mm monocrystalline silicon wafers for microelectronic devices10.1002/admt.202401432 ↗
24. Effect of diamond wire saw marks on solar cell performance10.1016/j.egypro.2016.07.117 ↗
25. Comparative analysis of mechanical strength of diamond-sawn silicon wafers depending on saw mark orientation, crystalline nature and thickness10.1016/j.solmat.2019.110068 ↗
26. Action mechanism of liquid bridge between electroplated diamond wires for ultrathin wafer slicing10.1016/j.solener.2021.11.069 ↗
27. Ductile-regime grinding: a new technology for machining brittle materials10.1115/1.2899676 ↗
28. Critique of materials‐based models of ductile machining in brittle solids10.1111/jace.17344 ↗
29. Science and art of ductile grinding of brittle solids10.1016/j.ijmachtools.2020.103675 ↗
30. Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments10.1016/j.mssp.2017.10.027 ↗
31. Study on ductile-brittle transition of single crystal silicon by a scratching test using a single diamond tool
32. Ductile-brittle transition detection in scratching of single crystal silicon using charged particle emissions10.1016/j.procir.2020.02.013 ↗
33. Effect of speed on material removal behavior in scribing of monocrystalline silicon10.1016/j.precisioneng.2020.07.011 ↗
34. Modeling and experiment of the critical depth of cut at the ductile–brittle transition for a 4H-SiC single crystal10.3390/mi10060382 ↗
35. Effect of anisotropy on 4H-SiC cracking behavior during diamond wire sawing10.1016/j.engfracmech.2024.110427 ↗
36. Atomistic understanding of ductile-to-brittle transition in single crystal Si and GaAs under nanoscratch10.1016/j.ijmecsci.2024.109689 ↗
37. Use of nanoindentation and nanoscratching tests to characterize the ductile-brittle transition10.1166/asl.2011.1644 ↗
38. Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals10.1016/j.ijmachtools.2021.103827 ↗
39. Understanding the damage evolution of sapphire under scratching from AE signals10.1016/j.ceramint.2020.07.103 ↗
40. Anisotropic mechanism of material removal and ductile-brittle transition in sapphire scratching based on acoustic emission signal10.1016/j.jmrt.2024.07.017 ↗
41. Indentation fracture: principles and applications10.1007/BF00823224 ↗
42. Unique crack behaviors of glass BK7 occurred in successive double scratch under critical load of median crack initiation10.1016/j.jeurceramsoc.2020.02.049 ↗
43. A critical review on criteria of fracture mechanics
44. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
45. Elastic/plastic indentation damage in ceramics: the lateral crack system10.1111/j.1151-2916.1982.tb10782.x ↗
46. Material removal mechanism and crack propagation in single scratch and double scratch tests of single-crystal silicon carbide by abrasives on wire saw10.1016/j.ceramint.2018.09.178 ↗
47. Nano-scale elastic-plastic properties and indentation-induced deformation of single crystal 4H-SiC10.1016/j.jmbbm.2016.11.013 ↗
48. Study of ductile-to-brittle transition in single grit diamond scribing of silicon: application to wire sawing of silicon wafers10.1115/1.4006177 ↗
49. Modeling and simulation of phase transformation and crack formation during scribing of mono-crystalline silicon10.1016/j.ijmecsci.2020.105527 ↗
50. Estimating mode II fracture energy of rocks using the scratch test and phase field modeling10.1007/s11440-023-02104-y ↗
51. Phase field modeling of Hertzian indentation fracture10.1016/j.jmps.2020.104026 ↗
52. Analysis of grit interference mechanisms for the double scratching of monocrystalline silicon carbide by coupling the FEM and SPH10.1016/j.ijmachtools.2017.04.012 ↗
53. Coupled SPH-FEM modeling of Berkovich indenter scratching of single-crystal silicon10.1016/j.mssp.2024.108155 ↗
54. A study of scratch speed effects on ductile–brittle transition in silicon10.1115/1.4043647 ↗
55. Strain rate effect on material deformation and removal behavior during high speed scratching of 4H‐SiC10.1016/j.triboint.2023.108756 ↗
56. The ‘skin effect’of subsurface damage distribution in materials subjected to high-speed machining10.1088/2631-7990/ab103b ↗
57. Effect of wire speed on subsurface cracks in wire sawing process of single crystal silicon carbide10.1016/j.engfracmech.2017.09.002 ↗
58. Fundamental investigation on damage evolution and material removal mechanism in scratching anisotropic brittle material10.1016/j.triboint.2024.109764 ↗
59. Understand anisotropy dependence of damage evolution and material removal during nanoscratch of MgF2 single crystals10.1088/2631-7990/ac9eed ↗
60. Anisotropy mechanism of material removal and damage formation in single crystal 4H-SiC scratching10.1016/j.jmatprotec.2025.118768 ↗
61. Stress analysis in scratching of anisotropic single-crystal silicon carbide10.1016/j.ijmecsci.2018.03.042 ↗
62. Fracture toughness and surface energies of covalent minerals: theoretical estimates10.1016/j.mineng.2003.09.006 ↗
63. Interaction of indentation‐induced cracks on single‐crystal silicon carbide10.1111/jace.13525 ↗
64. Orientation dependence of fracture toughness measured by indentation methods and its relation to surface energy in single crystal silicon10.1007/s10704-006-0021-7 ↗
65. Anisotropy in fracture of single crystal silicon film characterized under uniaxial tensile condition10.1016/j.sna.2004.06.003 ↗
66. Velocity correlated crack front and surface marks in single crystalline silicon10.1038/s41467-018-03642-w ↗
67. Material removal of optical glass BK7 during single and double scratch tests10.1016/j.wear.2010.10.064 ↗
68. Subsurface damage model in single and double scratching of fused silica with a blunt indenter10.1016/j.ijmecsci.2023.108309 ↗
69. Material removal and deformation mechanism in multiple nanoscratches of single crystal MgAl2O4
70. Interaction of lateral cracks in double scratching of single-crystal silicon carbide10.1016/j.tafmec.2019.102378 ↗
71. The interaction of periodically distributed parallel cracks in anisotropic materials subjected to concentrated loads10.1016/j.engfracmech.2018.05.028 ↗
72. A representation points based method for object detection on the surface of electroplated diamond wire saw10.1016/j.jmapro.2023.10.023 ↗
73. MRF based image stitching of electroplated diamond wire saw: for improving visual inspection accuracy of manufacturing quality10.1016/j.measurement.2023.112486 ↗
74. Subsurface crack damage in silicon wafers induced by resin bonded diamond wire sawing10.1016/j.mssp.2016.10.021 ↗
75. Influence of diamond wire saw slicing parameters on (010) lattice plane beta-gallium oxide single crystal wafer10.1016/j.mssp.2021.105939 ↗
76. Effect of cutting parameters on surface integrity of monocrystalline silicon sawn with an endless diamond wire saw10.1016/j.solener.2020.07.018 ↗
77. Study on diamond wire wear, surface quality, and subsurface damage during multi-wire slicing of c-plane sapphire wafer10.1007/s00170-018-2656-8 ↗
78. Effect of grit shape and crystal structure on damage in diamond wire scribing of silicon10.1111/jace.14732 ↗
79. Experiment and theoretical prediction for subsurface microcracks and damage depth of multi-crystalline silicon wafer in diamond wire sawing10.1016/j.engfracmech.2022.108391 ↗
80. Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon10.1016/j.precisioneng.2017.04.011 ↗
81. Analytical prediction of subsurface microcrack damage depth in diamond wire sawing silicon crystal10.1016/j.mssp.2020.105015 ↗
82. Evaluation of fixed abrasive diamond wire sawing induced subsurface damage of solar silicon wafers10.1016/j.jmatprotec.2019.116267 ↗
83. Generation of diamond wire sliced wafer surface based on the distribution of diamond grits10.1007/s12541-014-0401-2 ↗
84. Prediction of excess kerf loss in diamond wire sawing based on vibration source signal measurement and processing
85. Fracture strength of silicon wafers sawn by fixed diamond wire saw10.1016/j.solener.2017.08.063 ↗
86. Characterization of multicrystalline silicon solar wafers fracture strength and influencing factors
87. A critical review on the fracture of ultra-thin photovoltaics silicon wafers10.1016/j.solmat.2024.112999 ↗
88. Modeling and experimental investigation of monocrystalline silicon wafer cut by diamond wire saw10.1016/j.engfracmech.2022.109029 ↗
89. Breakage ratio of silicon wafer during fixed diamond wire sawing10.3390/mi13111895 ↗
90. The impact of silicon brick polishing on thin (120 μm) silicon wafer sawing yields and fracture strengths in diamond-wire sawing10.1016/j.mssp.2019.104751 ↗
91. Mechanical strength problem of thin silicon wafers (120 and 140 μm) cut with thinner diamond wires (Si kerf 120→ 100 μm) for photovoltaic use10.1016/j.mssp.2020.105209 ↗
92. Effect of capillary adhesion on fracture of photovoltaic silicon wafers during diamond wire slicing10.1016/j.solener.2022.04.029 ↗
93. Effect of liquid bridge on the thickness deviation between wafers sawn by diamond wire10.1016/j.jmapro.2023.11.016 ↗
94. Experimental study on the formation mechanism of saw marks in wire sawing10.1016/j.ijmecsci.2023.108894 ↗
95. On the nature and removal of saw marks on diamond wire sawn multicrystalline silicon wafers10.1016/j.mssp.2014.06.049 ↗
96. Pattern saw marks on diamond wire cut wafers-from wafer to module
97. Automatic saw-mark detection in multicrystalline solar wafer images10.1016/j.solmat.2011.03.025 ↗
98. Improvement of wire marks on the surface of Si3N4 ceramics cut by diamond wire saw10.1016/j.mseb.2024.117725 ↗
99. Investigation of long waviness induced by the wire saw process10.1177/2041297510393620 ↗
100. Three-dimensional dynamic model of wire sawing for saw marks control10.1016/j.ijmecsci.2024.109892 ↗