journal article·2025-03

Deformation characteristics and subsurface damage of monocrystalline silicon under repeated nano-scratching

Yang He, Liangchi Zhang

Publisher page

Abstract

In the context of grinding and polishing of monocrystalline silicon, abrasive particles repeatedly scratch the surface. The resultant subsurface damage significantly degrades the performance of monocrystalline silicon as a semiconductor substrate or optical component. However, the exact mechanism of material removal in monocrystalline silicon subjected to repeated nano-scratching remains inadequately understood. To address this gap, we conducted an in-depth study of the deformation characteristics of monocrystalline silicon via repeated nano-scratch tests. The nano-scratching was performed using atomic force microscopy (AFM) with a diamond tip, which had a radius of approximately 62 nm, under a normal load of about 23 μN. We employed scanning electron microscopy and transmission electron microscopy to analyze the states of the removed material, focusing on the mechanisms of material removal in ductile-regime machining. Our findings indicated that the monocrystalline silicon surface was removed through the formation of continuous curved chips composed of amorphous phase structures. Subsurface deformation from a single nano-scratching was through amorphization and machining defects, including dislocations, stacking faults, and lattice distortions. With repeated nano-scratching, these defects further underwent amorphization and became randomly distributed, rather than occurring in the <111> direction. Moreover, the subsurface defects exhibited a tendency not to expand or penetrate deeper with increasing nano-scratching cycles. This study provides crucial insights into the evolution of subsurface damage under repeated nano-scratching, offering valuable guidance for optimizing grinding and polishing processes to achieve high-quality subsurface and further enhance the performance of monocrystalline silicon.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Materials: silicon and beyond10.1016/j.sna.2019.07.009 ↗
2. Mid-infrared silicon-on-lithium-niobate electro-optic modulators toward integrated spectroscopic sensing systems10.1002/adom.202202228 ↗
3. Damage-free polishing of monocrystalline silicon wafers without chemical additives10.1016/j.scriptamat.2008.08.002 ↗
4. An investigation of monitoring the damage mechanism in ultra-precision grinding of monocrystalline silicon based on AE signals processing10.1016/j.jmapro.2022.07.055 ↗
5. Modeling of the removal mechanism of monocrystalline silicon-based on phase change-dislocation theory and its edge chipping damage during micro-grinding10.1016/j.precisioneng.2021.03.001 ↗
6. Mechanical effect of abrasives on silicon surface in chemo-mechanical grinding10.1016/j.ijmecsci.2023.108544 ↗
7. What micro-mechanical testing can reveal about machining processes10.1016/j.ijmachtools.2022.103964 ↗
8. Nanometric cutting: mechanisms, practices and future perspectives10.1016/j.ijmachtools.2022.103905 ↗
9. Nanoindentation induced anisotropy of deformation and damage behaviors of MgF2 crystals10.1016/j.jmrt.2024.01.034 ↗
10. Exploring the structural color of micro-nano composite gratings with FDTD simulation and experimental validation10.1364/OE.510400 ↗
11. Material removal mechanisms of single-crystal silicon on nanoscale and at ultralow loads10.1016/S0043-1648(98)00302-0 ↗
12. Effect of crystallographic orientation on phase transformations during indentation of silicon10.1557/jmr.2009.0122 ↗
13. Towards understanding the machining mechanism of the atomic force microscopy tip-based nanomilling process10.1016/j.ijmachtools.2021.103701 ↗
14. Study on the vertical ultrasonic vibration-assisted nanomachining process on single-crystal silicon10.1115/1.4052356 ↗
15. In-situ SEM cyclic nanoindentation of pre-sintered and sintered zirconia materials10.1016/j.jmbbm.2021.105068 ↗
16. Behavior of monocrystalline silicon under cyclic microindentations with a spherical indenter10.1063/1.1541110 ↗
17. Effect of repeated nano-indentations on the deformation in monocrystalline silicon10.1023/A:1006707325288 ↗
18. Structure changes in mono-crystalline silicon subjected to indentation — experimental findings10.1016/S0301-679X(99)00103-6 ↗
19. The mechanical behavior of silicon during small-scale indentation10.1007/BF02652912 ↗
20. New insights into phase transformations in single crystal silicon by controlled cyclic nanoindentation10.1016/j.scriptamat.2015.02.008 ↗
21. Microstructure evolution in monocrystalline silicon in cyclic microindentations10.1557/JMR.2003.0104 ↗
22. On the mechanism of secondary pop-out in cyclic nanoindentation of single-crystal silicon10.1557/jmr.2015.120 ↗
23. Towards understanding the mechanism of vibration-assisted cutting of monocrystalline silicon by cyclic nanoindentation10.1016/j.jmatprotec.2022.117797 ↗
24. Understanding pressure-induced phase-transformation behavior in silicon through in situ electrical probing under cyclic loading conditions10.1063/1.3130154 ↗
25. Cyclic microindentations on monocrystalline silicon in air and in water10.1243/095440604774202222 ↗
26. The plasticity of monocrystalline silicon under nanoindentation10.1142/S0217979208051522 ↗
27. Towards a deeper understanding of plastic deformation in mono-crystalline silicon10.1016/S0020-7403(01)00024-8 ↗
28. Nanoscratch-induced phase transformation of monocrystalline Si10.1016/j.scriptamat.2010.06.034 ↗
29. A study on mechanism of nano-cutting single crystal silicon10.1016/j.jmatprotec.2006.12.007 ↗
30. Atomistic understanding of the subsurface damage mechanism of silicon (100) during the secondary nano-scratching processing10.1016/j.mssp.2022.106624 ↗
31. Method for the calibration of atomic force microscope cantilevers10.1063/1.1145439 ↗
32. Modelling and experimental study of machined depth in AFM-based milling of nanochannels10.1016/j.ijmachtools.2013.07.001 ↗
33. Effect of tool rake angle on the material removal mechanism transition of single-crystal silicon: a molecular dynamics study10.1007/s00170-021-07391-x ↗
34. Finite element analysis of the effect of tool rake angle on brittle-to-ductile transition in diamond cutting of silicon10.1007/s00170-019-03888-8 ↗
35. Modelling and experimental investigation on nanometric cutting of monocrystalline silicon10.1016/j.ijmachtools.2005.03.010 ↗
36. A numerical study on the material removal and phase transformation in the nanometric cutting of silicon10.1016/j.apsusc.2018.05.091 ↗
37. Study on machinability of silicon irradiated by swift ions10.1016/j.precisioneng.2017.10.013 ↗
38. Nanoindentation of silicon nitride: a multimillion-atom molecular dynamics study10.1063/1.1535263 ↗
39. Nanometric cutting of silicon with an amorphous-crystalline layered structure: a molecular dynamics study10.1186/s11671-017-1829-y ↗
40. Influence of buried modified layer on crack propagation and diamond turning of silicon10.1016/j.precisioneng.2018.10.011 ↗
41. Effect of scratching speed on phase transformations in high-speed scratching of monocrystalline silicon10.1016/j.msea.2019.138836 ↗