journal article·2025-03

Characterization of machined surface in semi-conductive SiC wafer subjected to micro-EDM drilling

Hoang-Tien Cao, Jeng-Rong Ho, Pi-Cheng Tung, Hai-Ping Tsui, Chih-Kuang Lin

Publisher page

Abstract

Semi-conductive silicon carbide (semi-SiC) wafers are essential in the semiconductor industry, but their high hardness and brittleness make traditional machining difficult. Electric discharge machining (EDM) is an alternative method for machining semi-SiC wafer. This study investigates the effects of discharge energy parameters, such as pulse-on time and peak current, on the surface and subsurface characteristics of semi-SiC wafers subjected to micro-EDM drilling. The machined surface and subsurface morphology and microstructure were characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). SEM micrographs revealed the presence of craters, resolidified material, cracks, and micro-pores on the machined surface, influenced by the thermal energy generated during the EDM process. The material removal mechanisms identified include melting, vaporization, spalling, and oxidation. EDS analyses indicated a larger discharge energy led to an increase in carbon and oxygen concentrations on the machined surfaces, likely due to the decomposition of SiC and oxidation during EDM. XPS analysis identified the presence of graphite, SiO 2, Cu particles, Cu 2O, and CuO on the machined surface. TEM micrographs revealed three distinct regions in the subsurface, namely a recast layer, a heat-affected zone (HAZ), and the unaffected bulk SiC. These layers exhibited different microstructures, with the thickness of the recast layer and HAZ being dependent on the discharge energy. This study highlights the advantages of micro-EDM over other techniques, achieving a thin recast layer and minimal HAZ, thereby preserving the surface and subsurface integrity of the semi-SiC wafer.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Harsh environment materials
2. Silicon carbide electronic devices
3. Fabrication and testing of surface micromachined silicon carbide micromotors
4. Exploring the nonlinear piezoresistive effect of 4H-SiC and developing MEMS pressure sensors for extreme environments10.1038/s41378-023-00496-1 ↗
5. Etching of silicon carbide for device fabrication and through via-hole formation10.1007/s11664-001-0018-y ↗
6. Past and current trends in electric discharge based machining of silicon carbide
7. An overview of electric discharge machining of ceramics and ceramic based composites10.1016/j.jmapro.2016.12.010 ↗
8. A comprehensive review of electric discharge machining of advanced ceramics10.1016/j.ceramint.2020.05.207 ↗
9. EDM-future steps towards the machining of ceramics10.1016/S0007-8506(07)60759-8 ↗
10. EDM mechanism of single crystal SiC with respect to thermal, mechanical and chemical aspects10.1016/j.jmatprotec.2016.05.010 ↗
11. Machined quality prediction and optimization for micro-EDM drilling of semi-conductive SiC wafer10.1016/j.mssp.2023.107911 ↗
12. Assisting electrode method for machining insulating ceramics10.1016/S0007-8506(07)63047-9 ↗
13. Electrical discharge machining phenomena of insulating sialon ceramics with an assisting electrode10.2526/ijem.2.25 ↗
14. A new machining method for insulating ceramics with an electrical discharge phenomenon10.2109/jcersj.103.1000 ↗
15. Experimental study of EDM-drilling and shaping of SiSiC and SiC10.1016/j.procir.2016.02.269 ↗
16. Machining characteristics of 65 vol.% SiCp/Al composite in micro-WEDM10.1016/j.ceramint.2021.01.212 ↗
17. Influence of dielectric type on porosity formation on electrical discharge machined surfaces10.1007/s11663-012-9653-3 ↗
18. Identification of wire electrical discharge machinability of SiC sintered using rapid hot pressing technique10.1016/j.ceramint.2020.04.013 ↗
19. Characterization of electric discharge machining for silicon carbide single crystal
20. An experimental investigation for electric discharge milling of SiC ceramics with high electrical resistivity10.1016/j.jallcom.2008.04.072 ↗
21. Surface and subsurface damage of reaction-bonded silicon carbide induced by electrical discharge diamond grinding10.1016/j.ijmachtools.2020.103564 ↗
22. EDM technology and strategy development for the manufacturing of complex parts in SiSiC10.1016/j.jmatprotec.2009.11.012 ↗
23. Atomic-scale characterization of subsurface damage and structural changes of single-crystal silicon carbide subjected to electrical discharge machining10.1016/j.actamat.2016.10.045 ↗
24. Experimental investigation into the micro-EDM characteristics of conductive SiC10.1016/j.ceramint.2015.09.111 ↗
25. Micro-EDM drilling of ZrB2-SiC-graphite composite using micro sheet-cylinder tool electrode10.1007/s00170-017-0296-z ↗
26. Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide10.1016/j.apsusc.2013.03.161 ↗
27. The state of the art of electrical discharge drilling: a review10.1007/s00170-022-09549-7 ↗
28. Surface integrity studies on ZrB2 and graphene reinforced ZrB2 ceramic matrix composite in EDM process10.1016/j.cirpj.2022.04.010 ↗
29. Study of the recast layer of a surface machined by sinking electrical discharge machining using water-in-oil emulsion as dielectric10.1016/j.apsusc.2011.01.083 ↗
30. Study of small holes on monocrystalline silicon cut by WEDM10.1016/j.mssp.2012.09.006 ↗
31. Material removal and surface damage in EDM of Ti3SiC2 ceramic10.1016/j.ceramint.2006.11.007 ↗
32. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
33. Surface integrity and material removal mechanisms associated with the EDM of Al2O3 ceramic composite10.1016/j.ijrmhm.2009.05.003 ↗
34. Influence of discharge current waveform on surface metamorphic layer in electrical discharge machining10.1007/s00170-021-07738-4 ↗
35. White layer composition, heat treatment, and crack formation in electric discharge machining process10.1007/s11663-008-9220-0 ↗
36. Thermal stresses due to electrical discharge machining10.1016/S0890-6955(02)00029-9 ↗
37. Evaluation of micro-EDM (μEDM) characteristics of conductive silicon carbide using a coupled thermo-structural process model10.1142/S0219686718500245 ↗
38. Engineered materials handbook
39. Material removal by spalling during EDM of ceramics10.1016/S0955-2219(00)00027-3 ↗
40. Investigation of material removal mechanisms in EDM of composite ceramic materials10.1016/j.jmatprotec.2004.02.013 ↗
41. Experimental investigation of EDM parameters for TiC/Ni cermet machining10.1016/j.procir.2016.02.177 ↗
42. Surface characteristics and damage of monocrystalline silicon induced by wire-EDM10.1016/j.apsusc.2014.09.074 ↗
43. XPS analysis of SiC films prepared by radio frequency plasma sputtering10.1016/j.phpro.2012.03.524 ↗
44. Silicon nanowires terminated with methyl functionalities exhibit stronger Si-C bonds than equivalent 2D surfaces10.1039/b820559k ↗
45. X-ray photoelectron studies on some oxides and hydroxides of cobalt, nickel, and copper10.1021/ac60363a034 ↗
46. Comparison study on the stability of copper nanowires and their oxidation kinetics in gas and liquid10.1021/acsnano.6b00704 ↗
47. A novel method of etching copper oxide using acetic acid10.1149/1.1409400 ↗
48. Peak-fitting of Cu 2p photoemission spectra in Cu0, Cu1+, and Cu2+ oxides: a method for discriminating Cu0 from Cu1+10.1016/j.apsusc.2023.156960 ↗
49. High temperature gas sensing performances of silicon carbide nanosheets with an n–p conductivity transition10.1039/C8RA02164C ↗
50. SiOx surface stoichiometry by XPS: a comparison of various methods10.1002/sia.740220122 ↗
51. Non-oxidized bare copper nanoparticles with surface excess electrons in air10.1038/s41565-021-01070-4 ↗
52. Recast layer and heat-affected zone structure of ultra-fined grained low-carbon steel machined by electrical discharge machining10.1177/0954405419889202 ↗
53. TEM study on the electrical discharge machined surface of single-crystal silicon10.1016/j.jmatprotec.2012.11.028 ↗
54. Failure detection and control for wire EDM process using multiple sensors10.1016/j.cirpj.2021.04.009 ↗
55. Analysis of characteristic process parameters to identify unstable process conditions during wire EDM10.1016/j.promfg.2018.11.018 ↗
56. Control principle of anodic discharge for enhanced performance in jet-electrochemical discharge machining of semiconductor 4H-SiC10.1016/j.jmapro.2023.03.007 ↗
57. Analysis of materials modifications caused by UV laser micro drilling of via holes in AlGaN/GaN transistors on SiC10.1016/j.apsusc.2007.02.076 ↗
58. An investigation of recast behavior in laser ablation of 4H-silicon carbide wafer10.1016/j.mssp.2019.104701 ↗
59. Micromachining of 4H-SiC using femtosecond laser10.1016/j.ceramint.2018.06.245 ↗
60. Laser slicing of 4H-SiC wafers based on picosecond laser-induced micro-explosion via multiphoton processes10.1016/j.optlastec.2022.108323 ↗
61. Post-illumination activity of SnO2 nanoparticle-decorated Cu2O nanocubes by H2O2 production in dark from photocatalytic “memory,”
62. Controllable wet synthesis of multicomponent copper-based catalysts for Rochow reaction10.1039/C5RA10999J ↗
63. Characterizations of laser transmission welding of glass and copper using nanosecond pulsed laser10.1007/s00170-023-12838-4 ↗
64. More features, more tools, more CrysTBox10.1107/S1600576717006793 ↗
65. Improved crystallographic data for graphite10.1154/1.1536926 ↗
66. Carbon structures in silicon carbide derived carbon10.1016/j.jmatprotec.2006.03.103 ↗
67. The C−Si (carbon-silicon) system, Bull. Alloy Ph10.1007/BF02872902 ↗
68. Formation process of graphene on SiC (0001)10.1016/j.physe.2009.11.151 ↗