Synthesis, structural characterization, and photoluminescence properties of Dy3+-Doped CaB4O7 Phosphors: Influence of Li+ and K+ Co-doping
Source abstract
Abstract
This study examines the structural and photoluminescence properties of Dy3+-doped CaB4O7 phosphors co-doped with Li+ and K+, synthesized via the high-temperature solid-state reaction method. X-ray diffraction (XRD) and Rietveld refinement confirmed the successful incorporation of Dy3+ (substituting for Ca2+), Li+ (interstitial), and K+ (interstitial) ions within the CaB4O7 lattice at co-doping concentrations of x = 0.02 wt percent (wt%), y = 0.05 wt%, and z = 0.10 wt%, respectively. This co-doping induced localized lattice distortions while maintaining the overall crystal symmetry. Fourier-transform infrared (FTIR) and Raman spectroscopy reveal modifications in borate network vibrational modes, indicating the stabilizing effects of Li+ and K+ co-doping. Photoluminescence (PL) analysis demonstrates an unusually intense red emission (4F9/2 -> 6H11/2), deviating from typical Dy3+ emission trends, which is attributed to local symmetry distortions and enhanced electric dipole transitions. JuddOfelt analysis confirms a high Omega 6 parameter (5.42 x 10-20 cm2), further supporting this enhancement. Li+ co-doping significantly enhances PL, increasing yellow emission by a factor of 7.64 and red emission by 4.03. Similarly, K+ co-doping influences the crystal field environment, leading to a 6.36-fold boost in yellow luminescence and a 3.60-fold increase in red luminescence. Temperature-dependent PL studies reveal an anti-thermal quenching effect, with red emission intensity increasing up to 550 K, indicating potential applications in high-temperature environments. The findings demonstrate that Li+ and K+ co-doping modulates the emission characteristics of Dy3+-doped CaB4O7, reinforcing its applicability in solid-state lighting and optoelectronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Microwave Dielectric Ceramics Synthesis · Crystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Comparison of Dy3+-doped barium borate and lithium aluminoborate glass10.1016/j.optmat.2022.112339 ↗
2. Photoluminescence properties of Ca2Al2O5 :RE3+ (RE = Eu, Dy and Tb) phosphors for solid state lighting10.1002/bio.3340 ↗
3. Manhas · Synthesis and photoluminescence properties of Ca3B2O6:Tb3+ nanophosphors · 2014 · 502
4. Near UV-photons excited highly pure and thermally stable Ca2B2O5: Sm3+ phosphor for filling the amber gap10.1016/j.inoche.2023.111885 ↗
5. Enhanced photoluminescence property of CaB2O4:Eu3+ phosphor prepared by calcining the Ca4B10O19·7H2O:Eu3+ precursor10.1016/j.materresbull.2013.08.010 ↗
6. Study of luminescence of Mn-doped CaB4O7 prepared by wet chemical method10.1016/j.jallcom.2016.05.050 ↗
7. Intense white light luminescent Dy3+ doped lithium borate glasses for W-LED: a correlation between physical, thermal, structural and optical properties10.1016/j.solidstatesciences.2016.12.009 ↗
8. Luminescence thermal enhancement of Eu3+ using charge transfer band excitation in Li6Zn3(BO3)4:Eu3+ phosphors10.1007/s10854-023-11420-8 ↗
9. Photoluminescence and thermoluminescence investigations of Ca3B2O6: Sm3+ phosphor10.1088/2053-1591/2/7/075008 ↗
10. Structural, optical, and thermal traits of Sm3+-doped SrB2O4 phosphors for solid-state lighting applications10.1016/j.solidstatesciences.2024.107724 ↗
11. Physical, thermal, structural and optical properties of Dy3+ doped lithium alumino-borate glasses for bright W-LED10.1016/j.jlumin.2016.11.027 ↗
12. Investigation of preparation and photoluminescence properties of europium-doped calcium orthoborate (Ca3B2O6:Eu3+) red phosphor and red LED10.1016/j.ceramint.2024.10.211 ↗
13. Enhanced photoluminescence, electrochemical and photocatalytic activity of combustion synthesized La10Si6O27:Dy3+ nanophosphors10.1016/j.jsamd.2020.10.001 ↗
14. White luminescence in Dy3+ doped BiOCl phosphors and their Judd–Ofelt analysis10.1016/j.dyepig.2015.10.032 ↗
15. Synthesis, structural analysis and investigation of photoluminescence properties of mixed metal cation borates10.1016/j.molstruc.2024.141004 ↗
16. Dy3+ katkılı BaB4O7 bileşiğinin sentezlenmesi ve optiksel özelliklerinin araştırılması, afyon kocatepe univ
17. Synthesis and photoluminescence characteristics of near white light emitting CaB2O4:Dy3+ , Li+ phosphor10.1016/j.jpcs.2018.03.039 ↗
18. Mechanisms of Li + ions in the emission enhancement of KMg4(PO4)3:Eu2+ for white light emitting diodes10.1021/acs.inorgchem.6b02140 ↗
19. Enhanced luminescence of novel Ca3B2O6:Dy3+ phosphors by Li+-codoping for LED applications10.1016/j.ceramint.2011.08.032 ↗
20. A novel germanate based red-emitting phosphor with high efficiency, high color purity and thermal stability for white light-emitting diodes and field emission displays10.1039/C9QI01428D ↗
21. Dual-emissive Eu3+, Tb3+ co-doped Gd2(MoO4)3 phosphor for optical thermometry application10.1016/j.jpcs.2021.110032 ↗
22. Rare earth ion doped luminescent materials: a review of up/down conversion luminescent mechanism, synthesis, and anti-counterfeiting application10.3390/photonics10091014 ↗
23. The reduction of Eu3+ to Eu2+ in BaMgAl10O17:Eu and the photoluminescence properties of BaMgAl10O17:Eu2+ phosphor
24. A facile route for synthesis of highly pure α-CaB4O7 compound10.1088/2053-1591/aaeec5 ↗
25. Dysprosium ion concentration variations and their comprehensive influence on the physical, structural and optical properties of multi-component borate glasses for luminescence tailoring
26. Effect of Li2O on physical, structural, thermal, optical, and electrical properties of mixed alkali borate glasses containing silver nanoparticles10.1016/j.optmat.2024.116224 ↗
27. Preparation of CaB4O7 nanoparticles doped with different concentrations of Tb3+: photoluminescence and thermoluminescence/optically stimulated luminescence study10.1016/j.jlumin.2018.01.062 ↗
28. Luminescence, lifetime and quantum yield studies of YVO4:Ln3+ (Ln3+= Dy3+, Eu3+) nanoparticles: concentration and annealing effects10.1016/j.cplett.2009.09.006 ↗
29. Structural, optical, and surface analysis of Dy3+ doped Ba2Mg(BO3)2 phosphor for w-LED applications10.1016/j.jlumin.2024.120987 ↗
30. Comparison study of the luminescent properties of the white-light long afterglow phosphors: Ca MgSi2O5:Dy3+(x=1, 2, 3)10.1016/j.jlumin.2008.12.008 ↗
31. Synthesis and luminescence characteristics of Dy3+ doped KLa(PO3)410.1016/j.jlumin.2015.05.018 ↗
32. Synthesis, characterization and photoluminescence properties of CaSiO3:Dy3+ nanophosphors10.1080/14786435.2010.491810 ↗
33. A novel yellowish white Dy3+ activated α Al2O3 phosphor: photoluminescence and optical studies10.1142/S1793604715500617 ↗
34. Luminescent properties of ZrO2:Dy3+ and ZrO2:Dy3++Li+ films synthesized by an ultrasonic spray pyrolysis technique10.1016/j.ceramint.2015.02.048 ↗
35. Photoluminescence properties of Dy3+ activated Ca2SiO4 nanophosphor for WLED applications10.1080/24701556.2017.1357580 ↗
36. Cathodoluminescence and photoluminescence properties of Dy doped La2CaB10O19 phosphor10.1016/j.optmat.2020.110531 ↗
37. Photoluminescence and comparative thermoluminescence studies of UV/γ-irradiated Dy3+ doped bismuth silicate phosphor10.1007/s10854-020-04005-2 ↗
38. Study on an application manner of Judd-Ofelt theory to a phosphor material10.1016/j.optmat.2020.109993 ↗
39. Transition intensities of trivalent lanthanide ions in solids: extending the Judd-Ofelt theory10.1016/j.jlumin.2021.118456 ↗
40. Judd-Ofelt analysis and luminescence properties of newly fabricated Dy3+ infused calcium sulfo-phospho-borate glasses for photonics applications10.1016/j.jallcom.2023.171101 ↗
41. Photoluminescence and afterglow of Dy3+ doped CaAl2O4 derived via sol–gel combustion10.1039/D2RA05008K ↗
42. Investigation of energy transfer and concentration quenching of Dy3+ luminescence in Gd(BO2)3 by means of fluorescence dynamics10.1016/j.jallcom.2013.05.012 ↗
43. Novel Dy incorporated Ca3Y2B4O12 phosphor: insights into the structure, broadband emission, photoluminescence and cathodoluminescence characteristics10.1016/j.apradiso.2022.110257 ↗
44. Temperature-dependent photoluminescence of novel Eu3+, Tb3+, and Dy3+ doped LaCa4O(BO3)3: insights at low and room temperatures10.1016/j.apradiso.2024.111308 ↗
45. Dy3+ and Eu3+ co-activated gadolinium aluminate borate phosphor: synthesis, enhanced luminescence, energy transfer and tunable color10.1016/j.materresbull.2023.112282 ↗
46. A theory of sensitized luminescence in solids10.1063/1.1699044 ↗
47. Thermal quenching of luminescence of LiSr4(BO3)3:Eu2+ orange‐emitting phosphor10.1002/bio.2511 ↗
48. Predicting thermal quenching in inorganic phosphors10.1021/acs.chemmater.0c02231 ↗
49. A photoluminescence study of Eu3+, Tb3+, Ce3+ emission in doped crystals of strontium-barium fluoride borate solid solution Ba4−xSr3+x(BO3)4−yF2+3y (BSBF)10.3390/ma16155344 ↗
50. Large negative-thermal-quenching effect in phonon-induced light emissions in Mn4+ -activated fluoride phosphor for warm-white light-emitting diodes10.1021/acsomega.8b01127 ↗
51. Single-composition white light emission from Dy3+ doped Sr2CaWO610.3390/ma12030431 ↗
52. A study on the anti-thermal Dy3+/Eu3+ Co-doped BaLa4Si3O13 red phosphors for white-light-emitting diodes and optical thermometry applications10.1021/acs.iecr.0c05996 ↗
53. Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications10.1016/j.heliyon.2018.e00555 ↗
54. Excitation spectra and luminescence decay analysis of K+ compensated Dy3+ doped CaMoO4 phosphors10.1039/C4RA12447B ↗
55. Correlated color temperature as an explicit function of chromaticity coordinates10.1002/col.5080170211 ↗