A theoretical investigation of ABO3 (A=Na and B = Ti, In) perovskites for solar cell and optoelectronic applications
Source abstract
Abstract
Oxide-perovskites are becoming the leading aspirants to meet the need for energy conversion and optoelectronics devices. Therefore, Na-based novel oxide-perovskite ABO 3 (A = Na and B=Ti, In) compounds have been investigated for their physical properties within the density functional theory (DFT) based calculations. These calculations show that both compounds comprise a cubic structure with the space group of Pm3m. The general structural stability of these compounds has been evaluated using the formation enthalpy computations. Mechanical stability is confirmed by the results of three elastic coefficients C 11, C 12, and C 44. NaInO 3 shows a ductile character, while NaTiO 3 shows a brittle character. The total density of states (TDOS) and partial density of states (PDOS) confirm the amount of electron concentration in specific bands. The band gap values of 2.12–2.71 eV are reported in the electronic band structures, which makes them more significant for optoelectronic applications. Both NaTiO 3 and NaInO 3 have good refractive indices, low optical reflectivity, small electron energy loss, and a high absorption coefficient in the visible (VIS) and ultraviolet (UV) spectrums. The results of the combined structural, electronic, optical, and mechanical studies demonstrate that both materials are potential candidates for practical applications, particularly in optoelectronic and solar cell technologies. Consequently, these findings can motivate the upcoming theoretical and experimental investigations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Rizwan · 2021 · 602
2. Analysis of XGaO3 (X= Ba and Cs) cubic based perovskite materials for photocatalytic water splitting applications: a DFT study
3. Strain tuned structural, mechanical, electronic, and optical properties of lead-free oxy-nitride SrTaO2N perovskite using first-principles study
4. Gupta · 2024 · 150
5. Stability of perovskite solar cells: issues and prospects10.1039/D2RA05903G ↗
6. An accurate prediction of electronic structure, mechanical stability and optical response of BaCuF3 fluoroperovskite for solar cell application10.1016/j.solener.2023.112199 ↗
7. Enhancing perovskite solar cells and X-ray photodetectors with hybrid MoSe2@ CNT composites: a path to improved efficiency and sensitivity
8. Wei · 2024 · 39
9. First principles prediction of geometrical, electronic, mechanical, thermodynamic, optical and photocatalytic properties of RaZrO3 scrutinized by DFT investigation
10. Account of structural, theoretical, and photovoltaic properties of ABO3 oxide perovskites photoanode‐based dye‐sensitized solar cells10.1002/solr.202100792 ↗
11. Tailoring structural, electronic, elastic and optical properties of Strontium-based XSrO3 (X= Rb, Cs) oxide perovskites employing density functional theory10.1088/1402-4896/ad25b6 ↗
12. Predictive study of structural, electronic, magnetic and thermodynamic properties of XFeO (X= Ag, Zr and Ru) multiferroic materials in cubic perovskite structure: first-principles calculations10.1515/msp-2015-0047 ↗
13. Pressure-induced investigation of structural, electronic, optical, and mechanical properties of BaCeO310.1016/j.optmat.2023.114699 ↗
14. Electronic, magnetic, and magnetocaloric properties of NdMnO3 simple perovskite10.1007/s11664-020-08628-3 ↗
15. Usman · 2024
16. DFT calculation and experimental study on structural, optical and magnetic properties of Co-doped SrTiO310.1016/j.apsusc.2018.02.161 ↗
17. Investigation of the structural, electronic, magnetic, and optical properties of CsXO3 (X= Ge, Sn, Pb) perovskites: a first-principles calculations10.1016/j.ijleo.2021.167536 ↗
18. Tailoring electronic and optical properties of LaAlO3 by Cu inclusion: a DFT study10.1139/cjp-2019-0558 ↗
19. Structural, mechanical and electronic properties of sodium based fluoroperovskites NaXF3 (X= Mg, Zn) from first-principle calculations10.1016/j.mssp.2015.01.040 ↗
20. First-principles investigation of structural, electronic, optical, and mechanical properties of Na-based fluoro-perovskites NaXF3:(X= Ni, Co, Be, Ba)10.1016/j.ijleo.2022.169897 ↗
21. Physical properties of rare earth perovskites CeMO3 (M= Co, Cu) in the context of density functional theory
22. First-principles investigation of structural, electronic, and energetic properties of BaSnO3 (001) surfaces10.1016/j.vacuum.2023.111977 ↗
23. Structural, electronic, optical and mechanical properties of oxide-based perovskite ABO3 (A= Cu, Nd and B= Sn, Sc): a DFT study10.1016/j.jssc.2022.123650 ↗
24. Bibi · 2024
25. Predictions on new Cu-based ABO3 (A= Cu and B= Lu, Y) oxide-perovskite for energy storage and optoelectronic applications: a DFT study
26. Sharme · 2024
27. Structural, electronic, magnetic, and optical properties of MFe2O4 (M= Ni, Fe, Co) spinel ferrites: a density functional theory study
28. Structural, mechanical, electronic and optical properties of MFe2O4 (M= Zn, Cu, Si) ferrites for electrochemical, photocatalytic and optoelectronic applications
29. Akhtar · 2024
30. Ab-initio investigation of the fundamental properties of metals (X= Be, Mg, and Ca) encapsulated CsXO3 tin-based perovskite materials10.1016/j.rio.2023.100506 ↗
31. First-principles study on the structural, electronic, elastic, optical and thermodynamic properties of double antiperovskites X6BiSbN2 (X= Mg, Ca, Sr)10.1016/j.jpcs.2023.111859 ↗
32. Crystal structure and octahedral deformation of orthorhombic perovskite ABO3: case study of SrRuO310.1016/j.jssc.2022.122998 ↗
33. First principle insight into the structural, optoelectronic, half metallic, and mechanical properties of cubic perovskite NdInO 310.1007/s13369-020-04576-6 ↗
34. Theoretical investigation of lead perovskite PbXO3 (X= Ti, Zr, and Hf) for potential thermoelectric applications: hybrid-DFT approach10.1021/acs.energyfuels.3c02797 ↗
35. Aziz · 2024 · 586
36. Elastic, mechanical and thermodynamic properties of technetium-based perovskites XTcO3 (X= K, Rb) compounds10.1016/j.physb.2024.415780 ↗
37. Structure evolution of Ge-doped CaTiO3 (CTG) at high pressure: search for the first 2: 4 locked-tilt perovskite by synchrotron X-ray diffraction and DFT calculations10.1021/acs.inorgchem.3c02645 ↗
38. First principles calculations of structural, electronic, mechanical and thermoelectric properties of cubic ATiO3 (A= Be, Mg, Ca, Sr and Ba) perovskite oxide10.1016/j.cocom.2021.e00562 ↗
39. To investigate the structural, electronic, optical and magnetic properties of Sr-doped KNbO3 for perovskite solar cell applications: a DFT study10.1088/1402-4896/acc6fb ↗
40. A comprehensive first-principles study on the physical properties of Sr2ScBiO6 for low-cost energy technologies
41. Study of mechanical, optical, and thermoelectric characteristics of Ba2XMoO6 (X= Zn, Cd) double perovskite for energy harvesting
42. A theoretical investigation of the lead‐free double perovskites halides Rb2XCl6 (X= Se, Ti) for optoelectronic and thermoelectric applications
43. Outstanding thermoelectric performance of MCu3X4 (M= V, Nb, Ta; X= S, Se, Te) with unaffected band degeneracy under pressure
44. Mahmoud · 2024
45. Wide bandgap oxide semiconductors: from materials physics to optoelectronic devices10.1002/adma.202006230 ↗
46. A first-principles investigation on the structural, electronic and optical characteristics of tetragonal compounds XAgO (X= Li, Na, K, Rb)10.1016/j.cocom.2023.e00876 ↗
47. Insight into the structural, elastic, and optoelectronic properties of XPaO3 (X= Cs, Rb) compounds employing density functional theory10.1016/j.physb.2023.415647 ↗
48. Prediction of dielectric constants of ABO 3-type perovskites using machine learning and first-principles calculations10.1039/D1CP04702G ↗
49. Electronic and optical properties of MAPbX 3 perovskites (X= I, Br, Cl): a unified DFT and GW theoretical analysis
50. Rationalizing performance losses of wide bandgap perovskite solar cells evident in data from the perovskite database
51. Semiconductor photocatalysts: a critical review highlighting the various strategies to boost the photocatalytic performances for diverse applications
52. Kaur · 2024 · 690
53. First-principles calculations to investigate band gap of cubic BaThO3 with systematic isotropic external static pressure and its impact on structural, elastic, mechanical, anisotropic, electronic and optical properties10.1016/j.jpcs.2022.110878 ↗
54. Recent developments of truly stretchable thin film electronic and optoelectronic devices