journal article·2024-03

Screen-printed counter-electrodes based on biochar derived from wood-corn silage and titanium isopropoxide binder as a more efficient and renewable alternative to Pt-CE for dye-sensitized solar cells

Tatiana Buchlová, Michal Hatala, Peter Veteška, Aleš Ház, Patrik Novák, Tomáš Mackuľak, Milan Mikula, Pavol Gemeiner

Publisher page

Abstract

Current research of counter-electrodes (CEs) for dye-sensitized solar cells (DSSCs) focuses mainly on searching for low-cost and mass-production suitable materials as an alternative to standardly used platinum. One of the most studied groups is carbon allotropes, while carbon-enriched materials such as biochar prepared from renewable sources (biomass) show tremendous potential. Structural properties of biochar, electrical conductivity and large specific area predict the possibility of its use as a catalytic material of CE. To ensure printability and efficient contact between the printed catalytic layer and substrate of CE, non-conductive polymer binders, reducing electrical and electrochemical properties of CEs, are standardly used. This work introduces the preparation of screen-printed CEs based on titanium isopropoxide (TTIP) binder and biochar microparticles obtained by pyrolysis of wood and corn silage, which were investigated as an alternative to platinum CE. TTIP was examined as a substitute for the polymer binder ethylcellulose (EC) and as the precursor for TiO 2 nanoparticle synthesis in biochar/TTIP hybrid CEs. Formation of polymer matrix from TTIP ensured the required rheological properties of biochar/TTIP inks and improved interparticle contact and mechanical stability of screen-printed catalytic layers of CEs. Raman spectroscopy indicated the presence of TiO 2 anatase nanoparticles with a size of 5 nm after CEs sintering at 500 °C under an argon atmosphere. The sintering process raised catalytic activity and decreased sheet resistance of CEs in the presence of I 3 −/I − electrolyte, resulting in enhanced photovoltaic parameters of DSSCs. Screen-printed composite CEs consisting of 30 wt% biochar and 20 wt% TTIP reached the best catalytic activity and higher conversion efficiency of DSSCs (6.43 %) than DSSCs with Pt CEs (6.19 %). Based on the results, combining biochar and TTIP offers new possibilities for developing more ecological and low-cost mass-producible materials for CEs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. A comprehensive review of dye-sensitized solar cell optimal fabrication conditions, natural dye selection, and application-based future perspectives10.1007/s11356-021-16976-8 ↗
2. Recent development in two-dimensional material-based advanced photoanodes for high-performance dye-sensitized solar cells10.1016/j.solener.2022.12.013 ↗
3. Review of dye-sensitized solar cell (DSSCs) development
4. Increased power conversion efficiency of dye-sensitized solar cells with counter electrodes based on carbon materials10.1039/C9RA03344K ↗
5. Effect of different counter electrodes on power conversion efficiency of DSSCs10.1007/s11664-022-09973-1 ↗
6. Laser-induced graphitization of a forest-based ink for use in flexible and printed electronics10.1038/s41528-020-0080-2 ↗
7. Lotus leaf derived natural dye as sensitizer and biochar as counter electrode for dye-sensitized solar cells
8. 20 renewable biowastes derived carbon materials as green counter electrodes for dye-sensitized solar cells10.1016/j.matchemphys.2017.10.056 ↗
9. Biocarbon from brewery residues as a counter electrode catalyst in dye solar cells10.1016/j.electacta.2020.137583 ↗
10. Biomass-derived carbon (BC) boosted catalytic properties of zinc tungstate (ZnWO4) hybrid photoanodes for accelerating the triiodide reduction in dye-sensitized solar cells10.1016/j.diamond.2022.108821 ↗
11. Biomass-derived carbon (BC) modified CoWO4 nanoparticles composites for improved performance of dye-sensitized solar cells10.1016/j.cplett.2022.139814 ↗
12. Effect of carbonization temperature on the electrocatalytic property and efficiency of dye-sensitized solar cells derived from corncob and sugarcane leaf agricultural residues10.1007/s13399-021-02204-3 ↗
13. Biomass-derived biochar materials as sustainable energy sources for electrochemical energy storage devices10.1016/j.rser.2020.110464 ↗
14. Biochar as a support for nanocatalysts and other reagents: recent advances and applications10.1016/j.ccr.2020.213585 ↗
15. Activated coconut shell charcoal based counter electrode for dye-sensitized solar cells10.1016/j.orgel.2019.05.009 ↗
16. N.L. Panwar, A. Pawar, Influence of activation conditions on the physicochemical properties of activated biochar: a review, (n.d.). https://doi.org/10.1007/s13399-020-00870-3/(Published).
17. Lyu · 2019
18. Changes in biochar functional groups and its reactivity after volatile-char interactions during biomass pyrolysis10.1021/acs.energyfuels.0c03243 ↗
19. Dual functional application of pomelo peel-derived bio-based carbon with controllable morphologies: an efficient catalyst for triiodide reduction and accelerant for anaerobic digestion10.1016/j.ceramint.2019.10.035 ↗
20. Wood-derived pore-rich carbon: a green catalyst for counter electrodes of dye-sensitized solar cells10.1016/j.mseb.2023.116663 ↗
21. Incorporation of nanostructured carbon composite materials into counter electrodes for highly efficient dye-sensitized solar cells10.1186/s11671-018-2692-1 ↗
22. Toward industrial-scale production of perovskite solar cells: screen printing, slot-die coating, and emerging techniques10.1021/acs.jpclett.8b00912 ↗
23. Electrophoretic deposition of a supercapacitor electrode of activated carbon onto an indium-tin-oxide substrate using ethyl cellulose as a binder10.1016/j.jmst.2020.03.072 ↗
24. The effect of the ink composition on the performance of carbon-based conductive screen printing inks10.1007/s10854-018-0372-7 ↗
25. Scalable screen-printing manufacturing process for graphene oxide platinum free alternative counter electrodes in efficient dye sensitized solar cells10.1016/j.flatc.2019.100105 ↗
26. High efficient carbon coated TiO2electrode for ultra-capacitor applications10.1088/1361-6463/ac2e33 ↗
27. Electrochemical capacitive behaviors of carbon/titania composite prepared by Tween 80-assisted sol-gel process for capacitive deionization10.1016/j.desal.2021.115131 ↗
28. Sol-gel TiO2/carbon paste electrode nanocomposites for electrochemical-assisted sensing of fipronil pesticide10.33961/jecst.2019.00178 ↗
29. Colloidal sol-gel: a powerful low-temperature aqueous synthesis route of nanosized powders and suspensions10.1016/j.oceram.2021.100200 ↗
30. Current status and trends of carbon-based electrodes for fully solution-processed perovskite solar cells10.1016/j.jechem.2021.11.020 ↗
31. Fully printable perovskite solar cells with highly-conductive, low-temperature, perovskite-compatible carbon electrode10.1016/j.carbon.2017.09.008 ↗
32. Enhanced properties of low-cost carbon black-graphite counter electrode in DSSC by incorporating binders10.1016/j.solener.2021.06.070 ↗
33. Biochar - an efficient sorption material for the removal of pharmaceutically active compounds, DNA and RNA fragments from wastewater10.1016/j.jece.2021.105746 ↗
34. Polypyrrole-coated multi-walled carbon nanotubes for the simple preparation of counter electrodes in dye-sensitized solar cells10.1016/j.synthmet.2015.10.020 ↗
35. Facile fabrication of screen-printed MoS2 electrodes for electrochemical sensing of dopamine10.1038/s41598-022-16187-2 ↗
36. Eco-friendly screen printing of silver nanowires for flexible and stretchable electronics10.1039/D2NR05840E ↗
37. Fabrication of Ti3SiC2-based pastes for screen printing on paper-derived Al2O3 substrates10.1016/j.ceramint.2018.01.256 ↗
38. Sol-gel synthesis of 2-dimensional TiO2: self-assembly of Ti-oxoalkoxy-acetate complexes by carboxylate ligand directed condensation10.1039/C9FD00108E ↗
39. Non-hydrolytic sol–gel synthesis of polypropylene/TiO2 composites by reactive extrusion10.1007/s10971-021-05548-4 ↗
40. Nanosized Titania-Nickel mixed oxide for visible light photocatalytic activity10.1016/j.molliq.2020.113328 ↗
41. Fabrication and performance of nitrocellulose nanoparticles reinforced environment-friendly waterborne ethyl cellulose (Surelease®) nanocomposites
42. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
43. Zhang · 2000
44. Choice of precursor not affecting the size of anatase TiO2 nanoparticles but affecting morphology under broader view10.1007/s40089-014-0111-x ↗
45. Effect of titanium (IV) isopropoxide molarity on the crystallinity and photocatalytic activity of titanium dioxide thin film deposited via green sol-gel route10.1016/j.jmrt.2018.10.009 ↗
46. Effect of temperature on the physical, optical and photocatalytic properties of TiO2 nanoparticles10.1007/s42452-020-2544-3 ↗
47. Post-harvest treatment of carbendazim in Chinese chives using TiO2 nanofiber photocatalysis with different anatase/rutile ratios10.1007/s11051-020-04891-x ↗
48. Finite-size and pressure effects on the Raman spectrum of nanocrystalline anatase Ti O210.1103/PhysRevB.71.184302 ↗
49. Tutorial on powder X-ray diffraction for characterizing nanoscale materials10.1021/acsnano.9b05157 ↗
50. Nanocrystalline TiO2/Ti3C2Tx MXene composites with a tunable work function prepared using atmospheric pressure oxygen plasma10.1039/D2NR04465J ↗
51. In situ growth of Co 0.85Se and Ni 0.85Se on conductive substrates as high-performance counter electrodes for dye-sensitized solar cells10.1021/ja303034w ↗
52. Functionalized graphene as a catalytic counter electrode in dye-sensitized solar cells10.1021/nn1016428 ↗
53. Counter electrodes for quantum-dot-sensitized solar cells10.1002/celc.201402405 ↗
54. Synthesis of MoIn2S4@CNTs composite counter electrode for dye-sensitized solar cells10.1186/s11671-020-03410-0 ↗
55. A study of TiO2/carbon black composition as counter electrode materials for dye-sensitized solar cells10.1186/1556-276X-8-227 ↗
56. A low cost mesoporous carbon/SnO 2/TiO 2 nanocomposite counter electrode for dye-sensitized solar cells10.1016/j.jpowsour.2011.10.097 ↗