journal article·2024-08

Modulating oxygen vacancy of ZnO for visible-light driven photocatalytic H2 evolution via facile gas treatment approach

Jin-He Goh, Kar-Woon Tan, Jo-Ey Liow, Poi-Sim Khiew, Wee-Siong Chiu, Choon-Yian Haw

Publisher page

Abstract

Photocatalytic hydrogen production through water splitting is one of the most promising approaches for sustainable and renewable energy source. In recent years, research on defect rich metal oxide semiconductors has increased tremendously. N-type semiconductor ZnO exhibits a wide direct band gap of 3.3eV, limiting the optical absorption at UV range, hindering the photocatalytic performance of pristine ZnO. Furthermore, short charge carriers life time can also decrease the efficiency for hydrogen evolution. In this report, crystal defect engineering via oxygen vacancy tailoring was conducted, narrowing the bandgap of ZnO, while creating interstitial defects that reduces the recombination rate of electrons and holes. ZnO was synthesized via hydrothermal method using zinc acetate dihydrate and sodium hydroxide as precursors before subjecting for conditional annealing for 30, 60, 90 and 120 min for 200 degrees C, 300 degrees C, 400 degrees C and 500 degrees C. A series of characterization techniques were used to authenticate the effects of oxygen vacancy in ZnO. Experimental studies revealed that ZnO annealed at 400 degrees C for 120 min exhibit the highest amount of hydrogen produced through photochemical reactions. Therefore, the degree of oxygen vacancies in ZnO semiconductor can be regulated through diligent control of annealing parameters. Specifically, finding the optimum annealing temperature and duration were the focus in this study that relates to its photocatalytic hydrogen evolution rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · ZnO doping and properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Hydrogen energy systems: a critical review of technologies, applications, trends and challenges10.1016/j.rser.2021.111180 ↗
2. Recent development in band engineering of binary semiconductor materials for solar driven photocatalytic hydrogen production10.1016/j.ijhydene.2020.04.071 ↗
3. Kowalska · 2018
4. Recent developments of zinc oxide based photocatalyst in water treatment technology: a review10.1016/j.watres.2015.09.045 ↗
5. Fundamentals of zinc oxide as a semiconductor10.1088/0034-4885/72/12/126501 ↗
6. A novel ZnO/biochar composite catalysts for visible light degradation of metronidazole10.1016/j.seppur.2022.120633 ↗
7. Oxygen deficient ZnO1-x nanosheets with high visible light photocatalytic activity10.1039/C5NR00271K ↗
8. UV electroluminescence emission from ZnO light-emitting diodes grown by high-temperature radiofrequency sputtering10.1002/adma.200502633 ↗
9. Enhanced photo-carrier transportation at semiconductor/electrolyte interface of TiO2 photoanode by oxygen vacancy engineering10.1016/j.apsusc.2022.153744 ↗
10. Strategies to enhance photocatalytic activity of graphite carbon nitride-based photocatalysts10.1016/j.matdes.2021.110040 ↗
11. Heterojunction photocatalysts10.1002/adma.201601694 ↗
12. Band bending in semiconductors: chemical and physical consequences at surfaces and interfaces10.1021/cr3000626 ↗
13. Atomically Resolved band bending effects in a p-n heterojunction of Cu2O and a Cobalt Macrocycle10.1021/acs.nanolett.7b02486 ↗
14. Interstitial and substitutional light elements in transition metals for heterogeneous catalysis10.1039/D0SC06496C ↗
15. Role of surface oxygen vacancies in zinc oxide/graphitic carbon nitride composite for adjusting energy band structure to promote visible-light-driven photocatalytic activity10.1016/j.apsusc.2021.150106 ↗
16. Yamamoto · 1999
17. Is the band gap of pristine TiO2 narrowed by anion- and cation-doping of titanium dioxide in second-generation photocatalysts?10.1021/jp065659r ↗
18. Oxygen vacancy engineering in photocatalysis10.1002/solr.202000037 ↗
19. Formation, detection, and Function of oxygen vacancy in metal oxides for solar energy conversion
20. Zhang
21. Khan · 2015
22. Fabrication, structural characterization, and photoluminescence of Ga-doped ZnO nanobelts10.1007/s00339-008-4842-2 ↗
23. Photocatalytic activity of ZnO/RGO composite synthesized by one-pot solution combustion method10.1016/j.materresbull.2019.03.024 ↗
24. Physical and electrical performance of vapor-solid grown ZnO straight nanowires10.1007/s11671-008-9218-1 ↗
25. Impact of annealing on the structural and optical properties of ZnO nanoparticles and tracing the formation of clusters via DFT calculation10.1016/j.arabjc.2018.04.006 ↗
26. Analysis of oxygen vacancy in Co-doped ZnO using the electron density distribution obtained using MEM10.1186/s11671-015-0887-2 ↗
27. Microstructural analysis of biowaste-derived hydroxyapatite-chitosan nanocomposites10.1049/mna2.12143 ↗
28. Structural and optical investigations of oxygen defects in zinc oxide nanoparticles10.1063/1.4917664 ↗
29. Role of zinc interstitials and oxygen vacancies of ZnO in photocatalysis: a bottom-up approach to control defect density10.1039/C4NR01887G ↗
30. Role of oxygen vacancy in metal oxide based photoelectrochemical water splitting10.1002/eom2.12075 ↗
31. Understanding the roles of oxygen vacancies in Hematite‐based photoelectrochemical Processes10.1002/ange.201810583 ↗
32. New determination of the fine structure constant from the electron g value and QED10.1103/PhysRevLett.97.030802 ↗
33. An overview of advanced methods for the characterization of oxygen vacancies in materials10.1016/j.trac.2019.05.002 ↗
34. ZnO oxygen vacancies formation and filling followed by in situ photoluminescence and in situ EPR10.1021/jp307693y ↗
35. Synthesis, effect of capping agents, structural, optical and photoluminescence properties of ZnO nanoparticles10.1016/j.jlumin.2009.03.027 ↗
36. Optimization of UV emission intensity of ZnO nanoparticles by changing the excitation wavelength10.1016/j.matlet.2013.02.079 ↗
37. 3D hyperbranched heterostructures of Ag nanocrystals-decorated ZnO nanopillars: controlled growth and characterization of the optical properties10.1039/C7CE01159H ↗
38. Effect of annealing on structural and optical properties of zinc oxide thin film deposited by successive ionic layer adsorption and reaction technique10.1016/j.jallcom.2008.02.061 ↗
39. Counterintuitive sensing mechanism of ZnO nanoparticle based gas sensors10.1016/j.snb.2010.07.009 ↗
40. Lee · 2007
41. Determining the role of oxygen vacancies in the photoelectrocatalytic performance of WO3 for water oxidation10.1039/C9SC06325K ↗
42. Oxygen vacancy engineering in photocatalysis10.1002/solr.202000037 ↗
43. Fully Depleted Ti-Nb-Ta-Zr-O Nanotubes: interfacial charge dynamics and solar hydrogen production10.1021/acsami.8b00727 ↗
44. CdS/CdSe co-sensitized brookite H:TiO2 nanostructures: charge carrier dynamics and photoelectrochemical hydrogen generation10.1016/j.apcatb.2017.11.063 ↗
45. A more accurate, reliable method to evaluate the photoelectrochemical performance of semiconductor electrode without under/over estimation10.1016/j.electacta.2018.02.015 ↗
46. Stable blue TiO2-x nanoparticles for efficient visible light photocatalysts10.1039/c3ta14484d ↗
47. Oxygen vacancy engineering with flame heating approach towards enhanced photoelectrochemical water oxidation on WO3 photoanode10.1016/j.nanoen.2020.105190 ↗