journal article·2025-01Open access

Pioneering computational insights into the structural, magnetic, and thermoelectric properties of A3XN (A=Co, Fe; X=Cu, Zn) anti-perovskites for advanced material applications

Mudasir Younis Sofi, Ashiq Ramzan, Mohd. Shahid Khan, Arvind Kumar, Mudasir Rashid Rather, Shakeel Ahmad Sofi, Saveer Ahmad Khandy, M. Ajmal Khan

Abstract

This study pioneers the utilization of computer-controlled simulations to elucidate the structural, elastic, electronic, and thermoelectric properties of A 3 XN anti-perovskites (A = Co, Fe; X = Cu, Zn). Starting with the development of a detailed structural model, structural optimization calculations identify the stable Pm-3m cubic phase, aligning with experimental findings. Also, these optimizations indicate the ferromagnetic phase stability of A 3 XN anti-perovskites, further supported by positive Curie-Weiss constants of 60 K, 80 K, and 100 K for Co₃CuN, Co₃ZnN, and Fe₃CuN, respectively. The spin-dependent electronic properties, including band structure and density of states, are explored using multiple exchange-correlation ( XC ) functionals—GGA, GGA + U, and GGA + mBJ. The results uphold the metallic nature of the materials, accompanied by significant spin magnetic moments. Specifically, the calculated values of magnetic moments for Co 3 CuN, Co 3 ZnN, and Fe 3 CuN are 5.08 μ B , 3.70 μ B , and 7.61 μ B , respectively. Furthermore, we compute the Curie temperatures for each compound, 942.48 K for Co 3 CuN, 692.7 K for Co 3 ZnN, and 1400.41 K for Fe 3 CuN, which are substantially elevated, indicating robust ferromagnetic behavior that persists well above ambient conditions. Mechanical properties, including stability, deformation behavior, and ductility, are validated through elastic calculations, with various mechanical anisotropy factors examined. From an application perspective, the thermoelectric characteristics of Co 3 CuN, Co 3 ZnN, and Fe 3 CuN are meticulously evaluated, focusing on parameters like the Seebeck coefficient , electrical conductivity , thermal conductivity , power factor and figure of merit (zT). The analysis highlights promising power factor values of 3.0 × 10 11 ( W / c m . K 2 ) , 4.0 × 10 11 ( W / c m . K 2 ) , and 6.0 × 10 11 ( W / c m . K 2 ) for Co 3 CuN, Co 3 ZnN, and Fe 3 CuN, respectively, suggesting potential for enhanced efficiency in thermopower generation, particularly in waste heat recovery applications. Furthermore, the study provides a comprehensive analysis of the ground-state optical properties of A 3 XN, including the dielectric constant , photoconductivity , reflectivity , refractive index , absorption coefficient, and extinction coefficient . The reflectivity spectra demonstrate high reflectivity of 45 % across visible and ultravioletregions, suggesting suitability for applications in coatings designed to mitigate solar heating effects.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thermal Expansion and Ionic Conductivity · Heusler alloys: electronic and magnetic properties · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Metal-rich ternary perovskite nitrides10.1002/ejic.201900756 ↗
2. Electrochemical bulk synthesis of ternary nitride perovskites: Co3InN and Ni3InN10.1002/ejic.201900013 ↗
3. Elastic properties and electronic structures of antiperovskite-type InNCo3 and InNNi310.1016/j.ssc.2010.07.047 ↗
4. Preparation and properties of antiperovskite-type nitrides: InNNi3 and InNCo310.1016/j.jssc.2009.10.002 ↗
5. Epitaxial antiperovskite/perovskite heterostructures for materials design10.1126/sciadv.aba4017 ↗
6. Synthesis and physical properties of antiperovskite CuNFe3 thin films via solution processing for room temperature soft-magnets10.3390/coatings10030270 ↗
7. Anti-perovskite carbides and nitrides A3BX: a new family of damage tolerant ceramics10.1016/j.jmst.2019.08.043 ↗
8. Dynamical stability, vibrational, and optical properties of anti-perovskite A3BX (Ti3TlN, Ni3SnN, and Co3AlC) phases: a first principles study10.1063/5.0022376 ↗
9. Predicted nitrides with an antiperovskite structure10.1023/B:JORY.0000029831.93738.b1 ↗
10. Giant negative thermal expansion in Ge-doped anti-perovskite manganese nitrides10.1063/1.2147726 ↗
11. The Ternary Nitrides InxFe4-xN (0 ≤ x ≤ 0.8): Synthesis, Magnetic Properties, and Theoretical Considerations. Zeitschrift fur Anorg. und Allg
12. Local ordering and magnetism in Ga0.9Fe3.1N10.1016/j.jssc.2011.06.031 ↗
13. High-throughput screening of magnetic antiperovskites10.1021/acs.chemmater.8b01618 ↗
14. Predicting new ferromagnetic nitrides from electronic structure theory: IrFe3N and RhFe3N10.1002/anie.200462247 ↗
15. Itinerant ferromagnet RhFe3N: advanced synthesis and 57 Fe mössbauer analysis10.1021/cm803004v ↗
16. Self-assembled c-axis oriented antiperovskite soft-magnetic CuNCo3 thin films by chemical solution deposition10.1039/C5TC00349K ↗
17. Cobalt–zinc nitride on nitrogen doped carbon black nanohybrids as a non-noble metal electrocatalyst for oxygen reduction reaction10.1039/C7NR02264F ↗
18. Synthesis and physical properties of antiperovskite CuNFe3 thin films via solution processing for room temperature soft-magnets10.3390/coatings10030270 ↗
19. Towards anti-perovskite nitrides as potential nitrogen storage materials for chemical looping ammonia production: reduction of Co3ZnN, Ni3ZnN, Co3InN and Ni3InN under hydrogen10.1016/j.cattod.2020.03.022 ↗
20. Blaha · 2019
21. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
22. The DFT+ U: approaches, accuracy, and applications
23. Improving the modified Becke-Johnson exchange potential10.1103/PhysRevB.85.155109 ↗
24. Charpin · 2001
26. Gibbs2: a new version of the quasi-harmonic model code. II10.1016/j.cpc.2011.05.009 ↗
27. Scrutinized the inherent spin half-metallicity and thermoelectric response of f-electron-based RbMO3 (M = Np, Pu) perovskites: a computational assessment10.1038/s41598-022-22633-y ↗
28. Born, M. On the stability of crystal lattices. I. Math. Proc. Cambridge Philos. Soc. 36, 160.10.1017/S0305004100017138 ↗
29. Investigation of Ba2LnRuO6 (Ln= Nd, Er) for spin-optoelectronic and thermoelectric devices10.1016/j.jmmm.2022.169657 ↗
30. Voigt · 1928
31. Berechnung Der Fließgrenze von Mischkristallen Auf Grund Der Plastizitätsbedingung Für Einkristalle10.1002/zamm.19290090104 ↗
32. Te elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
33. Structural, thermal, elastic, electronic and magnetic properties of cubic lanthanide-based perovskites type oxides PrXO3 (X = V, Cr, Mn, Fe): insights from ab initio study10.1007/s42452-020-2223-4 ↗
34. Unlocking the role of 3d electrons on ferromagnetism and spin-dependent transport properties in K2GeNiX6 (X= Br, I) for spintronics and thermoelectric applications10.1016/j.jpcs.2024.112022 ↗
35. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
36. Frantsevich · 1982
37. Control of spin on ferromagnetism and thermoelectric properties of K2GeMnX6 (X= Cl, Br, I) halide perovskites: emerging candidates for semiconductor spintronics and thermoelectric applications10.1039/D3MA01160G ↗
38. Computational alchemy: the search for new superhard materials10.1557/S0883769400031420 ↗
39. Microscopic theory of hardness and design of novel superhard crystals10.1016/j.ijrmhm.2012.02.021 ↗
40. Modeling hardness of polycrystalline materials and bulk metallic glasses10.1016/j.intermet.2011.03.026 ↗
41. Elasticity and anelasticity of metals10.1038/164084b0 ↗
42. The elastic anisotropy of crystals10.1063/1.1709819 ↗
43. Universal elastic anisotropy index10.1103/PhysRevLett.101.055504 ↗
44. Elastic anisotropy of crystals10.1063/1.4962996 ↗
45. Negative Poisson's ratios as a common feature of cubic metals10.1038/32842 ↗
46. Tailoring the magneto-electronic and optical properties of cobalt doped strontium titanate by first-principles calculations10.1016/j.physb.2023.415025 ↗
47. DFT insight into magnetoelectronic and optical properties of Mo-modified BaTiO310.1016/j.physb.2023.415163 ↗
48. Modulated magnetic, electronic, and optical properties of vanadium‐doped LaAlO3: a first‐principles study10.1002/pssb.202300206 ↗
49. Possible half-metallic ferromagnetism in rare-earth metals based ruthenate double perovskites: Ba2RERuO6 (RE= Dy, Tm)10.1002/pssb.202200569 ↗
50. Optical and magnetic characteristics of BaTi1-xCoxO3: a first-principles study10.15251/CL.2023.207.459 ↗
51. Investigation on the physical properties of Ni doped SrTiO3 by first-principles calculations10.15251/JOR.2023.195.513 ↗
52. GIBBS: isothermal-isobaric thermodynamics of solids from energy curves using a quasi-harmonic Debye model10.1016/j.comphy.2003.12.001 ↗
53. Calculation of Debye temperature for crystalline structures case study on Ti, Zr, and Hf10.1016/S1359-6454(01)00002-7 ↗
54. An introduction to thermal physics10.1119/1.19116 ↗
55. Zur Theorie der spezifischen Warmen10.1002/andp.19123441404 ↗
56. Exploring the lead-free halide Cs2MGaBr6 (M = Li, Na) double perovskites for sustainable energy applications10.1038/s41598-024-54386-1 ↗
57. Dynamic and thermodynamic properties of antiperovskite compound BiNCa310.1007/s12034-021-02374-w ↗
58. Theoretical insight on the electronic band structure, mechanical, vibrational and thermodynamic characteristic of antiperovskites RE3InN (RE= Y and La)
59. Study on the measurement of specific heat of solids
60. Novel thermoelectric material Ba2AlNbO6 for energy harvesting applications
61. Investigation of transport properties of some superconductor nickel-based antiperovskite XNNi3 (X= Mg, Al, Cu, Zn, Ga, Ag, Cd, in, Sn, Sb, Pt and Pb)10.1007/s10948-018-4647-2 ↗
62. Investigation of AcXO3 (X= Al, Ga) perovskites for energy harvesting applications: a DFT approach
63. DFT study of optoelectronic and thermoelectric properties of cubic Ba2ZrMO6 (M= Ce, Ti) double perovskites10.1016/j.jssc.2022.123419 ↗
64. An ab initio study on the mechanical stability, spin-dependent electronic properties, molecular orbital predictions, and optical features of antiperovskite A3InN (A= Co, Ni)10.1021/acsomega.1c07039 ↗
65. High throughput combinatorial method for fast and robust prediction of lattice thermal conductivity10.1016/j.scriptamat.2016.09.034 ↗
66. Eco-friendly lead-free halide double perovskites A2CuMCl6 (A= K, Rb; M= Sb, Bi): stability, thermoelectric, and optoelectronic advancements through theoretical insights10.1039/D4TC00891J ↗