On the conversion of amorphous In2S3 thin films to polycrystalline In2S3 and to In2O3 through thermal oxidation process
Source abstract
Abstract
Abstract Indium sulfide (In2S3) and Indium oxide (In2O3) are promising n-type semiconductors that have been used in optoelectronic applications owing to their unique optical and electrical properties. In this work, amorphous In2S3 thin films were grown by co-evaporation technique. The as-deposited films are subjected to air annealing process in the temperature range of 300–550 °C. In2O3 thin films were obtained through the oxidation process of the as-prepared In2S3 thin films. X-ray diffraction patterns reveal that as-deposited films are amorphous in nature and are systematically converted into polycrystalline In2S3 and then to In2O3. The energy dispersive X-ray spectroscopy results also confirm the transformation of In2S3 films into In2O3. The obtained direct energy band gap of In2S3 films is in the range of 2.47–2.85 eV and the direct energy band gap of In2O3 film found to be 3.48 eV. The resistivity of as-deposited film is 2.04 × 102 Ωcm and it decreases to 8.17 × 10-2 Ωcm for the films annealed at 550 °C. The obtained results show that the In2S3 and In2O3 thin films could be a right choice for buffer layer and transparent conducting oxide layer respectively for thin film solar cell applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Fabrication and characterization of indium sulfide thin films deposited on SAMs modified substrates surfaces by chemical bath deposition10.1016/j.apsusc.2011.07.036 ↗
2. Effect of annealing on the physical properties of thermally evaporated In2S3 thin films10.1016/j.cap.2018.11.016 ↗
3. Stoichiometry and local bond configuration of In2S3:Cl thin films by Rutherford backscattering spectrometry10.1016/j.nimb.2016.09.005 ↗
4. Effect of substrate temperature on structural and optical properties of In2S3 thin films grown by thermal evaporation10.1016/j.matpr.2017.10.049 ↗
5. Effect of film thickness on physical properties of RF sputtered In2S3 layers10.1016/j.surfcoat.2015.06.011 ↗
6. Effect of deposition runs on the physical properties of In2S3 chemically synthesized for photocatalytic application10.1016/j.rinp.2018.02.078 ↗
7. Ethanol sensing properties of sprayed β -In2S3 thin films10.1016/j.snb.2018.01.175 ↗
8. Investigation of Cu(In,Ga)Se2/In2S3 diffuse interface by Raman scattering10.1016/j.tsf.2010.12.089 ↗
9. Electro deposited In2S3 buffer layers for CuInS2 solar cells10.1016/j.solmat.2008.04.022 ↗
10. Annealing effect on the physical properties of evaporated In2S3 films10.1016/j.solmat.2010.02.044 ↗
11. Properties of In2O3 films obtained by thermal oxidation of sprayed In2S310.1016/j.mssp.2013.04.021 ↗
12. Structural, optical, morphological and electrical properties of indium oxide thin films prepared by sol gel spin coating process10.1016/j.surfin.2018.12.012 ↗
13. Effect of gamma-irradiation on optical, structural and electrical properties of In2O3: F thin films for photocatalysis application10.1016/j.optlastec.2018.11.010 ↗
14. Physical properties enhancement of porous silicon treated with In2O3 as a antireflective coating10.1016/j.rinp.2019.01.076 ↗
15. Facile synthesis of Pr-doped In2O3 nanoparticles and their high gas sensing performance for ethanol10.1016/j.snb.2019.127377 ↗
16. Facile preparation of hierarchical Sb-doped In2O3 microstructures for acetone detection10.1016/j.snb.2018.05.046 ↗
17. Effect of humidity on optical and electrical properties of Zr-doped In2O3 and a new structure for transparent electrode of silicon heterojunction solar cell10.1016/j.solener.2019.12.017 ↗
18. Enhanced performance of TiO2-based planar perovskite solar cells by In2O3 interfacial modification layer10.1016/j.orgel.2019.105426 ↗
19. Hybrid optoelectronic synaptic functionality realized with ion gel-modulated In2O3 phototransistors
20. In2O3 nanocapsules for rapid photodegradation of crystal violet dye under sunlight10.1016/j.jcis.2019.10.101 ↗
21. Platinum doping effect on In2O3 MSM IR photodetectors10.1016/j.spmi.2018.05.035 ↗
22. Effect of iron doping on structural, optical and electrical properties of sprayed In2O3 thin films10.1016/j.spmi.2015.01.015 ↗
23. Structural characterization of sputtered indium oxide films deposited at room temperature10.1016/j.tsf.2009.12.018 ↗
24. Differences between amorphous indium oxide thin films10.1016/j.pnsc.2013.08.004 ↗
25. ZnO-enhanced In2O3 -based sensors for n-butanol gas10.1016/j.ceramint.2018.12.182 ↗
26. Synthesis and visible light photo-electrochemical behaviors of In2O3-sensitized ZnO nanowire array film10.1016/j.jphotochem.2011.02.002 ↗
27. Facile routes to In2S3 and In2O3 hierarchical nanostructures10.1016/j.matchemphys.2009.07.047 ↗
28. Improved indium oxide transparent conductive thin films by hydrogen annealing10.1016/j.matlet.2017.04.151 ↗
29. Degenerate and non-degenerate In2O3 thin films by pulsed electron beam deposition10.1016/j.mssp.2018.07.024 ↗
30. Epitaxial growth and characterization of high quality In2O3 films on a-plane sapphire substrates by MOCVD10.1016/j.vacuum.2019.05.035 ↗
31. Structural and optical properties of nanocrystal In2O3 films by thermal oxidation of In2S3 films10.1088/0256-307X/23/6/070 ↗
32. Growth studies and characterization of In2S3 films prepared by hydrothermal method and their conversion to In2O3 films10.1016/j.matchemphys.2011.08.014 ↗
33. In2O3 films prepared by thermal oxidation of amorphous InSe thin films10.1016/j.tsf.2011.10.015 ↗
34. Fabrication of visible light photodetector using co-evaporated Indium Sulfide thin films10.1007/s10854-019-02152-9 ↗
35. Indium sulfide based metal-semiconductor-metal ultraviolet-visible photodetector
36. Effect of precursor concentration on physical properties of nebulized spray deposited In2S3 thin films10.1016/j.jascer.2016.07.002 ↗
37. Thermal annealing of SnS thin film induced mixed tin sulfide oxides-Sn2S3 for gas sensing: optical and electrical properties10.1016/j.mssp.2017.11.034 ↗
38. Modification of the optoelectronic properties of sprayed In2S3 thin films by indium diffusion for application as buffer layer in CZTS based solar cell10.1016/j.jallcom.2012.11.106 ↗
39. Effects of rapid thermal annealing on the properties of In2O3 thin films grown on glass substrate by rf reactive magnetron sputtering10.1016/j.mee.2011.03.147 ↗
40. Enhanced luminescence property of 1 D nanorods realised by aqueous chemical growth on indium doped zinc oxide thin films10.1016/j.tsf.2019.04.054 ↗
41. Effect of thermal annealing on physical properties of vacuum evaporated In2S3 buffer layer for eco-friendly photovoltaic applications10.1016/j.mssp.2015.06.049 ↗
42. Structural, optical and methanol sensing properties of sprayed In2O3 nanoparticle thin films10.1016/j.ceramint.2012.01.075 ↗
43. Properties of Au incorporated In2O3 films10.1016/j.mssp.2018.12.029 ↗
44. Characterization of prepared In2O3 thin films: the FT-IR, FT-Raman, UV-Visible investigation and optical analysis10.1016/j.saa.2015.02.033 ↗
45. Structural, morphological, optical, and electrical properties of In2O3 nanostructured thin films10.1016/j.ijleo.2016.05.035 ↗
46. Formation of nanostructure on the surface of layered InSe semiconductor caused by oxidation under heating10.1134/S106378340708029X ↗
47. Effect of post annealing on the characteristics of In2S3 buffer layer grown by chemical bath deposition on a CIGS substrate10.1016/j.cap.2015.08.019 ↗
48. Effect of substrate temperature on the physical properties of co-evaporated Sn2S3 thin films10.1016/j.ceramint.2016.04.172 ↗
49. Effect of Annealing on the optical properties and photoconductivity of SnS thin film10.1063/1.4980503 ↗
50. The effect of in-situ and post deposition annealing towards the structural optimization studies of RF sputtered SnS and Sn2S3 thin films for solar cell application10.1016/j.solener.2019.07.059 ↗
51. Effect of thermal annealing on nebulizer spray deposited tin sulfide thin films and their application in a transparent oxide/CdS/SnS heterostructure10.1016/j.tsf.2018.09.014 ↗
52. Optical properties of thermally evaporated In2S3 thin films measured using photoacoustic spectroscopy10.1016/j.mssp.2017.09.009 ↗
53. Low temperature pulsed direct current magnetron sputtering technique for single phase β-In2S3 buffer layers for solar cell applications10.1016/j.apsusc.2017.01.147 ↗
54. Effect of annealing on the physical properties of thermally evaporated In2S3 thin films10.1016/j.cap.2018.11.016 ↗
55. Study of low temperature elaborated tailored optical band gap β-In2S3-3xO3x thin films10.1016/S0022-0248(01)02040-1 ↗
56. Effect of sputtering power on structural and optical properties of radio frequency-sputtered In2S3 thin films10.1166/jnn.2014.10079 ↗
57. Tailoring growth conditions for modulated flux deposition of In2S3 thin films
58. Effect of nitrogen annealing on the structural, optical and photoluminescence properties of In2O3 thin films10.1016/j.jallcom.2016.03.115 ↗
59. Effect of substrate temperature on the growth of ITO thin films10.1016/j.apsusc.2005.02.115 ↗
60. Study on the physical properties of europium doped indium oxide thin films10.1016/j.mssp.2016.07.013 ↗
61. Pierret · 1996
62. Copper antimony sulfide thin films for visible to near infrared photodetector applications10.1039/C8RA05662E ↗
63. Effect of air annealing on the optical electrical and structural properties of In2S3 films10.1007/s11431-008-0074-0 ↗
64. Annealing of indium sulfide thin films prepared at low temperature by modulated flux deposition10.1088/0268-1242/28/1/015004 ↗
65. Sol-gel growth and characterization of In2O3 thin films10.1016/j.tsf.2017.10.049 ↗