Machined quality prediction and optimization for micro-EDM drilling of semi-conductive SiC wafer
Source abstract
Abstract
Semi-conductive SiC (semi-SiC) wafer is the third generation of semiconductor materials. However, its high hardness and brittleness make it extremely difficult to machine 3-dimensional complex shapes by conventional machining methods. Electric discharge machining (EDM) is potentially an alternative method for machining semi-SiC wafer. In this study, micro-hole drilling by EDM on semi-SiC wafer was investigated using an assisting electrode technique. A deep neural network (DNN) model was developed for predicting the machined quality. The adjustable machining parameters considered were pulse-on time, pulse-off time, peak current, and working time. The machined quality indices included the inlet and outlet diameters of the EDMed hole. The importance and effects of machining parameters on the machined quality were analyzed using Random Forest Method and Response Surface Method, respectively. Particle Swarm Optimization (PSO) algorithm was employed to find the optimal DNN architecture. The developed DNN model was effective in predicting machined quality, as demonstrated by low mean absolute percentage error (MAPE), low mean squared error (MSE), low root mean squared error (RMSE), and high coefficient of determination (R 2) in the training and testing processes. The developed DNN model coupled with the PSO was used to find the optimal machining parameters for generating the best combination of machined quality. Further validation experiments were conducted and the results verified that the DNN model and PSO were capable of predicting and optimizing the machined quality for EDM of semi-SiC wafer.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Mordor Intelligence · 2023
2. Business Insights · 2022 · 2022
3. Silicon carbide electronic devices
4. Hetero- and homo-epitaxial growth of 3C-SiC for MOS-FETs10.1016/j.mee.2005.10.046 ↗
5. Fabrication and testing of surface micromachined silicon carbide micromotors
6. High-temperature single-crystal 3C-SiC capacitive pressure sensor10.1109/JSEN.2004.830301 ↗
7. Operation of α(6H)-SiC pressure sensor at 500°C
8. Exploring the nonlinear piezoresistive effect of 4H-SiC and developing MEMS pressure sensors for extreme environments10.1038/s41378-023-00496-1 ↗
9. Harsh environment materials
10. The fabrication of suspended micromechanical structures from bulk 6H-SiC using an ICP-RIE system10.1088/0960-1317/16/4/011 ↗
11. Etching of silicon carbide for device fabrication and through via-hole formation10.1007/s11664-001-0018-y ↗
12. A comprehensive review of electric discharge machining of advanced ceramics10.1016/j.ceramint.2020.05.207 ↗
13. EDM-future steps towards the machining of ceramics10.1016/S0007-8506(07)60759-8 ↗
14. Electrical discharge machining phenomena of insulating sialon ceramics with an assisting electrode10.2526/ijem.2.25 ↗
15. Assisting electrode method for machining insulating ceramics10.1016/S0007-8506(07)63047-9 ↗
16. Past and current trends in electric discharge based machining of silicon carbide10.1016/j.matpr.2019.12.135 ↗
17. Micro-electro discharge machining of non-conductive zirconia ceramic: investigation of MRR and recast layer hardness10.1007/s00170-014-6124-9 ↗
18. Layer generation process on work-piece in electrical discharge machining10.1016/S0007-8506(07)60554-X ↗
19. A new machining method for insulating ceramics with an electrical discharge phenomenon10.2109/jcersj.103.1000 ↗
20. Characterisation of high aspect ratio non-conductive ceramic microstructures made by spark erosion10.1007/s00542-011-1284-0 ↗
21. Electro-discharge machining of ceramics: a review10.3390/mi10010010 ↗
22. Effect of conductive coatings on micro-electro-discharge machinability of aluminum nitride ceramic using on-machine-fabricated microelectrodes10.3390/ma12203316 ↗
23. Parametric analysis of μ-electric discharge machining of non-conductive Si3N410.4028/www.scientific.net/AMM.564.560 ↗
24. Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic10.1016/j.proeng.2013.03.180 ↗
25. Study on single-discharge machining characteristics of non-conductive engineering ceramics in emulsion with high open voltage and large capacitor10.1177/0954405411404630 ↗
26. Material removal by spalling during EDM of ceramics10.1016/S0955-2219(00)00027-3 ↗
27. Study on the electro-discharge machining of a hot pressed aluminum oxide based ceramic10.1016/S0924-0136(96)00012-X ↗
28. An overview of electric discharge machining of ceramics and ceramic based composites10.1016/j.jmapro.2016.12.010 ↗
29. Three-dimensional machining of insulating ceramics materials with electrical discharge machining10.1016/S1003-6326(10)60263-4 ↗
30. Major parameters affecting the electric discharge machining of non-conductive SiC
31. Electrical discharge machined surface of the insulating ZrO2 ceramics10.1299/jamdsm.5.372 ↗
32. Kerosene supply effect on performance of aluminum nitride micro-electrical discharge machining10.1007/s12541-021-00568-0 ↗
33. Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication10.1177/09544062221126357 ↗
34. Fault measurement in composite structure by fuzzy-neuro hybrid technique from the natural frequency and fibre orientation
35. Dynamic investigation of FRP cracked beam using neural network technique10.1007/s42417-019-00158-5 ↗
36. Multi-objective parametric optimization during micro-EDM drilling of Ti-6Al-4V using teaching learning based optimization algorithm10.1016/j.matpr.2022.03.257 ↗
37. Modelling of micro-electrodischarge machining during machining of titanium alloy Ti-6Al-4V using response surface methodology and artificial neural network algorithm10.1243/09544054JEM1343 ↗
38. A hybrid model using supporting vector machine and multi-objective genetic algorithm for processing parameters optimization in micro-EDM10.1007/s00170-010-2623-5 ↗
39. ANN modelling and elitist teaching learning approach for multi-objective optimization of μ-EDM10.1007/s10845-016-1193-2 ↗
40. Optimization of material removal rate in micro-EDM using artificial neural network and genetic algorithms10.1080/10426910903365760 ↗
41. Prediction and optimization of geometrical quality for pulsed laser cutting of non-oriented electrical steel sheet10.1016/j.optlastec.2022.107847 ↗
42. Parameter optimization of modern machining processes using teaching-learning-based optimization algorithm10.1016/j.engappai.2012.06.007 ↗
43. Modelling and optimization of process parameters of wire electrical discharge machining10.1243/09544054JEM1559 ↗
44. Application of ant colony optimization algorithm in process planning optimization10.1007/s10845-010-0407-2 ↗
45. Forward and backward predictions of the friction stir welding parameters using fuzzy-artificial bee colony-imperialist competitive algorithm systems10.1007/s10845-013-0784-4 ↗
46. Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process
47. Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM
48. Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication
49. Circle fitting by linear and nonlinear least squares10.1007/BF00939613 ↗
50. Particle swarm optimization algorithm and its applications: a systematic review10.1007/s11831-021-09694-4 ↗
51. Separating the wheat from the chaff: on feature selection and feature importance in regression random forests and symbolic regression
52. EDM technology and strategy development for the manufacturing of complex parts in SiSiC10.1016/j.jmatprotec.2009.11.012 ↗
53. Optimization of electrodischarge machining parameters on ZrO2 ceramic using the Taguchi method10.1243/09544054JEM1437 ↗
54. Microstructural characterization of thermal damage on silicon wafers sliced using wire-electrical discharge machining10.1115/1.4039647 ↗
55. Single discharge machining insulating Al2O3 ceramic with high instantaneous pulse energy in kerosene10.1080/10426914.2011.602783 ↗
56. Removal amount difference between anode and cathode in EDM process10.2526/ijem.1.45 ↗
57. EDM mechanism of single crystal SiC with respect to thermal, mechanical and chemical aspects10.1016/j.jmatprotec.2016.05.010 ↗
58. Electrode jump motion in linear motor equipped die-sinking EDM10.1115/1.1615793 ↗
59. Efficiency improvement in electrical discharge machining (EDM) of constant section cavity based on experimental study and numerical calculations10.1007/s11740-018-0835-y ↗
60. Investigation of material removal mechanisms in EDM of composite ceramic materials10.1016/j.jmatprotec.2004.02.013 ↗
61. Géron · 2019
62. Using deep neural network with small dataset to predict material defects10.1016/j.matdes.2018.11.060 ↗
63. Prediction and optimization of dross formation in laser cutting of electrical steel sheet in different environments10.1016/j.jmrt.2022.03.106 ↗
64. Effects of hidden layers on the efficiency of neural networks
65. Optimizing deep feedforward neural network architecture: a tabu search based approach10.1007/s11063-020-10234-7 ↗
66. Optimizing number of hidden neurons in neural networks
67. A comparative study of linear, random forest and AdaBoost regressions for modeling non-traditional machining10.3390/pr9112015 ↗
68. Vipin, Prediction of material removal rate and surface roughness in CNC turning of delrin using various regression techniques and neural networks and optimization of parameters using genetic algorithm