journal article·2022-12

Recent advances and future developments in PVA brush scrubbing cleaning: A review

Shihao Zhang, Fangyuan Wang, Baimei Tan, Wei Li, Baohong Gao, Yangang He

Publisher page

Abstract

As semiconductor integrated circuits (SICs) have been developed to scale down to obtain higher integration and better performance, more chemical mechanical polishing (CMP) steps make post-CMP cleaning more challenging. Polyvinyl alcohol (PVA) brush scrubbing dominates the post-CMP cleaning process due to its flexibility, single wafer processing, and low cost of ownership (COO). For recent two decades, researchers have been continuously attempting to improve the cleaning performance of PVA brush scrubbing to meet increasingly challenging requirements of post-CMP cleaning, and an enormous quantity of literature is available. This paper aims to review and discuss the current status of PVA brush scrubbing, comment on current challenges, and forecast the future development trend based on the overall observation, thereby providing a deeper understanding of this technology for both academics and practicing engineers. Initially, we compendiously summarize the source of contamination and mechanisms of particle adhesion and removal. The research status of PVA brush scrubbing is then outlined and analyzed in terms of both mechanical and chemical influencing factors from the cleaning process and cleaning targets. Finally, we discuss the existing challenges of PVA brush scrubbing in integrating other cleaning methods and possible future development with emerging potential analytical technologies.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Study on the effect of ceria concentration on the silicon oxide removal rate in chemical mechanical planarization
2. Ultrasound-induced break-in method for an incoming polyvinyl acetal (PVA) brush used during post-CMP cleaning process
3. Characterization of post-copper CMP surfaces with scanning probe microscopy10.1016/j.apsusc.2005.09.018 ↗
4. Characterization of post-copper CMP surface with scanning probe microscopy: Part II: surface potential measurements with scanning Kelvin probe force microscopy10.1016/j.mee.2006.10.035 ↗
5. Review on copper chemical–mechanical polishing (CMP) and post-CMP cleaning in ultra large system integrated (ULSI)—an electrochemical perspective10.1016/j.electacta.2006.07.039 ↗
6. Advanced finishing processes
7. A brief review of the cleaning process for electronic device fabrication
8. Effect of capping layer and post-CMP surface treatments on adhesion between damascene Cu and capping layer for ULSI interconnects10.1016/j.mee.2007.11.006 ↗
9. Aqueous cleaning and surface conditioning processes
10. Optimization of the physical cleaning condition for nanotechnology10.1016/j.cirp.2011.03.070 ↗
11. Brush scrubbing for post-CMP cleaning
12. Comparing the effectiveness of knobby and ridged post-CMP cleaning brushes
13. Moumen · 1999 · 250
14. Cleaning status on low-k dielectric in advanced VLSI interconnect:: characterisation and principal issues10.1016/S0167-9317(01)00548-2 ↗
15. Effect of capillary condensation on friction force and adhesion10.1021/la060456f ↗
16. Post cleaning for FEOL CMP with silica and ceria slurries10.1149/2.0101710jss ↗
17. A modified multi-chemicals spray cleaning process for post-CMP cleaning application10.1016/S0254-0584(98)80001-1 ↗
18. A modified multi-chemical spray cleaning process for post shallow trench isolation chemical mechanical polishing cleaning application10.1016/S0040-6090(98)01207-3 ↗
19. Post copper CMP hybrid clean process for advanced BEOL technology10.1109/TSM.2013.2273124 ↗
20. Direct and quantitative study of ceria–SiO2 interaction depending on Ce3+ concentration for chemical mechanical planarization (CMP) cleaning10.1016/j.mssp.2020.105500 ↗
21. Investigation of the barrier slurry with better defect performance and facilitating post-CMP cleaning10.1016/j.mee.2016.12.002 ↗
22. Investigation of cu-BTA complex formation during Cu chemical mechanical planarization process10.1016/j.apsusc.2016.05.106 ↗
23. Investigation into the effect of CMP slurry chemicals on ceria abrasive oxidation state using XPS10.1149/2.0311910jss ↗
24. Particles detection and analysis of hard disk substrate after cleaning of post chemical mechanical polishing10.1016/j.apsusc.2009.06.120 ↗
25. Post Cu CMP cleaning of polyurethane pad debris10.1149/2.006401jss ↗
26. Post-CMP cleaning
27. Influence of post-CMP cleaning on Cu interconnects and TDDB reliability10.1109/TED.2005.846316 ↗
28. Megasonic cleaning
29. Theory of adhesion of small particles10.1063/1.1707996 ↗
30. Particle adhesion and removal: a review10.1080/02726359508906677 ↗
31. The adhesion-induced deformation and the removal of submicrometer particles10.1163/156856194X00654 ↗
32. Mittal · 1988
33. Effect of contact deformations on the adhesion of particles10.1016/0079-6816(94)90044-2 ↗
34. Mechanisms for nano particle removal in brush scrubber cleaning10.1016/j.apsusc.2010.10.115 ↗
35. Fundamental study of the removal mechanisms of nano-sized particles using brush scrubber cleaning
36. Assessment of post-CMP cleaning mechanisms using statistically-designed experiments10.1016/S0040-6090(98)01038-4 ↗
37. Surface cleaning mechanisms and future cleaning requirements
38. Particle adhesion and removal mechanisms in post-CMP cleaning processes10.1109/TSM.2002.804872 ↗
39. Comparison of interfacial forces during post-chemical-mechanical-polishing cleaning10.1115/1.2908896 ↗
40. A lubrication model between the soft porous brush and rigid flat substrate for post-CMP cleaning10.1016/j.mee.2011.02.113 ↗
41. A kinematic model describing particle movement near a surface as effected by Brownian motion and electrostatic and Van der Waals forces10.1007/s11431-014-5688-9 ↗
42. On particle adhesion and removal mechanisms in turbulent flows10.1163/156856194X00799 ↗
43. Particle adhesion and removal in chemical mechanical polishing and post‐CMP cleaning10.1149/1.1391989 ↗
44. Submicron particle removal in post-oxide chemical–mechanical planarization (CMP) cleaning10.1007/s003390051028 ↗
45. A sphere in contact with a plane wall in a slow linear shear flow10.1016/0009-2509(68)89039-6 ↗
46. Modeling of particle removal processes in brush scrubber cleaning10.1016/j.wear.2011.06.022 ↗
47. Probing particle removal in brush scrubber cleaning with fluorescence technique10.1007/s11431-013-5396-x ↗
48. Ludema · 2018
49. Particle adhesion and removal mechanisms during brush scrubber cleaning10.1116/1.1815319 ↗
50. Effect of mechanical properties of PVA brush rollers on frictional forces during post-CMP scrubbing10.1149/1.1782092 ↗
51. Philipossian · 2003 · 767
52. Evaluation of post-Cu CMP cleaning of organic residues using microfluidic device10.1016/j.elecom.2008.02.005 ↗
53. Frictional analysis of various poly(vinyl alcohol) brush roller designs for post-interlevel dielectric CMP scrubbing applications10.1149/1.3058994 ↗
54. A study of post-etch wet clean on electrical and reliability performance of Cu/low k interconnections10.1016/j.microrel.2004.07.007 ↗
55. Tribological attributes of post-CMP brush scrubbing10.1149/1.1753586 ↗
56. Method for determining the lubrication mechanism of post-ILD CMP brush scrubbing10.1149/1.2929065 ↗
57. Reduction of scratch on brush scrubbing in post CMP cleaning by analyzing contact kinetics on ultra low-k dielectric10.1149/1.3123779 ↗
58. Tribological effects of brush scrubbing in post chemical mechanical planarization cleaning on electrical characteristics in novel non-porous low-kDielectric fluorocarbon on Cu interconnects10.1143/JJAP.50.05EC07 ↗
59. Friction force monitoring system in post-CMP cleaning for correlations with process issues
60. Normal force and behavior of containing water during the compression of PVA brush
61. Effect of viscoelasticity of PVA brush on friction during post-CMP cleaning: a guideline for nodule configuration
62. Brush deformation effects on poly vinyl acetal brush scrubbing10.1149/2.0191804jss ↗
63. Investigation of eccentric PVA brush behaviors in post-Cu CMP cleaning10.1016/j.mee.2012.07.107 ↗
64. Effect of process parameters on particle removal efficiency in poly(vinyl alcohol) brush scrubber cleaning10.1143/JJAP.51.026501 ↗
65. Making PVF porous sponge with and without using the pore-forming agent—a comparison10.1016/j.jtice.2016.10.025 ↗
66. A novel method of making PVF porous sponge without using the pore making agent10.1002/app.41270 ↗
67. A new method of preparing superabsorbent PVF porous foam through the simultaneous acidification of water glass solution–Aspect of environmental protection10.1002/app.39894 ↗
68. The reinforcement of the physical strength of PVA sponge through the double acetalization10.1016/j.seppur.2017.01.017 ↗
69. Post-CMP clean PVA brush design advancements and characterization in Cu/Low-k applications
70. PVA brush technology for next generation post-CMP cleaning applications10.1149/1.3489057 ↗
71. Chapter 7 post-CMP clean
72. Particle generation on hydrogen-terminated Si surface by brush scrubbing of polyvinyl alcohol10.1149/2.041111jes ↗
73. Study of the cross contamination effect on post CMP in situ cleaning process10.1016/j.mee.2015.03.033 ↗
74. Effect of brush treatment and brush contact sequence on cross contaminated defects during CMP in-situ cleaning10.9725/kstle.2015.31.6.239 ↗
75. Post-CMP cleaning of InGaAs surface for the removal of nanoparticle contaminants for sub-10nm device applications10.1149/2.0051905jss ↗
76. Frictional analysis of PVA brush for post CMP cleaning: effects of rotation speed, compression distance, and fluid viscosity10.4028/www.scientific.net/SSP.195.213 ↗
77. Environmental effects on post-CMP PVAc brush releasable contamination and break-in optimization for advanced logic and memory technologies10.1149/2.0161912jss ↗
78. A breakthrough method for the effective conditioning of PVA brush used for post-CMP process10.1149/2.0111906jss ↗
79. Comparative evaluation of organic contamination sources from roller and pencil type PVA brushes during the Post-CMP cleaning process10.1016/j.polymertesting.2020.106669 ↗
80. Study on possible root causes of contamination from an incoming PVA brush during post-CMP cleaning10.1016/j.polymertesting.2019.105921 ↗
81. Investigation of particle adhesion force for green nanotechnology in post-CMP cleaning10.1007/s12541-012-0148-6 ↗
82. Experimental investigation of contamination removal from slider bar surface by using various cleaning methods10.1016/j.apcbee.2012.06.072 ↗
83. Post-Cu CMP cleaning for colloidal silica abrasive removal10.1016/j.mee.2004.06.006 ↗
84. Characterization of TMAH based cleaning solution for post Cu-CMP application10.1016/j.mee.2012.04.006 ↗
85. Characterization of non-amine-based post-copper chemical mechanical planarization cleaning solution10.1016/j.mee.2014.02.034 ↗
86. Effect of a novel chelating agent on defect removal during post-CMP cleaning10.1016/j.apsusc.2016.03.230 ↗
87. Striking a balance: role of supramolecular assemblies on the modulation of the chemical and mechanical contributions during Post-STI CMP cleaning10.1016/j.matchemphys.2020.124170 ↗
88. Development of a novel wet cleaning solution for Post-CMP SiO2 and Si3N4 films10.1016/j.mssp.2021.106353 ↗
89. Metal surface chemical composition and morphology
90. Cleaning solutions for removal of ∼30 nm ceria particles from proline and citric acid containing slurries deposited on silicon dioxide and silicon nitride surfaces10.1149/2162-8777/ab8ffa ↗
91. Investigation of the effect of different cleaning forces on Ce-O-Si bonding during oxide post-CMP cleaning10.1016/j.apsusc.2021.149035 ↗
92. Application of surfactant for facilitating benzotriazole removal and inhibiting copper corrosion during post-CMP cleaning10.1016/j.mee.2018.09.005 ↗
93. Role of penetrating agent on colloidal silica particle removal during post Cu CMP cleaning10.1149/2.0111808jss ↗
94. Composite complex agent based on organic amine alkali for BTA removal in post CMP cleaning of copper interconnection10.1016/j.jelechem.2022.116187 ↗
95. The use of surfactants in the cleaning of works of art10.1016/j.cocis.2019.12.007 ↗
96. Effect of intermolecular interaction of compound surfactant on particle removal in post-Cu CMP cleaning10.1149/2162-8777/ac08d2 ↗
97. The effect of TAD based cleaning solution on post Cu CMP process10.1016/j.mee.2016.04.019 ↗
98. Selection and optimization of corrosion inhibitors for improved Cu CMP and post-Cu CMP cleaning10.1149/2.0101905jss ↗
99. Study on effect of complexing agents on Co oxidation/dissolution for chemical-mechanical polishing and cleaning process10.1016/j.mee.2020.111308 ↗
100. The role of carboxylic acids on nanoparticle removal in post CMP cleaning process for cobalt interconnects10.1016/j.matchemphys.2021.125199 ↗