journal article·2024-06

Investigation of linear and nonlinear optical characterization of triple blended polymers incorporated with varying content of eriochrome black T dye for low-cost optical technologies and limiting absorption

Doaa A. Nasrallah, T.H. AlAbdulaal, H.Y. Zahran, I.S. Yahia, M.I. Mohammed

Publisher page

Abstract

In this current research, polyvinyl alcohol (PVA)/polyethylene glycol (PEG)/methylcellulose (MC), (PVA-PEG-MC), (8:1:1) blend composite films reinforced with varying loadings of Eriochrome Black T dye were formed via a solution casting methodology. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Ultraviolet–visible (UV–vis) spectroscopy were applied to examine the influence of EBT dye packing on (PVA-PEG-MC) properties, especially optical ones. From XRD investigations, it became apparent that the incorporated EBT dye interrupted the crystallinity phase of the blend matrix. Furthermore, in the FTIR spectra, considerable band shifting and decreases in transmittance intensity for the doped samples were seen, which confirmed the development of the H-bond between the matrix and the dopant. The UV–Vis absorption and transmittance spectra are moved to longer wavelengths, suggesting the importance of these composites in light shielding devices. The indirect allowed transition was prominent in all studied samples, according to three effective approaches involving Tauc`s equation, the ASF model, and the ε i − h ν plot, where increasing the addition of EBT dye resulted in a drop of two optical energy band gap ( E g ( 1 ) i n d ) and ( E g ( 2 ) i n d ) values. Tailing in the band gap was shown to follow the Urbach rule. Six distinct models were utilized to determine the approximate values of the linear refractive index ( n ) using the estimated gap energies values, where the mean (average) value of the refractive index for the pristine (PVA- PEG-MC) matrix was 2.082. In contrast, it was 2.28 for the EBT dye composite film. Additionally, several other optical parameters were identified, including the extinction coefficient ( K ) , optical dielectric parameters, energy loss functions for surfaces and volumes, optical and electrical conductivity. Nonlinear optical parameters χ ( 3 ) , χ ( 1 ) and n 2 were calculated and analyzed for the EBT dye/(PVA-PEG-MC) composite films under examination. The optical limiting features revealed that the high amount of EBT dye incorporated in the ternary (PVA- PEG-MC) blend matrix reduces the output and normalized power utilizing different wavelength laser sources, which is suitable for optical limiting and laser attenuation in optoelectronic instruments. The unique results in the current work suggest applications for EBT dye/(PVA-PEG-MC) composite films in linear and nonlinear optical systems.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · Polymer Nanocomposites and Properties · Nonlinear Optical Materials Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Optical properties of Bromothymol Blue/PVA Composite: development of flexible high performance laser filter10.1007/s10965-021-02452-x ↗
2. Effect of PEG as a plasticizer on the electrical and optical properties of polymer blend electrolyte MC-CH-LiBF4 based film10.1016/j.rinp.2019.102735 ↗
3. Polymer/dye blends: preparation and optical performance: a short review10.1002/app.52861 ↗
4. Study and synthesis of polymer-blend PVA-PEG doped with 5wt% mgo and different wt% of Co3O4 thin film
5. From cellulose, shrimp and crab shells to energy storage EDLC cells: the study of structural and electrochemical properties of proton conducting chitosan-based biopolymer blend electrolytes10.3390/polym12071526 ↗
6. Microstructure study and linear/nonlinear optical performance of Bi-embedded PVP/PVA films for optoelectronic and optical cut-off applications10.3390/polym14091741 ↗
7. Modifying the microstructure of chitosan/methylcellulose polymer blend via magnesium nitrate doping to enhance its ionic conductivity for energy storage application10.1007/s10570-023-05114-x ↗
8. Metal doped PVA films for opto-electronics-optical and electronic properties, an overview10.3390/molecules26102886 ↗
9. Synthesis, thermal and dielectric performance of PVA-SrTiO3 polymer nanocomposites10.1016/j.molstruc.2021.130401 ↗
10. Study of impedance and solid-state double-layer capacitor behavior of proton (H+)-Conducting polymer blend electrolyte-based CS:PS polymers10.1007/s11581-020-03578-6 ↗
11. Modifying poly(vinyl alcohol) (PVA) from insulator to small-bandgap polymer: a novel approach for organic solar cells and optoelectronic devices10.1007/s11664-015-4191-9 ↗
12. Optical study on PVA/PEG blend doped with nano-silica10.1007/s11664-021-08785-z ↗
13. Enhancement of electrochemical stability window and electrical properties of CNT-based PVA−PEG polymer blend composites10.1021/acsomega.2c04933 ↗
14. High proton conducting polymer blend electrolytes based on Chitosan: dextran with constant specific capacitance and energy density10.3390/biom9070267 ↗
15. Characterization of pure and Pb2+ ion doped methylcellulose based biopolymer electrolyte films: optical and electrical properties10.20964/2018.12.34 ↗
16. A study of methylcellulose based polymer electrolyte impregnated with potassium ion conducting carrier: impedance, EEC modeling, FTIR, dielectric, and device characteristics10.3390/ma14174859 ↗
17. Synthesis and characterization of La3+ ions incorporated (PVA/PVP) polymer composite films for optoelectronics devices10.1007/s10854-019-02793-w ↗
18. The effect of polymer blend on the third order nonlinearity of oxazine dye doped films by using Z-scan techniques
19. A comprehensive review on magnetic carbon nanotubes and carbon nanotube-based buckypaper for removal of heavy metals and dyes10.1016/j.jhazmat.2021.125375 ↗
20. Photocatalytic degradation of Eriochrome Black T dye by ZnO nanoparticles using multivariate factorial, kinetics and isotherm models
21. Polymers and dyes: developments and applications10.3390/polym7040717 ↗
22. Preparation and characterization of PVA/Congo red polymeric composite films for a wide scale laser filters10.1016/j.optlastec.2016.10.008 ↗
23. Design of a low-cost laser CUT-OFF filters using carmine dye-doped PVA polymeric composite films10.1016/j.rinp.2020.103203 ↗
24. Simple fabrication of PVA/PEG blend doped with methyl blue dye with superior optical limiting performance: enhanced luminescence property, structural, and dielectric properties10.1016/j.mseb.2023.116390 ↗
25. Promising naphthol green B dye doped (PVOH-PEG) composite films as a multifunctional material with engineered optical band gap, tunable dielectric properties and nonlinear J–E characteristics10.1088/1402-4896/ac6990 ↗
26. Optical properties of Bromothymol Blue/PVA Composite: development of flexible high performance laser filter10.1007/s10965-021-02452-x ↗
27. A green approach to the synthesis of Eriochrome black-T capped silver nanoparticles and its electrochemical detection of L-tryptophan and L-tyrosine in blood sample and antibacterial activity
28. Multifunction applications of TiO2/poly(vinyl alcohol) nanocomposites for laser attenuation applications10.1016/j.physb.2018.12.031 ↗
29. Synthesis of polymer nanocomposites based on [methyl cellulose](1-x):(CuS)x (0.02M ≤ x ≤ 0.08 M) with desired optical band gaps10.3390/polym9060194 ↗
30. Electrical impedance and conduction mechanism analysis of biopolymer electrolytes based on methyl cellulose doped with ammonium iodide10.1007/s11581-016-1731-0 ↗
31. Structural and optical properties of azo dye doped polyether sulfone
32. Synthesis and characterization of multiwalled carbon nanotubes modified with octadecylamine and polyethylene glycol10.1016/j.arabjc.2012.12.028 ↗
33. Optical study on PVA/PEG blend doped with nano-silica10.1007/s11664-021-08785-z ↗
34. Studies on the mechanical, morphological and electrical properties of highly dispersible graphene oxide reinforced polypyrrole and polyvinyl alcohol blend composites Mater
35. Structural and electrical properties of polyvinyl alcohol (PVA):Methyl cellulose (MC) based solid polymer blend electrolytes inserted with sodium iodide (NaI) salt10.1016/j.arabjc.2021.103388 ↗
36. Synthesis, structural and optical properties of tin oxide nanoparticles and its CMC/PEG–PVA nanocomposite films
37. Solid polymer electrolytes based on methylcellulose: FT-IR and ionic conductivity studies10.1080/1023666X.2010.493291 ↗
38. Radiation crosslinking polymerization of poly (vinyl alcohol) and poly (ethylene glycol) with controlled drug release10.1007/s10965-015-0861-9 ↗
39. Silver nanoparticles blended PEG/PVA nanocomposites synthesis and characterization for food packaging10.1016/j.arabjc.2020.05.005 ↗
40. Effect of ammonium thiocyanate on ionic conductivity and thermal properties of polyvinyl alcohol–methylcellulose–based polymer electrolytes10.1007/s11581-020-03753-9 ↗
41. Carbon dioxide separation by polyethylene glycol and glutamic acid/polyvinyl alcohol composite membrane10.3390/su132313367 ↗
42. Li-ion conduction of plasticized PVA solid polymer electrolytes complexed with various lithium salts10.1016/j.ssi.2004.01.020 ↗
43. Poly (vinyl alcohol)– LiBOB complexes for lithium – air cells10.1016/j.electacta.2013.04.010 ↗
44. Effects of methylcellulose on the properties and morphology of polysulfone membranes prepared by phase inversion
45. Conductivity study and Fourier transform infrared (FTIR) characterization of methyl cellulose solid polymer electrolyte with sodium iodide conducting ion
46. Structural, optical and antibacterial activity studies on CMC/PVA blend filled with three different types of green synthesized ZnO nanoparticles10.1007/s10904-023-02622-y ↗
47. Bioadsorption of Eriochrome Black T (EBT) onto Iraqi rice husk as adsorbent
48. Remediation of Eriochrome Black T-contaminated aqueous solutions utilizing H3PO4-modified berry leaves as a non-conventional adsorbent10.1080/19443994.2014.950995 ↗
49. Cetyltrimethylammonium bromide-treated Phragmites australis powder as novel polymeric adsorbent for hazardous Eriochrome Black T removal from aqueous solutions Polymer
50. Efficient removal of Eriochrome Black T (EBT) dye and chromium (Cr) by hydrotalcite-derived Mg-Ca-Al mixed metal oxide composite10.3390/catal12101247 ↗
51. Spectroscopic, thermal, structural and electrical studies on VO2‏ ions doped PVA/MAA:EA polymer blend films
52. Characterization of pure and Pb2+ ion doped methylcellulose based biopolymer electrolyte films: optical and electrical properties10.20964/2018.12.34 ↗
53. Mechanistical studies on the electron-induced degradation of polymethylmethacrylate and Kapton10.1039/c0cp01130d ↗
54. Optical study of poly(vinyl alcohol)/hydroxypropyl methylcellulose blends10.1007/s10853-011-5533-5 ↗
55. Synthesis of very-fine PbS nanoparticles dispersed homogeneously in MC matrix: effect of concentration on the structural and optical properties of host polymer10.1088/2053-1591/ab4b9a ↗
56. Effect of gamma-irradiation on (PEO/PVP)/Au nanocomposite: materials for electrochemical and optical applications10.1016/j.matdes.2016.02.082 ↗
57. The study of structural and optical properties of PVA: PbO2 based solid polymer nanocomposites10.1007/s10854-016-5363-y ↗
58. Optical analysis and UV-blocking filter of cadmium iodide-doped polyvinyl alcohol polymeric composite films: synthesis and dielectric properties10.1007/s10904-020-01534-5 ↗
59. Enhanced structural, optical, and electronic properties of In2O3 and Cr2O3 nanoparticles doped polymer blend for flexible electronics and potential applications10.1007/s10904-020-01528-3 ↗
60. Structural and optical characterization of PVA:KMnO 4 based solid polymer electrolyte10.1016/j.rinp.2016.11.050 ↗
61. Impact of in situ preparation of CdS filled PVP nano-composite10.1016/j.saa.2014.04.049 ↗
62. Spectroscopic analysis of PMMA/PVC blends containing CoCl210.1016/j.rinp.2015.11.003 ↗
63. Structural and optical characterization of Cr2O3 nanostructures: evaluation of its dielectric properties10.1063/1.4867012 ↗
64. Spectroscopic studies and thermal properties of PCL/PMMA biopolymer blend. Egypt
65. Enhancement of physico-chemical, optical, dielectric and antimicrobial properties of polyvinyl alcohol/carboxymethyl cellulose blend films by addition of silver doped hydroxyapatite Nanoparticles10.1007/s10965-022-02943-5 ↗
66. Conduction in non-crystalline systems V. Conductivity, optical absorption and photoconductivity in amorphous semiconductors10.1080/14786437008221061 ↗
67. The long-wavelength edge of photographic sensitivity and of the electronic absorption of solids10.1103/PhysRev.92.1324 ↗
68. The impact of sodium chloride as dopant on optical and electrical properties of polyvinyl alcohol10.3934/matersci.2018.3.533 ↗
69. Effect of cobalt oxide nanoparticles on the nano-scale free volume and optical properties of biodegradable CMC/PVA films10.1007/s10924-017-1151-x ↗
70. Influence of Gamma irradiation on the structural and optical characteristics of Li ion-doped PVA/PVP solid polymer electrolytes10.1007/s12648-018-1286-1 ↗
71. Singh · 2019 · vol. 13
72. Optical and electrical properties of aluminum doped zinc oxide thin films at various doping concentrations10.2109/jcersj2.117.1263 ↗
73. Defect generation, d-d transition and band gap reduction in Cu-doped TiO2 nanoparticles
74. Linear and nonlinear optical properties of PVA:SA blend reinforced by TiO2 nanoparticles prepared by flower extract of aloe vera for optoelectronic applications10.3390/coatings13040699 ↗
75. Polymer composites with 0.98 transparencies and small optical energy band gap using a promising green methodology: structural and optical properties10.3390/polym13101648 ↗
76. Structural, optical and electrical properties of PVA/PEO/SnO2 new nanocomposites for flexible devices10.1007/s42341-020-00189-w ↗
77. A novel correction method toward extraction of reflectance and linear refractive index of some borosilicate glasses doped with BaTiO310.1007/s11664-022-09858-3 ↗
78. Synthesis, structural and optical properties of tin oxide nanoparticles and its CMC/PEG–PVA nanocomposite films
79. Study of optical properties for (PVA-PEG-ZnO) nanocomposites
80. Vanadium chloride impregnated polyvinyl alcohol composite as efficient linear, non-linear, and limiting optical applications: microstructure, electrical, and optical properties
81. Band gap tuning and fluorescence properties of lead sulfide Pb0.9A0.1S (A:Fe, Co and Ni) nanoparticles by transition metal doping10.1016/j.optmat.2017.12.015 ↗
82. The optical characterization of polyvinyl alcohol: cobalt nitrate solid polymer electrolyte films10.5185/amlett.2015.5687 ↗
83. Wise · 1998
84. Cd0.9Co0.1S nanostructures concentration study on the structural and optical properties of SWCNTs/PVA blend10.1016/j.cplett.2021.138701 ↗
85. Development and investigation of high performance PVA/NiO and PVA/CuO nanocomposites with improved physical, dielectric and mechanical properties10.3390/ma15155154 ↗
86. Investigation of structural and optical characteristics of biopolymer composites based on polyvinyl alcohol inserted with PbS nanoparticles10.3390/coatings13030578 ↗
87. Modulation of the optoelectronic properties of polyimide (Kapton-H) films by gamma irradiation for laser attenuation and flexible space structures10.1016/j.radphyschem.2022.110026 ↗
88. PVA/PVP/PEG polymeric blend loaded with nano-Zn0.75-xFexCd0.25S: effect of iron concentration on the optical characteristics10.1007/s00339-022-05351-0 ↗
89. Linear/nonlinear optical properties of functional inorganic MgO nano-filler in PVA transparent polymer for flexible optoelectronic devices10.1016/j.physb.2022.414617 ↗
90. Modification of the structure and linear/nonlinear optical characteristics of PVA/chitosan blend through CuO doping for eco-friendly applications10.3390/polym15102391 ↗
91. Optically and thermally induced changes of structure, linear and non-linear optical properties of chalcogenides thin films10.1016/S0022-3093(03)00446-0 ↗
92. Mechanical reinforcement in polymer melts filled with polymer grafted nanoparticles10.1021/ma201200m ↗
93. Semiempirical relation between non-linear susceptibility (refractive index), linear refractive index and optical gap and its application to amorphous chalcogenides
94. Influence of Cu-doping on linear and nonlinear optical properties of high-quality ZnO thin films obtained by spin-coating technique10.1002/pssb.202000472 ↗
95. Structural and optical properties of nanocrystalline aluminum phthalocyanine chloride thin films10.1016/j.mssp.2015.04.014 ↗
96. Empirical relation between the linear and the third-order nonlinear optical susceptibilities10.1103/PhysRevB.2.2045 ↗
97. The effect of Li4Ti5O12 nanoparticles on structural, linear and third order nonlinear optical properties of PVDF films10.1088/2053-1591/ab1efb ↗
98. Kramers-Kronig analysis of the optical linearity and nonlinearity of nanostructured Ga-doped ZnO thin films10.1016/j.optlastec.2020.106691 ↗
99. Relations between the refractive index and energy gap of semiconductors10.1002/pssb.2221310202 ↗
100. On the penn gap in semiconductors10.1002/pssb.2220930257 ↗