journal article·2024-05

First-principles study of mechanical, electronic structure, and optical properties for cubic fluoroperovskite XMgF3 (X=Al, Ga, In, Tl) under high pressure*

Jingyi Zhang, Yan Chen, Shanjun Chen, Jie Hou, Ruijie Song, Zai-Fa Shi

Publisher page

Abstract

The effects of pressure on the mechanical, electrical structure, and optical characteristics of cubic fluoroperovskite XMgF 3 (X = Al, Ga, In, Tl) are investigated based on the first principles methods. The calculated lattice constants are in good agreement with those in the literature. According to the mechanical properties, all the compounds exhibit ductility and anisotropy, and the inter-atomic binding bonds of these materials are ionic. According to Kleinman`s parameter, bond stretching is dominant in XMgF 3 (X = Al, Ga, In, Tl). Among all studied compounds, AlMgF 3 carries the highest machinable index, indicating that it is the most machinable and suitable material for industrial applications. The electronic structures show that AlMgF 3 and InMgF 3 are indirect bandgap semiconductors, while GaMgF 3 and TlMgF 3 are direct bandgap insulators at 0 GPa. The values of band gap for all the compounds decrease with the increasing pressure. X-s and F-p orbital states contribute primarily to the top of the valence band, whereas X-p orbital states dominate the bottom of the conduction band. The overall shape of electron state density under pressure does not change significantly, but its peak widens. The optical properties of XMgF 3 (X = Al, Ga, In, Tl) crystal at zero pressure and high pressures are further investigated. The results indicate that XMgF 3 compounds have outstanding ultraviolet (UV) absorption properties and could be used in UV optical devices. Moreover, the low reflectivity values of XMgF 3 crystals make the compounds potential anti-reflective coating materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Heusler alloys: electronic and magnetic properties · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. High thermoelectric efficiency fluoride perovskite materials of AgMF3 (M=Zn, Cd)
2. Pressure-dependent elasto-mechanical stability and thermoelectric properties of MYbF3 (M=Rb, Cs) materials for renewable energy10.1002/er.6408 ↗
3. Investigation of structural, opto-electronic, mechanical and thermoelectric properties of Rb-based fluoro-perovskites RbXF3 (X=Rh, Os, Ir) via first-principles calculations10.1016/j.jscs.2023.101627 ↗
4. Electronic structure, elastic, optical and thermodynamic properties of cubic perovskite NaBaF3 with pressure effects: first-principles calculations10.1016/j.rinp.2021.103860 ↗
5. Room‐temperature wavelength‐tunable single‐band upconversion luminescence from Yb3+/Mn2+ codoped fluoride perovskites ABF310.1002/adom.201500732 ↗
6. First-principles calculations to investigate structural, electronics, optical, and mechanical properties of Bi-based novel fluoroperovskites TBiF3 (T=Hg, Xe) for optoelectronic applications10.1016/j.mssp.2023.107399 ↗
7. Structural, electronic, elastic, and magnetic properties of NaQF3 (Q=Ag, Pb, Rh, and Ru) flouroperovskites: a first-principle outcomes10.1002/er.7319 ↗
8. Electronic and magnetic properties of the Jahn-Teller active fluoride NaCrF3 from first-principles calculations10.1103/PhysRevB.102.245142 ↗
9. Remarkable high thermoelectric conversion efficiency materials of BeMF3 (M=Al, Y)10.1002/adts.202000171 ↗
10. Material design of indium-based compounds: possible candidates for charge, valence, and bond disproportionation and superconductivity
11. DFT-based computational investigations of structural, mechanical, optoelectronics, and thermoelectric properties of InXF3 (X=Be and Sr) ternary fluoroperovskites compounds10.1088/1402-4896/acd726 ↗
12. Electronic structure, mechanical, optical and thermodynamic properties of cubic perovskite InBeF3 with pressure effects: first-principles calculations10.1016/j.rinp.2023.106590 ↗
13. First-principles investigation of the physical properties of indium based fluoroperovskites InAF3 (A=Ca, Cd and Hg)10.1016/j.mssp.2020.105385 ↗
14. Modeling structural, elastic, electronic and optical properties of ternary cubic barium based fluoroperovskites MBaF3 (M=Ga and In) compounds based on DFT10.1016/j.mssp.2021.106345 ↗
15. First-principal investigations of electronic, structural, elastic and optical properties of the fluoroperovskite TlLF3 (L=Ca, Cd) compounds for optoelectronic applications10.1039/D2RA00464J ↗
16. Strong anharmonicity and high thermoelectric performance of cubic thallium-based fluoride perovskites TlXF3 (X=Hg, Sn, Pb)10.1039/D2CP05382A ↗
17. Investigating the physical properties of thallium-based ternary TlXF3 (X=Be, Sr) fluoroperovskite compounds for prospective applications10.1021/acsomega.3c00549 ↗
18. Theoretical investigation of the structural, electronic, and mechanical properties of the magnesium-based fluoroperovskite compounds XMgF3 (X=Ga, Al, In)
19. A DFT study of structural and electronic properties of cubic thallium based fluoroperovskites TlBF3 (B=Ge, Sn, Pb, Zn, Cd, Hg, Mg, Ca, Sr, Ba)10.1016/j.cocom.2022.e00747 ↗
20. Ab initio investigations of structural, elastic, electronic and optical properties of the fluoroperovskite TIXF3 (X=Ca, Cd, Hg, and Mg) compounds10.1088/2053-1591/ab5e37 ↗
21. Elucidating stress–strain relations of ZrB12 from first-principles studies10.1021/acs.jpclett.0c02656 ↗
22. Electronic and optical properties of CsGeX2M (X, M=Br, Cl, I) perovskites for solar cell applications: first-principles study using PBE and TB-mBJ potentials10.1016/j.mssp.2022.106488 ↗
23. Pressure induced variations in the optoelectronic response of ASnX3 (A=K, Rb; X=Cl, Br, I) perovskites: a first principles study10.1016/j.mssp.2022.106977 ↗
24. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
25. Theory of nonuniform electronic systems. I. Analysis of the gradient approximation and a generalization that works10.1103/PhysRevB.21.5469 ↗
26. On the effectiveness of ultra-soft pseudopotentials in plane-wave based molecular electronic structure calculations10.1016/S0166-1280(98)00478-3 ↗
27. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
28. General methods for geometry and wave function optimization10.1021/j100203a036 ↗
29. Screened hybrid density functionals applied to solids10.1063/1.2187006 ↗
30. On the elastic moduli of a crystal and Voigt and Reuss relations10.1143/JPSJ.20.635 ↗
31. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
32. First-principles investigation of the ultra-wide band gap halides perovskite XBeF3 (X=Na, K) with pressure effects10.1088/1402-4896/ad05ec ↗
33. On the stability of crystal lattices. I10.1017/S0305004100017138 ↗
34. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
35. Theoretical predictions of structure and related properties of intermetallics10.1179/mst.1992.8.4.345 ↗
36. First-principles investigation for the hydrogen storage properties of XTiH3 (X=K, Rb, Cs) perovskite type hydrides
37. First-principles study of structural, elastic, electronic and optical properties of cubic perovskite AgXF3 (X=Be, Mg, Ca and Sr) compounds
38. Effect of mixed halide contents on structural, electronic, optical and elastic properties of CsSnI3−xBrx for solar cell applications: first-principles study10.1088/2053-1591/ab727d ↗
39. ELATE: an open-source online application for analysis and visualization of elastic tensors10.1088/0953-8984/28/27/275201 ↗
40. First principles computation of insulator–semiconductor–metal transition and its impact on structural, elastic, mechanical, anisotropic and optical properties of CsSrF3 under systematic static isotropic pressure10.1080/08927022.2023.2165127 ↗
41. Pressure induced variations from semiconducting to metallic for halide perovskite NaBeCl3 by first-principle calculations
42. Ab-initio calculations for the study of the hydrogen storage properties of CsXH3 (X=Co, Zn) perovskite-type hydrides
43. Superconductivity in compressed ternary alkaline boron hydrides10.1103/PhysRevB.105.224107 ↗
44. Structural phase transition and superconductivity of ytterbium under high pressure10.1103/PhysRevB.105.214503 ↗
45. First-principles investigations for the hydrogen storage properties of XVH3 (X=Na, K, Rb, Cs) perovskite type hydrides10.1016/j.jmrt.2023.08.218 ↗
46. Electronic structure, mechanical, optical, and thermodynamic characteristics of cubic perovskite LiMgF3 under pressure effect calculated first-principles