journal article·2022-11

Earth-abundant nontoxic ternary calcium nitrides inverse perovskites for single-junction solar cells: Ab-initio simulations

S. Dahbi, N. Tahiri, O. El Bounagui, H. Ez-Zahraouy

Publisher page

Abstract

A single-junction solar cell with a direct and ideal photovoltaic forbidden bandgap value which maximizes the photon absorbed is needed for the diversity of solar energy conversion, as well as other optoelectronic applications. Here, the ternary calcium nitrides inverse perovskites Ca 3PN, Ca 3AsN, Ca 3SbN, and Ca 3 BiN were investigated in the frame of Density Functional Theory (DFT). The principal novelty of this research essentially projects detailed information on the structural, elastic, electronic, transport, and optical properties of Ca 3PN, Ca 3AsN, Ca 3SbN, and Ca 3 BiN compounds. The understudy compounds are founded to be thermodynamically and elastically stable at ambient pressure. The electronic properties demonstrate that the understudy compounds have direct semiconductor behaviors with the ideal solar cells forbidden band gaps values which overlap very well with the visible zone of the solar spectrum leading to these materials high absorption coefficients percentage of around 80%, low reflectance and transmittance along the visible zone. Besides, the inter-atomic bonds between M and surrounded atoms are ionic while Ca–N inter-atomic bond is polar covalent. Otherwise, the understudy compounds exhibit low recombination rates as well as low charge carrier`s effective masses which boost the carrier mobility. In addition, with rising temperatures up to 1000 K, the Ca 3PN, Ca 3AsN, and Ca 3SbN compounds undergo from n to p-type semiconductor behaviors while Ca 3 BiN shows a p-type semiconductor behavior. While the CSN compound has better characteristics in TE applications at 50 K where the ZT value is 80%. Accordingly, these out studying properties make the understudy compounds as new single-junction solar cells non-silicon based.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Karnaz · 2013 · 163
2. Chapter 32 – fabrication of microbial fuel cells with nanoelectrodes for enhanced bioenergy production, Nanomaterials
3. Lignocellulosic biorefineries: the path forward, sustainable biofuels, opportunities and challenges
4. Moodley · 2021 · 1
5. Rafiee · 2019 · 331
6. Calcium hafnate perovskite from an insulator to a semiconductor for photovoltaic and photocatalytic hydrogen production from water splitting applications10.1016/j.spmi.2021.107058 ↗
7. Density functional theory (DFT) study of BaScO3H0.5 compound and its hydrogen storage properties10.1139/cjp-2018-0733 ↗
8. Calcium hafnate perovskite from an insulator to a semiconductor for photovoltaic and photocatalytic hydrogen production from water splitting applications10.1016/j.solener.2019.08.011 ↗
9. Semiconductor nanowires for energy conversion10.1021/cr900075v ↗
10. Crystalline silicon solar cells: state-of-the-art and future developments
11. High-throughput computational assessment of previously synthesized semiconductors for photovoltaic and photoelectrochemical devices10.1021/acsenergylett.7b01312 ↗
12. Green, thin-film solar cells: review of materials, technologies and commercial status10.1007/s10854-007-9177-9 ↗
13. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
14. Solution-synthesized In4SnSe4 semiconductor microwires with a direct band gap10.1021/acs.chemmater.6b04216 ↗
15. Photoexcited electron lifetimes influenced by momentum dispersion in silicon nanowires10.1021/acs.jpcc.9b00639 ↗
16. Electronic, optical, and thermoelectric properties of perovskite BaTiO3 compound under the effect of compressive strain
17. Krivovichev, Minerals with antiperovskite structure: a review
18. Electronic properties of antiperovskite materials from state-of-the-art density functional theory10.1155/2015/495131 ↗
19. First principles prediction of the ground state crystal structures of antiperovskite compounds A3PN (A= Be, Mg, Ca, Sr, Ba and Zn)10.1016/j.matpr.2019.02.114 ↗
20. Semiconductor-to-Metal reconstructive phase transition and superconductivity of anti-perovskite Ca3PN under hydrostatic pressure10.1039/D0TC02507K ↗
21. Elastic, electronic and optical properties of cubic antiperovskites SbNCa3 and BiNCa310.1016/j.commatsci.2009.05.011 ↗
22. Ferromagnetism induced by calcium vacancies in Ca3BiP anti-perovskite: an ab-initio Calculation10.1016/j.jssc.2020.121520 ↗
23. Variable-cell-shape-based structural optimization applied to calcium nitrides10.1103/PhysRevB.57.7615 ↗
24. Structural and elastic properties under pressure effect of the cubic antiperovskite compounds ANCa3 (A = P, As, Sb, and Bi)10.1016/j.physleta.2009.03.016 ↗
25. Structure, and properties of anti-perovskite nitrides Ca3MN, M = P, as, Sb, Bi, Ge, Sn, and Pb10.1016/S0022-4596(05)80276-2 ↗
26. Optoelectronic and thermoelectric properties of A3AsN (A = Mg, Ca, Sr and Ba) in cubic and orthorhombic phase10.1016/j.jmrt.2021.05.032 ↗
27. Density functional theory of electronic structure10.1021/jp960669l ↗
28. Blaha · 2001
29. More accurate generalized gradient approximation for solids10.1103/PhysRevB.73.235116 ↗
30. Performance of the modified Becke-Johnson potential for semiconductors10.1103/PhysRevB.86.195106 ↗
31. Hybrid functionals for solids with an optimized Hartree–Fock mixing parameter10.1088/0953-8984/25/43/435503 ↗
32. A code for calculating band-structure dependent quantities10.1016/j.cpc.2006.03.007 ↗
33. Electronic and optical properties of Ca3MN (M = Ge, Sn,Pb, P, as, Sb and Bi) antiperovskite compounds10.1007/s11664-016-4563-9 ↗
34. Structural and optoelectronic properties of X3ZN (X = Ca, Sr, Ba; Z = as, Sb, Bi) anti-perovskite compounds10.1007/s11664-015-4330-3 ↗
35. Chalcogens' impurities and a single F-center in perovskite SrHfO3compound: ab initio calculations10.1016/j.mssp.2021.106271 ↗
36. Elastic properties of perovskite-type hydride NaMgH3 for hydrogen storage10.1016/j.ijhydene.2012.11.047 ↗
37. Elastic properties of perovskite-type hydrides LiBeH3 and NaBeH3 for hydrogen storage10.1016/j.ijhydene.2017.01.109 ↗
38. Electronic structure, magnetism and elastic properties of inverse perovskite carbide: a first principles study
39. First-principles study of elastic properties in perovskite PbTiO310.1016/j.msea.2007.03.028 ↗
40. Structural, elastic and thermo-electronic properties of paramagnetic perovskite PbTaO310.1039/C6RA10468A ↗
41. Electronic structures and elastic properties of a family of metal-free perovskites10.1039/C9QM00133F ↗
42. On the stability of crystal lattices. I
43. DFT investigations on the electronic structure, magnetism, thermodynamic and elastic properties of newly predicted cobalt based antiperovskites: Co3XN (X = Pd, Pt & Rh)10.1016/j.rinp.2020.103112 ↗
44. Structural, electronic and magnetic properties of new full heusler alloys Rh2CrZ (Z = Al, Ga, In): first-principles calculations10.1016/j.cjph.2019.04.002 ↗
45. Electronic, Optical and Elastic properties of cubic perovskite CsPbI3: using First principles study10.1016/j.ijleo.2016.09.013 ↗
46. Structural, electronic and elastic properties of the cubic CaTiO3 under pressure: a DFT study10.1063/1.4926437 ↗
47. Structural, elastic and electronic properties of XNCa3 (X= Ge, Sn and Pb) compounds10.1016/j.ssc.2009.01.025 ↗
48. Theoretical exploration of mixed-anion antiperovskite semiconductors M3XN (M = Mg, Ca, Sr, Ba; X = P, As, Sb, Bi)
49. Density functional theory analysis of structural, electronic, and optical properties of mixed-halide orthorhombic inorganic perovskites10.1021/acsomega.1c04806 ↗
50. Electronic structure and transport of Bi2Te3 and BaBiTe310.1103/PhysRevB.61.8162 ↗
51. First-principles study on the effective masses of zinc-blend-derived Cu2Zn-IV-VI4 (IV=Sn, Ge, Si and VI=S, Se)10.1063/1.4759322 ↗
52. Role of interlayer coupling on the evolution of band-edges in few-layer phosphorene10.1021/acs.jpclett.5b02047 ↗
53. Tailoring the electronic band gap and band edge positions in C2N monolayer by P and as substitution for photocatalytic water splitting10.1021/acs.jpcc.7b07776 ↗
54. Semiconductors used in photovoltaic and photocatalytic devices: assessing fundamental properties from DFT10.1021/jp409724c ↗
55. High-throughput combinatorial database of electronic band structures for inorganic scintillator materials10.1021/co200012w ↗
56. Magnetic, magnetocaloric and thermoelectric investigations of perovskite LaFeO3 compound: first principles and Monte Carlo calculations10.1016/j.comptc.2021.113421 ↗
57. Magnetocaloric and thermoelectric properties of the perovskite LaMnO3 material: a DFT study and Monte Carlo technique10.1080/01411594.2021.1974860 ↗
58. The new eco-friendly lead-free zirconate perovskites doped with chalcogens for solar cells: ab initio calculations10.1016/j.optmat.2020.110442 ↗
59. Importance of spin‐orbit coupling on photovoltaic properties of Pb‐free vacancy ordered double perovskites halides X2TeY6 (X = Cs, Rb, and Y = I, Br, Cl): first‐principles calculations10.1002/er.7631 ↗
60. Theoretical investigations of electronic structure and optical properties of S, Se or Te doped perovskite ATiO3 (A = Ca, Ba, and Sr) materials for eco-friendly solar cells10.1016/j.spmi.2021.107124 ↗
61. The Effect of chalcogens-doped with dilation Strain on the Electronic, optic, and thermoelectric properties of BaSnO3 perovskite10.1007/s43207-022-00212-1 ↗
62. From unstable CsSnI3 to air-stable Cs2SnI6: a lead-free perovskite solar cell light absorber with bandgap of 1.48 eV and high absorption coefficient10.1016/j.solmat.2016.09.022 ↗