Performance and mechanism of co-doped Ce–Mn perovskite for degradation of tetracycline via heterogeneous photocatalysis coupled PMS oxidation
Source abstract
Abstract
In this work, CeMn 1-xM xO 3 (M = Cu, Fe and Co) perovskites were synthesized and used as efficient heterogeneous catalyst for degrade of tetracycline chloride (TC-HCl) via photocatalysis coupled peroxymonosulfate (PMS) oxidation under visible-light illumination. Metal doping significantly improved the catalytic activity of perovskites. The CeMn 0.6Co 0.4O 3/PMS/Vis system demonstrated excellent performance that 96.4% of 60 mg/L of TC-HCl was degraded within 30 min with a high reaction rate constant of 0.136 min −1, which is about 4.3 times higher than that of CeMnO 3 , and almost 4.4 times higher than that of pure PMS. Results confirmed the addition of Co led to mixed valence states of Mn (III)/Mn (Ⅳ) and Co (II)/Co (III) in the perovskite structure, promoting the electron transfer from the CeMn 0.6Co 0.4O 3 to PMS. Moreover, CeMn 0.6Co 0.4O 3 exhibited good stability over a wide pH range (3.0–11.0). The rapid transformation of Co (II)/Co (III) redox pairs is critical for PMS activation as the limiting step. Superoxide radicals (•O 2 −), electron (e − ) and sulfate radical (SO 4 − •) were the dominant oxidative species responsible for removing TC-HCl. This work proposed some new insights to understand the heterogeneous reaction mechanism during PMS oxidation and photocatalytic process and promote the development of perovskites catalyst for removal of organic pollutants.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Advanced oxidation water treatment · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Chemical biology of tetracycline antibiotics10.1139/O08-002 ↗
2. Morone · Pharmaceuticals and Personal Care Products: Waste Management and Treatment Technology · 2019 · 13
3. A global perspective on the use, sales, exposure pathways, occurrence, fate and effects of veterinary antibiotics (VAs) in the environment10.1016/j.chemosphere.2006.03.026 ↗
4. Distribution and potential risk assessment of antibiotic pollution in the main drinking water sources of Nanjing, China10.1007/s11356-020-08516-7 ↗
5. Plasma regulates active sites on biochar to boost peroxomonosulfate activation for phenol degradation10.1016/j.jece.2022.107833 ↗
6. Z-scheme mesoporous photocatalyst constructed by modification of Sn3O4 nanoclusters on g-C3N4 nanosheets with improved photocatalytic performance and mechanism insight10.1016/j.apcatb.2018.07.049 ↗
7. Facile photochemical synthesis of Au/Pt/g-C3N4 with plasmon-enhanced photocatalytic activity for antibiotic degradation10.1021/acsami.5b01212 ↗
8. Degradation of norfloxacin by CoFe2O4-GO composite coupled with peroxymonosulfate: a comparative study and mechanistic consideration10.1016/j.cej.2017.10.040 ↗
9. Magnetic MnFe2O4 activated peroxymonosulfate processes for degradation of bisphenol A: performance, mechanism and application feasibility10.1016/j.apsusc.2018.07.198 ↗
10. Radical generation by the interaction of transition metals with common oxidants10.1021/es035121o ↗
11. Degradation of organic contaminants in water with sulfate radicals generated by the conjunction of peroxymonosulfate with cobalt10.1021/es0263792 ↗
12. Synergistic effect of cyano defects and CaCO3 in graphitic carbon nitride nanosheets for efficient visible-light-driven photocatalytic NO removal
13. Acceleration of levofloxacin degradation by combination of multiple free radicals via MoS2 anchored in manganese ferrite doped perovskite activated PMS under visible light10.1016/j.cej.2021.133933 ↗
14. Performance of nano-Co3O4/peroxymonosulfate system: kinetics and mechanism study using Acid Orange 7 as a model compound10.1016/j.apcatb.2007.11.009 ↗
15. Application of perovskites towards remediation of environmental pollutants: an overview10.1007/s13762-016-1233-7 ↗
16. Perovskite oxides: preparation, characterizations, and applications in heterogeneous catalysis10.1021/cs500606g ↗
17. Perovskite oxide nanosheets with tunable band-edge potentials and high photocatalytic hydrogen-evolution activity10.1002/anie.201408441 ↗
18. Tunable oxygen vacancy formation energetics in the complex perovskite oxide SrxLa1-xMnyAl1-yO310.1021/cm5033755 ↗
19. A synergetic effect of ytterbium-doping and ammoniation on enhancing UV and visible photocatalytic activities of TiO210.1016/j.cplett.2018.01.051 ↗
20. Cobalt-doped perovskite-type oxide LaMnO3 as bifunctional oxygen catalysts for hybrid lithium-oxygen batteries10.1002/asia.201701561 ↗
21. Preparation and application of perovskite-type oxides for electrocatalysis in oxygen/air electrodes10.1007/s11771-019-4095-6 ↗
22. Study on the catalytic performance of LaMnO3 for the RhB degradation10.1016/j.jtice.2020.01.011 ↗
23. The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH310.1016/j.jhazmat.2009.09.112 ↗
24. Promotional effect of CeO2 modified support on V2O5-WO3/TiO2 catalyst for elemental mercury oxidation in simulated coal-fired flue gas10.1016/j.fuel.2015.03.001 ↗
25. Nanostructured Co-Mn containing perovskites for degradation of pollutants: insight into the activity and stability10.1016/j.jhazmat.2018.01.054 ↗
26. Removal of CO in excess hydrogen over CuO/Ce1-xMnxO2 catalysts10.1016/j.cej.2011.06.012 ↗
27. Novel synthesis of Pd-CeMnO3 perovskite based on unique ultrasonic intervention from combination of Sol-Gel and impregnation method for low temperature efficient oxidation of benzene vapour10.1016/j.ultsonch.2018.06.009 ↗
28. Experimental study on a low-temperature SCR catalyst based on MnO(x)/TiO(2) prepared by sol-gel method10.1016/j.jhazmat.2006.11.045 ↗
29. Facile synthesis of Co(3)O(4)-CeO(2) composite oxide nanotubes and their multifunctional applications for lithium ion batteries and CO oxidation10.1016/j.jcis.2017.01.074 ↗
30. Role of Ce3+ valence state and surface oxygen vacancies on enhanced electrochemical performance of single step solvothermally synthesized CeO2 nanoparticles10.1016/j.electacta.2018.07.184 ↗
31. The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH310.1016/j.jhazmat.2009.09.112 ↗
32. The highly active catalysts of nanometric CeO2-supported cobalt oxides for soot combustion10.1016/j.apcatb.2008.03.017 ↗
33. Natile · 2005 · vol. 16 · 3403
34. One-pot solvothermal synthesis of magnetically separable rGO/MnFe2O4 hybrids as efficient photocatalysts for degradation of MB under visible light10.1016/j.matchemphys.2019.03.076 ↗
35. Effect of calcination temperature on low-temperature NH3-SCR activity and the resistance of SO2 with or without H2O over Fe-Mn-Zr catalyst10.1016/j.jtice.2018.07.027 ↗
36. MxCo(3-x)O(4) (M = Co, Mn, Fe) porous nanocages derived from metal-organic frameworks as efficient water oxidation catalysts
37. Manganese-lanthanum oxides modified with silver for the catalytic combustion of methane10.1016/j.jcat.2004.07.022 ↗
38. Enhancing performance of Co/CeO2 catalyst by Sr doping for catalytic combustion of toluene10.1016/j.apsusc.2018.03.070 ↗
39. Cobalt-doped ceria/reduced graphene oxide nanocomposite as an efficient oxygen reduction reaction catalyst and supercapacitor material10.1021/acs.jpcc.7b06846 ↗
40. Delaminating Ti3C2 MXene by blossom of ZnIn2S4 microflowers for noble-metal-free photocatalytic hydrogen production10.1016/j.jmst.2021.12.028 ↗
41. Elemental mercury oxidation over manganese-based perovskite-type catalyst at low temperature10.1016/j.cej.2015.12.057 ↗
42. Low-temperature NO reduction performance of peanut shell-derived few-layer graphene loaded CeCoxMn1-xO3 catalyst10.1080/01932691.2020.1721008 ↗
43. CeO2/g-C3N4 nanocomposite: a perspective for electrochemical sensing of anti-depressant drug10.1016/j.snb.2018.06.036 ↗
44. Gamma rays interactions with transition metal doped-soda lime phosphate glasses evaluated by collective optical, FTIR spectral measurements10.1007/s12633-018-9949-2 ↗
45. High-yield preparation, versatile structural modification, and properties of layered cobalt hydroxide nanocones10.1002/adfm.201400193 ↗
46. Magnetically separable NiFe2O4/sepiolite catalyst for enhanced ozonation treatment of quinoline and bio-treated coking wastewater in a catalytic ozonation system10.1016/j.psep.2021.12.026 ↗
47. Identification of the arsenic resistance on MoO3 doped CeO2/TiO2 catalyst for selective catalytic reduction of NOx with ammonia10.1016/j.jhazmat.2016.07.058 ↗
48. Visible-light-enhanced photothermocatalytic activity of ABO3-type perovskites for the decontamination of gaseous styrene10.1016/j.apcatb.2017.02.066 ↗
49. Efficient photocatalytic degradation of Safranin O by integrating solar-UV/TiO2/persulfate treatment: implication of sulfate radical in the oxidation process and effect of various water matrix components10.1016/j.jphotochem.2017.05.028 ↗
50. Heat-activated persulfate oxidation of atrazine: implications for remediation of groundwater contaminated by herbicides10.1016/j.cej.2014.10.097 ↗
51. Degradation of trimethoprim by thermo-activated persulfate oxidation: reaction kinetics and transformation mechanisms10.1016/j.cej.2015.10.050 ↗
52. Construction of Z-scheme CuFe2O4/MnO2 photocatalyst and activating peroxymonosulfate for phenol degradation: synergistic effect, degradation pathways, and mechanism10.1016/j.envres.2021.111736 ↗
53. Heterogeneous activation of peroxymonosulfate by LaCo1-xCuxO3 perovskites for degradation of organic pollutants10.1016/j.jhazmat.2018.04.021 ↗