journal article·2021-08

Band gap and emission wavelength tuning of Sr-doped BaTiO3 (BST) perovskites for high-efficiency visible-light emitters and solar cells

Abdelhamid Boubaia, Abdenacer Assali, Smail Berrah, Hamza Bennacer, Imane Zerifi, Abdelkader Boukortt

Publisher page

Abstract

Abstract A numerical full-potential linearized augmented plane method within density functional theory is performed to study the electronic structure include, energy band gap, total and partial density of states and chemical bonding as well as optical constants of Ba1−xSrxTiO3 (BST) (0≤ x ≤ 1) crystalizes in the paraelectric and ferroelectric phases. Results obtained using the improved [Koller-Tran-Blaha]-mBJ potential show excellent agreement with the experimental data. It is observed that the band gap in BST crystals increases with increasing Sr dopants due to the resonant interaction of O_2p orbitals mixed with co-doping Sr_4d states with the top of the valence band. BST exhibits a direct band gap at x range ~0.04–0.88 covering the wavelengths range ~397–436 nm within the visible spectrum region. The dielectric functions and optical constants such as refractive index, reflectivity and absorption coefficient are computed for radiation range 0–10 eV in comparison with measured data. The critical-point energies in various optical spectra are due to interband transitions from occupied O_2p states and little admixture of Sr_4p/d and Ba_4p orbitals localize in the top of the valence band to unoccupied Ti_3d, Sr_4p, and Ba_4d orbitals localize in the bottom of the conduction band. Excellent ultraviolet absorption (~4–8 eV) and visible regime transparency are achieved. BaSrTiO3 (BST) perovskite is a promising candidate for manufacturing low-cost high-efficiency solar cells and designing of novel sources of light operating in the visible spectrum region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Ferroelectric and Piezoelectric Materials · Photorefractive and Nonlinear Optics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Microstructure and dielectric properties of BaxSr1−xTiO3 ceramics10.1016/j.mseb.2005.02.056 ↗
2. Heteroepitaxial growth of quaternary BaxSr1−xTiO3 thin films by ArF excimer laser ablation10.1143/JJAP.33.L533 ↗
3. Nagaraj · Appl. Phys. Lett. · 1999 · 74 · 319410.1063/1.124104 ↗
4. Tunable passive integrated circuits using BST thin films10.1080/10584580215481 ↗
5. Hashimoto · 2009
6. Tunable thin film bulk acoustic wave resonator based on BaxSr1−xTiO3 thin film10.1109/TUFFC.2010.1417 ↗
7. Gevorgian · 2013
8. Ferroelectric barium titanate nanocubes as capacitive building blocks for energy storage applications10.1021/am502547h ↗
9. Sol-gel synthesis of BaTiO3 based films for photonic applications10.1557/PROC-606-169 ↗
10. Electro-optic characteristics of (001)-oriented Ba0.6Sr0.4TiO3 thin films10.1063/1.1556962 ↗
11. Infrared spectra and second-harmonic generation in barium strontium titanate and lead zirconate-titanate thin films:“Polaron” artifacts10.1063/1.1596715 ↗
12. Characterizations of electrical and optical properties on ferroelectric photodiode of barium strontium titanate (Ba0.5Sr0.5TiO3) films based on the annealing time differences and its development as light sensor on satellite technology10.1016/j.proenv.2015.03.042 ↗
13. Irzaman · Procedia Environmental Sciences · 2016 · 33 · 60710.1016/j.proenv.2016.03.114 ↗
14. Recent development in lead-free perovskite piezoelectric bulk materials10.1016/j.pmatsci.2018.06.002 ↗
15. Takenaka · 2013 · 429
16. Lead-free Ba(1−x)SrxTiO3 ceramics for room-temperature pyroelectric energy conversion10.1016/j.ceramint.2018.02.009 ↗
17. Enhanced pyroelectric properties of porous Ba0.67Sr0.33TiO3 ceramics fabricated with carbon nanotubes10.1016/j.jallcom.2015.02.153 ↗
18. Revisiting the phase transitions in BaxSr1−xTiO3 at low doping range (x≤0.1)10.1016/j.jallcom.2018.03.185 ↗
19. Systematic investigation of the annealing temperature and composition effects on the dielectric properties of sol–gel BaxSr1−xTiO3 thin films10.1016/j.jeurceramsoc.2012.07.041 ↗
20. Electrical properties and crystal structure of (Ba0.5Sr0.5)TiO3 thin films prepared on Pt/SiO2/Si by RF magnetron sputtering, Jpn10.1143/JJAP.34.196 ↗
21. Dielectric relaxation of Ba0.7Sr0.7TiO3 thin films from 1 mHz to 20 GHz10.1063/1.120796 ↗
22. Structural and mechanical properties characterization of barium strontium titanate (BST) ceramics10.1007/s10832-011-9664-5 ↗
23. Effect of different dopants Ba and Ag on the properties of SrTiO3 nanopowders10.1016/j.rinp.2015.10.005 ↗
24. Composition-dependent ferroelectric properties of Ba1−xSrxTiO3 ceramics10.1080/01411590600892062 ↗
25. Phase formation and microstructure of BaxSr1−xTiO3 ceramics prepared by direct current arc discharge plasma process10.1016/j.matlet.2014.03.019 ↗
26. Ba1−xSrxTiO3 plates: synthesis through topochemical conversion, piezoelectric and ferroelectric characteristics10.1016/j.ceramint.2018.08.198 ↗
27. Preparation and characterization of Ba1−xSrxTiO3 by sol-gel method10.14233/ajchem.2019.21660 ↗
28. Structure and dielectric behavior of nano-structure ferroelectric BaxSr1−xTiO3 prepared by sol–gel method10.1016/j.jallcom.2010.05.060 ↗
29. Nadaud · 2015 · 90
30. Optical-induced absorption tunability of barium strontium titanate film10.1016/j.optmat.2016.08.012 ↗
31. structural, optical and electrical characteristics BaSrTiOx thin films: effect of deposition pressure and annealing10.1016/j.jnoncrysol.2017.08.036 ↗
32. Structural, ultraviolet-shielding, dielectric and ferroelectric properties of Ba1−xSrxTiO3 (x= 0.35) thin films prepared by sol-gel method in presence of pyrrole10.1016/j.tsf.2004.08.171 ↗
33. Dielectric and optical properties of melt-grown BaTiO310.1016/0022-3697(68)90164-9 ↗
34. Dielectric properties of epitaxial Ba1−xSrxTiO3 FILMS on MgO substrates10.1142/S1793604711001610 ↗
35. Optical characterization of Ba1−xSrxTiO3 thin film properties using ultraviolet-visible Spectroscopy10.1063/5.0003054 ↗
36. Bulk properties and electronic structure of SrTiO3, BaTiO3, PbTiO3 perovskites: an ab initio HF/DFT study10.1016/j.commatsci.2003.08.036 ↗
37. DFT study of the stability of oxygen vacancy in cubic ABO3 perovskites10.1007/s10853-014-8731-0 ↗
38. First-principles study of electronic structure and optical properties of barium strontium titanates (BaxSr1−xTiO3)10.1016/j.apsusc.2004.12.043 ↗
39. The lattice stabilities and electronic structure of BaxSr1−xTiO3 solid solutions by first-principles calculations10.1080/00150190902966966 ↗
40. A-site strain and displacement in Ba1−xCaxTiO3 and Ba1−xSrxTiO3 and the consequences for the Curie temperature10.1021/cm502158n ↗
41. First-principles study of lattice instabilities in BaxSr1−xTiO310.1063/1.1324445 ↗
42. Structural and electromechanical properties of Sr-substituted barium titanate (BST) as potential material for high performance electroacoustic devices10.1016/j.mtcomm.2020.101643 ↗
43. Accurate band gaps of semiconductors and insulators with a semilocal exchange-correlation potential10.1103/PhysRevLett.102.226401 ↗
44. WIEN2k: an APW+ lo program for calculating the properties of solids10.1063/1.5143061 ↗
45. Improving the modified Becke-Johnson exchange potential10.1103/PhysRevB.85.155109 ↗
46. Inhomogeneous electron gas10.1103/PhysRev.136.B864 ↗
47. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
48. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
49. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
50. Stability and electronic properties of isomers of B/N co-doped graphene10.1007/s13204-013-0280-3 ↗
51. Structural and electronic properties of BN co-doped and BN analogue of twin graphene sheets: a density functional theory study10.1016/j.jpcs.2019.109115 ↗
52. Noble metals enhanced catalytic activity of anatase TiO2 for hydrogen evolution reaction10.1016/j.ijhydene.2018.10.093 ↗
53. The hydrogenation mechanism of PtAl and IrAl thermal barrier coatings from first-principles investigations10.1016/j.ijhydene.2020.04.290 ↗
54. Tsymbal · 2007
55. Dielectric characteristics of doped Ba1−xSrxTiO3 at the paraelectric state10.1016/S0254-0584(97)80267-2 ↗
56. Electronic structure, chemical bonding, and optical properties of paraelectric BaTiO310.1103/PhysRevB.62.8828 ↗
57. T Pet al. Electronic structure and elastic properties of ATiO3 (A = Ba, Sr, Ca) perovskites: a first principles study
58. Bulk electronic structure of SrTiO3: experiment and theory10.1063/1.1415766 ↗
59. Optical absorption edge of SrTiO3 around the 105-K phase transition10.1103/PhysRevLett.27.146 ↗
60. Optical absorption of single-crystal strontium titanate10.1103/PhysRev.94.724 ↗
61. First-principles calculations for SrTiO3 (100) surface structure10.1016/S0039-6028(02)01730-2 ↗
62. Optical gap of strontium titanate (deviation from Urbach tail behavior)10.1103/PhysRevLett.25.1298 ↗
63. Schreiber · 1973
64. Transition to the ferroelectric state in barium titanate10.1103/PhysRev.112.413 ↗
65. Structural, electronic and optical properties of Ca3Bi2: first-principles investigation10.1016/j.cjph.2018.10.004 ↗
66. Ab initio density functional theory investigation of the structural, electronic and optical properties of Ca3Sb2 in hexagonal and cubic phases10.1016/j.jssc.2013.09.026 ↗
67. Highly desirable semiconducting materials for mid-IR optoelectronics: dilute bismide InAs1−xBix alloys10.1016/j.materresbull.2017.06.011 ↗
68. Novel BTlGaN semiconducting materials for infrared opto-electronic devices10.1016/j.infrared.2017.01.006 ↗
69. First principles studies on the electronic structure and band structure of paraelectric SrTiO3 by different approximations10.4236/jmp.2011.29111 ↗
70. Optical characteristics of dilute gallium phosphide bismide: promising material for near-infra photonic device applications10.1016/j.physleta.2019.126147 ↗
71. Structural and opto-electronic properties of InP1−xBix bismide alloys for MID−infrared optical devices: a DFT + TB-mBJ study, Physica B: condensed Matter –Elsevier10.1016/j.physb.2017.09.058 ↗
72. Electronic structure and optical properties of dilute boron-bismide quaternary alloys BxGa1–xAs1–yBiy/GaAs for infrared optoelectronic devices10.1016/j.ijleo.2017.01.059 ↗
73. Optoelectronic properties of cubic BxInyGa1−x−yN alloys matched to GaN for designing quantum well Lasers: first-principles study within mBJ exchange potential10.1016/j.mssp.2015.03.033 ↗
74. Review—visible LEDs: more than efficient light10.1149/2.0402001JSS ↗
75. On the understanding of the optoelectronic properties of S-doped MoO3 and O-doped MoS2 bulk systems: a DFT perspective10.1039/D0TC02066D ↗
76. Semiconductors used in photovoltaic and photocatalytic devices: assessing fundamental properties from DFT10.1021/jp409724c ↗
77. Battye · 1976 · vol. 19 · 269
78. The electronic structure of SrTiO3 and some simple related oxides (MgO, Al2O3, SrO, TiO2)10.1016/0038-1098(77)90101-6 ↗
79. Derbenwick · 1970
80. Comparative study of ABO3 perovskite compounds. 1. ATiO3 (A = Ca, Sr, Ba, and Pb) perovskites10.1021/jp013301j ↗
81. First-principles study on the structure instability and electronic structure of cubic Ba0.5Sr0.5TiO310.1016/j.ssc.2005.05.012 ↗
82. Draxl · 1998
83. Yu · 1999 · vol. 233
84. Zhang · 2005
85. Antonov · 2004
86. Optical properties and band structure of SrTiO3 and BaTiO310.1103/PhysRev.140.A651 ↗
87. Optical properties of bulk and thin-film SrTiO3 on Si and Pt10.1116/1.1303741 ↗
88. Vacuum ultraviolet reflectivity and band structure of SrTiO3 and BaTiO3