Enhanced performance of perovskite photodetectors fabricated by two-step spin coating approach
Source abstract
Abstract
Abstract Metal halide perovskite films were prepared using two different deposition techniques, namely one-step spin coating (OSSC) and two-step spin coating (TSSC) and used as the active layer in perovskite photodetectors (PDs). Surface morphology studies revealed that perovskite thin films grown by OSSC exhibited large density of pin holes and non-uniform surface coverage. While, the film produced by TSSC shows full surface coverage with lesser pin holes. By comparing the device performance of the photodetectors based on OSSC and TSSC deposited films, we found that TSSC deposited film based PD demonstrated a significant enhancement in the performance (Responsivity of 1.05 A/W and detectivity of 1.27 × 1011 Jones @ −1 V) in comparison to the PD based on OSSC deposited films (Responsivity of 0.019 A/W and a detectivity of 1.77 × 109 Jones @ −1 V), which can be attributed to the higher absorbance, lesser trap density, narrower trap width, larger carrier mobility and lower leakage current, arising from better surface morphology and crystallinity of TSSC deposited films. Impedance analysis of PD prepared from TSSC film showed a relatively large charge recombination resistance and a long lifetime than PD fabricated from OSSC film, signifying less charge recombination events, which is in consistent with the high performance achieved with the TSSC film based PD.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Understanding charge transport in lead iodide perovskite thin-film field-effect transistors10.1126/sciadv.1601935 ↗
2. Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes
3. Efficient and stable perovskite photodetectors based on thiocyanate-assisted film formation10.1021/acsami.9b01715 ↗
4. A broad-spectral-response perovskite and high detectivity10.1039/C8QM00303C ↗
5. Synthesis and characterization of methylammonium lead iodide perovskite and its application in planar hetero-junction devices10.1088/1361-6641/aac066 ↗
6. Defects engineering for high-performance perovskite solar cells10.1038/s41528-018-0035-z ↗
7. How to make a most stable perovskite solar cell
8. Poorkazem · 2018 · 1
9. Xiao · 2017
10. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
11. Stable and durable CH3NH3PbI3 perovskite solar cells at ambient conditions10.1088/0957-4484/27/23/235404 ↗
12. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
13. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
14. Materials Science in Semiconductor Processing Enhanced e ffi ciency and stability of perovskite solar cells by synergistic e ff ect of magnesium acetate introducing into CH 3 NH 3 PbI 310.1016/j.mssp.2019.104671 ↗
15. All-optical control of lead halide perovskite microlasers
16. Single crystal hybrid perovskite field-effect transistors10.1038/s41467-018-07706-9 ↗
17. Perovskite-based photodetectors: materials and devices10.1039/C6CS00896H ↗
18. Solution-processed hybrid perovskite photodetectors with high detectivity10.1038/ncomms6404 ↗
19. High-performance ultraviolet-visible tunable perovskite photodetector based on solar cell structure10.1007/s40843-017-9028-y ↗
20. Fabrication and characterization of mesoscopic perovskite photodiodes10.1109/TNANO.2016.2517239 ↗
21. Photodiode response in a CH3NH3PbI3/CH3NH3SnI3 heterojunction10.1021/acsami.6b12392 ↗
22. A broad-spectral-response perovskite photodetector with a high on/off ratio and high detectivity10.1039/C8QM00303C ↗
23. High-sensitive and fast response to 255 nm deep-UV light of CH3NH3PbX3 (X=Cl, Br, I) bulk crystals10.1098/rsos.180905 ↗
24. Halide lead perovskites for ionizing radiation detection10.1038/s41467-019-08981-w ↗
25. Flexible perovskite based X-ray detectors for dose monitoring in medical imaging applications10.1016/j.phmed.2018.04.001 ↗
26. Promoting crystalline grain growth and healing pinholes by water vapor modulated post-annealing for enhancing the efficiency of planar perovskite solar cells10.1039/C6TA05288F ↗
27. Solvent-antisolvent ambient processed large grain size perovskite thin films for high- performance solar cells
28. Dynamic growth of pinhole-free conformal CH 3 NH 3 PbI 3 film for perovskite solar cells10.1021/acsami.5b11679 ↗
29. Pin-hole free perovskite film for solar cells application prepared by controlled two-step spin-coating method10.1088/1757-899X/196/1/012037 ↗
30. Understanding the effect of chlorobenzene and isopropanol anti-solvent treatments on the recombination and interfacial charge accumulation in efficient planar perovskite solar cells10.1039/C8TA03782E ↗
31. Surface engineering of perovskite films for efficient solar cells
32. Solvent engineering improves efficiency of lead-free tin-based hybrid perovskite solar cells beyond 9%10.1021/acsenergylett.8b01588 ↗
33. Shi · 2014
34. Unusually dispersed AgI quantum dots for Efficient HTL-free10.1021/acsami.9b14023 ↗
35. Transamidation of dimethylformamide during alkylammonium lead triiodide film formation for perovskite solar cells10.1557/jmr.2016.272 ↗
36. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
37. Optoelectronic properties of MAPbI3 perovskite/titanium dioxide heterostructures on porous silicon substrates for cyan sensor applications10.1186/s11671-015-1114-x ↗
38. Identification and characterization of the intermediate phase in hybrid organic-inorganic MAPbI3 perovskite10.1039/C5DT04420K ↗
39. A modified two-step sequential deposition method for preparing perovskite CH3NH3PbI3 solar cells10.1039/C6RA05718G ↗
40. Superlattices and Microstructures Solution processed graphene as electron transport layer for bulk heterojunction based devices10.1016/j.spmi.2018.06.037 ↗
41. Solution processed trilayer structure for high-performance perovskite photodetector10.1186/s11671-018-2808-7 ↗
42. High-performance photodiode- type photodetectors based on polycrystalline formamidinium lead iodide perovskite thin films
43. High-performance germanium quantum dot photodetectors in the visible and near infrared10.1016/j.mssp.2018.03.024 ↗
44. Bio-inspired materials as interfacial layers for high performance perovskite photodetectors10.1364/OME.9.003968 ↗
45. Vapour-assisted multi-functional perovskite thin films for solar cells and photodetectors10.1039/C6TC00747C ↗
46. High-performance ultraviolet-visible tunable perovskite photodetector based on solar cell structure10.1007/s40843-017-9028-y ↗
47. Ultrasensitive solution-processed perovskite hybrid photodetectors10.1039/C5TC00673B ↗
48. How contact layers control shunting losses from pinholes in thin-film solar cells10.1021/acs.jpcc.8b09400 ↗
49. Pinhole induced efficiency variation in perovskite solar cells10.1063/1.4996315 ↗
50. Poly-(3-hexylthiophene)/graphene composite based organic photodetectors: the influence of graphene insertion10.1016/j.tsf.2019.02.013 ↗
51. Impact of grain boundary defect on performance of perovskite solar cell10.1016/j.mssp.2018.01.022 ↗
52. Identifying dominant recombination mechanisms in perovskite solar cells by measuring the transient ideality factor10.1103/PhysRevApplied.11.044005 ↗
53. Temperature-dependent charge transport in solution-processed perovskite solar cells with tunable trap concentration and charge recombination10.1039/C7TC02646C ↗
54. A comparative investigation of trap-limited hole transport properties in organic bulk heterojunctions10.1088/0268-1242/26/11/115006 ↗
55. C60 concentration influence on MEH-PPV : C60 bulk heterojunction-based Schottky devices10.1007/s11664-018-6629-3 ↗
56. The effect of impurities on the impedance spectroscopy response of CH 3 NH 3 PbI 3 perovskite solar cells10.1021/acs.jpcc.6b11584 ↗
57. D-A-D-Typed hole transport materials for efficient perovskite solar cells: tuning photovoltaic properties via the acceptor group10.1021/acsami.8b04003 ↗
58. The effect of hole transporting layer in charge accumulation properties of p-i-n perovskite solar cells10.1063/1.4991030 ↗