journal article·2020-03Open access

Effect of band gap on power conversion efficiency of single-junction semiconductor photovoltaic cells under white light phosphor-based LED illumination

Grażyna Jarosz, Rafał Marczyński, Ryszard Signerski

Abstract

On the basis of the detailed balance principle, curves of efficiency limit of single-junction photovoltaic cells at warm and cool white light phosphor-based LED bulbs with luminous efficacy exceeding 100 lm/W have been simulated. The effect of energy band gap and illuminance on the efficiencies at warm and cool light is discussed. The simulations carried out show that maximum power conversion efficiency at 1000 lx reaches 52.0% for cool light and 53.6% for warm one, while the optimal energy band gap is 1.80 eV and 1.88 eV, respectively. The simulated limits are also referenced to experimental data presented in literature to show that there is still a lot of room for improving indoor photovoltaic cells.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: solar cell performance optimization · Chalcogenide Semiconductor Thin Films · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Efficiency simulations of thin films chalcogenide photovoltaic cells for different indoor lighting conditions10.1016/j.tsf.2011.01.362 ↗
2. Some suggestions for photovoltaic power generation using artificial light illumination10.1016/j.solmat.2006.03.026 ↗
3. Efficient flexible thin film silicon module on plastics for indoor energy harvesting10.1016/j.solmat.2014.07.048 ↗
4. Photovoltaic performance of organic photovoltaics for indoor energy harvester10.1016/j.orgel.2017.05.023 ↗
5. Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting10.1016/j.apenergy.2015.07.031 ↗
6. Maximum efficiencies of indoor photovoltaic devices10.1109/JPHOTOV.2012.2225023 ↗
7. Comparison of the indoor performance of 12 commercial PV products by a simple model10.1002/ese3.110 ↗
8. Evaluation of indoor photovoltaic power production under directional and diffuse lighting conditions10.1016/j.solmat.2019.110010 ↗
9. Rational design of cost-effective dyes for high performance dye-sensitized cells in indoor light environments10.1016/j.orgel.2018.04.048 ↗
10. Limiting efficiency of indoor silicon photovoltaic devices10.1364/OE.26.028238 ↗
11. Indoor light recycling: a new home for organic photovoltaics10.1039/C6TC03344J ↗
12. A proposal for typical artificial light sources for the characterization of indoor photovoltaic applications10.3390/en7031500 ↗
13. Performance of III-V solar cells as indoor light energy harvesters10.1109/JPHOTOV.2015.2487825 ↗
14. Organic photovoltaics for low light applications10.1016/j.solmat.2011.07.011 ↗
15. Polymer surface modification to optimize inverted organic devices under indoor light conditions10.1016/j.solmat.2018.04.023 ↗
16. Organic photovoltaic cells-promising indoor light harvesters for self-sustainable electronics10.1039/C7TA10875C ↗
17. Highly efficient perovskite solar cells for light harvesting under indoor illumination via solution processed SnO2/MgO composite electron transport10.1016/j.nanoen.2018.04.027 ↗
18. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
19. Würfel · 2005
20. Luque · 2003
21. Limiting efficiencies of ideal single and multiple energy gap terrestrial solar cells10.1063/1.328272 ↗
22. 2012
23. Tabulated values of the Shockley-Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
24. AlGaAs photovoltaic for indoor energy harvesting in mm-scale wireless sensor nodes10.1109/TED.2015.2434336 ↗
25. The impact of spectra composition of while LEDs on spinach (Spinacia oleracea) growth and development
26. Schubert · 2006
27. Photovoltaic effect in the single-junction DBP/PTCBI organic system under low intensity of monochromatic light10.1016/j.cap.2019.08.011 ↗
28. Photovoltaic efficiency limits and material disorder10.1039/c2ee03178g ↗
29. Effects of grain boundaries on conversion efficiencies of single-crystal-like GaAs thin-film solar cells on flexible metal tapes10.1016/j.solmat.2019.04.032 ↗
30. Ultrathin high band gap solar cells with improved efficiencies from the world's oldest photovoltaic material10.1038/s41467-017-00582-9 ↗
31. Solar cell efficiency tables (Version 53)10.1002/pip.3102 ↗
32. A feasible scalable porphyrin due for dye-sensitized solar cells under one sun and dim light environments10.1039/C6TA04097G ↗
33. Designing a ternary photovoltaic cell for indoor light harvesting with a power conversion efficiency exceeding 20%10.1039/C8TA01728J ↗
34. Outstanding indoor performance of perovskite photovoltaic cells – effect of device architectures and interlayers