A new route to synthesizing La-doped SrTiO3 nanoparticles using the sol-gel auto combustion method and their characterization and photocatalytic application
Source abstract
Abstract
Abstract The Sr1-xLaxTiO3 (SLTO) nanopowder with varied La contents was successfully synthesized by a new route sol-gel auto combustion technique. The results of the X-ray Diffraction (XRD) patterns of the undoped and La-doped SLTO samples showed a pure phase with cubic perovskite structure, together with the position of the (110) peak slightly shifted toward the lower 2θ angle with increasing amounts of La dopant. The La doping increases the lattice parameter and the unit cell density due to the substitution of the larger ionic radius of La3+ into the smaller ionic radius of the Sr2+. As well, the crystallite size and particle size of the SLTO samples decreased as the La doping content increased. Specific surface area and total pore volume increased with the increase of La doping content. The band gap (Eg) was determined for the samples to be 4.10–4.12 eV. The photoluminescence (PL) at room temperature showed violet, green, and blue emissions at an excitation of 327 nm. The photocatalytic activity of SLTO, resulting from degrading methylene blue (MB) under UV irradiation, increased with increasing La content and reached a maximum at x = 0.07. The effect of La doping on Eg, PL, and mechanism photocatalytic activity of SLTO nanopowders, resulting from the oxygen vacancy in the SLTO structure, was also proposed and discussed. The results emphasize the significance of sol-gel auto combustion technique, which preserves the nanostructure of SLTO and improving photocatalytic activity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Advanced Photocatalysis Techniques · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. A review of synthesis and morphology of SrTiO3 for energy and other applications10.1002/er.4505 ↗
2. Recent advances and applications of semiconductor photocatalytic technology
3. Enhancement in photocatalytic activity of SrTiO3 by tailoring particle size and defects
4. High photocatalytic activity of V-doped SrTiO3 porous nanofibers produced from a combined electrospinning and thermal diffusion process10.3762/bjnano.6.132 ↗
5. Hydrothermal synthesis and visible-light-driven photocatalytic degradation for tetracycline of Mn-doped SrTiO3 nanocubes10.1016/j.apsusc.2015.02.008 ↗
6. Fabrication of three-dimensional porous La-doped SrTiO3 microspheres with enhanced visible light catalytic activity for Cr(VI) reduction10.1007/s11705-018-1700-4 ↗
7. High-Figure-of-Merit thermoelectric La-doped A-site-deficient SrTiO3 ceramics10.1021/acs.chemmater.5b04616 ↗
8. Glycine–nitrate-based solution-combustion synthesis of SrTiO310.1016/j.jallcom.2015.08.227 ↗
9. Effect of crystallization on the band structure and photoelectric property of SrTiO3 sol–gel derived thin film10.1016/j.jallcom.2015.09.017 ↗
10. Influence of La concentration on structural, morphological, optical and magnetic properties of Sr1-x LaxTiO3 nanopowders10.1016/j.physb.2019.07.015 ↗
11. Insight into efficient photocatalytic elimination of tetracycline over SrTiO3(La,Cr) under visible-light irradiation: the relationship of doping and performance10.1016/j.apsusc.2019.04.261 ↗
12. Sol-gel auto combustion synthesis and characterizations of cobalt ferrite nanoparticles: different fuels approach10.1016/j.mseb.2019.114388 ↗
13. Synthesis and Characterization of Sr-doped LaFeO3 perovskite by sol-gel auto-combustion method10.1088/1742-6596/1259/1/012017 ↗
14. Combustion synthesis and characterization of perovskite SrTiO3 nanopowders10.1016/j.jallcom.2007.03.080 ↗
15. Preparation of SrTiO3 nanomaterial by a sol–gel-hydrothermal method10.1007/s10853-009-4099-y ↗
16. Preparation of SrTiO3 nanopowder via sol-gel combustion method10.1080/00150193.2013.843412 ↗
17. One-step synthesis of single-phase (Co, Mg, Ni, Cu, Zn) O High entropy oxide nanoparticles through SCS procedure: thermodynamics and experimental evaluation10.1016/j.jeurceramsoc.2020.08.044 ↗
18. Development of a novel combustion synthesis method for synthesizing of ceramic oxide powders10.1016/j.mseb.2004.03.023 ↗
19. Lanthanum-doped mesostructured strontium titanates synthesized via sol–gel combustion route using citric acid as complexing agent10.1016/j.matchemphys.2016.06.078 ↗
20. Photocatalytic properties of SrTiO3 nanoparticles prepared by a polyacrylamide gel route10.1016/j.matlet.2011.07.019 ↗
21. Lattice expansion and local lattice distortion in Nb- and La-doped SrTiO3 single crystals investigated by x-ray diffraction and first-principles calculations10.1103/PhysRevB.98.134114 ↗
22. Thermal conductivity of A-site cation-deficient La-substituted SrTiO3 produced by spark plasma sintering
23. Pure and doped SrTiO3 powders obtained by ultrasonic synthesis10.4028/www.scientific.net/MSF.869.3 ↗
24. Kittel · 2005
25. Flux-mediated doping of SrTiO3 photocatalysts for efficient overall water splitting10.1039/C5TA04843E ↗
26. Influence of synthesis route on the morphology of SrTiO3 particles10.1557/opl.2013.967 ↗
27. Low temperature hydrothermal synthesis of SrTiO3 nanoparticles without alkali and their effective photocatalytic activity10.1007/s40145-016-0203-3 ↗
28. Thermoelectric and optical properties of CuAlO2 synthesized by direct microwave heating10.1016/j.cap.2014.06.024 ↗
29. Optical, electrical properties, characterization and synthesis of Ca2Co2O5 by sucrose assisted sol gel combustion method10.1016/j.apt.2014.01.006 ↗
30. Photoluminescence of SrTiO3: influence of particle size and morphology10.1021/cg301168k ↗
31. Band gap energy of SrTiO3 thin film prepared by the liquid phase deposition method
32. Bandgap engineering in perovskite oxides: Al-doped SrTiO310.1063/1.4824023 ↗
33. Self-originating two-step synthesis of core–shell structured La-doped SrTiO3 nanocubes10.1016/j.jascer.2013.02.004 ↗
34. Theoretical and experimental study of La/Ni co-doped SrTiO3 photocatalyst10.1016/j.mseb.2010.04.036 ↗
35. Preparation and thermoelectric properties of La-doped SrTiO3 ceramics10.1007/s11664-010-1452-5 ↗
36. Direct preparation of La-doped SrTiO3 thermoelectric materials by mechanical alloying with carbon burial sintering10.1016/j.jeurceramsoc.2017.09.022 ↗
37. Development of SrTiO3 photocatalysts with visible light response using amino acids as dopant sources for the degradation of organic pollutants in aqueous systems10.3390/catal8110528 ↗
38. Investigation on versatile behaviour of Cd doped SrTiO3 perovskite structured compounds10.1016/j.ssc.2019.113716 ↗
39. Ag-SrTiO3/TiO2 composite nanostructures with enhanced photocatalytic activity10.1016/j.materresbull.2019.110492 ↗
40. Enhancing visible-light-induced photocatalytic activity by coupling with wide-band-gap semiconductor: a case study on Bi2WO6/TiO210.1016/j.apcatb.2011.09.025 ↗
41. Highly efficient photocatalytic degradation of methylene blue by P2ABSA-modified TiO2 nanocomposite due to the photosensitization synergetic effect of TiO2 and P2ABSA10.1039/C7RA02423A ↗