journal article·2024-09

A novel investigation into strain-induced changes in the physical properties and solar cell performances of lead-free Ca3NCl3 perovskite

Mohammad Fokhrul Islam Buian, MOST. Sadia Islam Ria, Avijit Ghosh, Md. Azizur Rahman, Mohammad Shakhawat Hossain, Md Farad Ahmmed, Asif Ahammad Miazee, Md Muminur Rahman Sonic, H.A. Alrafai

Publisher page

Abstract

The first-principle calculations were employed to analyze the structural, thermodynamic, electronic, optical, and mechanical properties of calcium-based halide perovskites, Ca 3NCl 3, under pressure variations from +6 % to −6%. The Ca 3NCl 3 materials are thermodynamically and dynamically stable, as indicated by the negative final enthalpy values obtained under pressures ranging from −6% to +6 %. The charge density maps confirm the existence of both ionic and covalent bonding features. The unstressed Ca 3NCl 3 has a direct bandgap of 1.66 eV with PBE functions, 2.32 eV with HSE functions and 1.48 eV with spin-orbit coupling (SOC) at the Γ point. When subjected to compressive strain, the bandgap reduces to 1.37 eV(PBE), 1.93 eV(HSE) and 1.08 eV(SOC) at −6% strain, causing a redshift in absorption coefficient peaks. Conversely, under tensile strain, the bandgap slightly rises to 1.92 eV(PBE), 2.60 eV(HSE) and 1.73 eV(SOC) at +6 % strain, resulting in a blueshift in absorption coefficient peaks. The Ca 3NCl 3 materials show enhanced optical absorption, loss function, conductivity, dielectric function, refractive index and reflectivity under applied pressure, making them more appropriate for use in solar absorbers, surgical tools, and optoelectronic devices. The investigation of the mechanical properties reveals that the Ca 3NCl 3 perovskite is mechanically stable. Moreover, with rising pressure (tensile to compressive), elastic constants, elastic moduli, ductility, machinability index, bulk modulus, shear modulus, pugh`s ratio, young modulus and anisotropy all rise. The photovoltaic (PV) performance of novel cell configurations, featuring Ca 3NCl 3 as an absorber and CdS as an Electron Transport Layer (ETL), was systematically studied using the SCAPS-1D simulator. This structure achieved a maximum power conversion efficiency (PCE) of 20.88 %, with a current density (J SC) of 19.184 mAcm −2, a voltage (V OC) of 1.22 V, and a fill factor (FF) of 89.06. The valuable findings from our simulations will aid in the experimental design of an efficient Ca 3NCl 3 -based new inorganic perovskite solar cell in the near future.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Inorganic Chemistry and Materials · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. Renewable energy for sustainable development in India: current status, future prospects, challenges, employment, and investment opportunities10.1186/s13705-019-0232-1 ↗
2. Review · 2021 · 1
3. Social, environmental, and economic consequences of integrating renewable energies in the electricity sector: a review10.1007/s10311-023-01587-1 ↗
4. Maka · 2022 · 476
5. Design and simulation numerically with performance enhancement of extremely efficient Sb2Se3-Based solar cell with V2O5 as the hole transport layer, using SCAPS-1D simulation program10.1016/j.optcom.2024.130410 ↗
6. Strain-induced changes in the electronic, optical and mechanical properties of the inorganic cubic halide perovskite Sr3PBr3 with FP-DFT10.1016/j.jpcs.2024.112053 ↗
7. An investigation on strain-incited electronic and optical properties of novel inorganic cubic material Sr3AsCl3
8. Unraveling the strain-induced and spin–orbit coupling effect of novel inorganic halide perovskites of Ca3AsI3 using DFT10.1063/5.0156961 ↗
9. Tuning the optical properties through bandgap engineering in Si-doped YAuPb: ab initio study10.1007/s10825-021-01845-x ↗
10. First-principle insight into structural, electronic, optical and elastic properties of AgXF3 (Cr, Zr) halide perovskite materials for application of reflective coating10.1007/s10904-024-03035-1 ↗
11. New highly efficient perovskite solar cell with power conversion efficiency of 31% based on Ca3NI3 and an effective charge transport layer10.1016/j.optcom.2024.130511 ↗
12. A comparative study of CuO based solar cell with ZnTe HTL and SnS2 ETL using SCAPS 1D simulation10.1007/s12596-024-01800-6 ↗
13. Design and optimization of high-performance novel RbPbBr 3 -based solar cells with wide-band-gap S-chalcogenide electron transport layers (ETLs)10.1021/acsomega.3c08285 ↗
14. “ strain-driven optical, electronic, and mechanical properties of inorganic halide perovskite CsGeBr 3 ,”10.1149/2162-8777/ac56c2 ↗
15. Exploring the impact of strain on the electronic and optical properties of inorganic novel cubic perovskite Sr3PI310.1088/1402-4896/acfce9 ↗
16. Stability, phonon calculations, electronic structure, and optical properties of a VO2(M) nanostructure: a comprehensive density functional theory study
17. Advances in the optical and electronic properties and applications of bismuth-based semiconductor materials10.1039/D3TC03329E ↗
18. A novel investigation into strain-induced changes in the physical properties of lead-free Ca3ncl3 perovskite
19. Impact of A-cations modified on the structural, electronic, optical, mechanical, and solar cell performance of inorganic novel A3NCl3 (A = Ba, Sr, and Ca) perovskites10.1021/acs.energyfuels.4c00525 ↗
20. The importance of moisture in hybrid lead halide perovskite thin film fabrication10.1021/acsnano.5b03626 ↗
21. Assessing the toxicity of Pb- and Sn-based perovskite solar cells in model organism Danio rerio10.1038/srep18721 ↗
22. Ur Jo na l P of
23. Pressure-induced strong ferroelectric polarization in tetra-phase perovskite CsPbBr310.1039/C8CP01338A ↗
24. High-pressure study of perovskite-like organometal halide: band-gap narrowing and structural evolution of [NH3-(ch2)4-NH3]CuCl410.1021/acs.jpclett.6b02786 ↗
25. Size-dependent pressure-response of the photoluminescence of CsPbBr3 nanocrystals10.1021/acs.jpclett.0c00174 ↗
26. Predicting efficiencies >25% A3MX3photovoltaic materials and Cu ion implantation modification10.1063/5.0039936 ↗
27. Investigation of a novel inorganic cubic perovskite Ca3PI3 with unique strain-driven optical, electronic, and mechanical properties10.1002/nano.202300066 ↗
28. Analysis of the role of A-cations in lead-free A3SbI3 (A = Ba, Sr, Ca) perovskite solar cells10.1007/s10853-024-09579-4 ↗
29. Electronic, optical, thermophysical, and mechanical properties of lead-free Ba3SbBr3 perovskite10.1016/j.poly.2024.116937 ↗
30. Structural studies of magnesium nitride fluorides by powder neutron diffraction10.1016/j.jssc.2011.11.008 ↗
31. Norm-conserving pseudopotentials10.1103/PhysRevLett.43.1494 ↗
32. Norm-conserving and ultrasoft pseudopotentials for first-row and transition elements10.1088/0953-8984/6/40/015 ↗
33. Perdew · 1996
34. Tuning the electronic, optical, and thermal properties of cubic perovskites CsPbCl3-nBrn(n = 0, 1, 2, and 3) through altering the halide ratio10.1088/1402-4896/ac6e9a ↗
35. M. K. H. M. R. Islam, A. A. M. Mazumder, M. R. H. Mojumder, A. S. M. Z. Shifat, “Strain-induced tunable optoelectronic properties of inorganic halide perovskites APbCl 3 (A= K, Rb, and Cs),” Phys. B Condens. Matter, vol. 638, doi: 10.1016/j.physb.2022.413960.10.1016/j.physb.2022.413960 ↗
36. Constructing mixed density functionals for describing dissociative chemisorption on metal surfaces: basic principles10.1021/acs.jpca.3c01932 ↗
37. Inorganic novel cubic halide perovskite Sr3AsI3: strain-activated electronic and optical properties10.1016/j.heliyon.2023.e19271 ↗
38. Shanto · 2023
39. Investigation strain effects on the electronic, optical, and output performance of the novel inorganic halide perovskite Sr3SbI3 solar cell10.1016/j.cjph.2024.01.011 ↗
40. Ghosh · 2023
41. Investigating of novel inorganic cubic perovskites of A3BX3 (A=Ca, Sr, B=P, as, X=I, Br) and their photovoltaic performance with efficiency over 2810.1016/j.jallcom.2024.174097 ↗
42. Enhancing solar cell efficiency beyond 27% through the implementation of an efficient charge transport layer utilizing an innovative inorganic perovskite Sr3PI310.1016/j.jpcs.2024.112029 ↗
43. Structural, electronic, optical and thermodynamic properties of AlAuO2 and AlAu094Fe006O2 compounds scrutinized by density functional theory (DFT)10.1016/j.heliyon.2023.e21405 ↗
44. Influence of heavy Hf doping in CeO2: prediction on various physical properties10.1016/j.rinp.2022.105569 ↗
45. Lead-free novel perovskite Ba3AsI3: first-principles insights into its electrical, optical, and mechanical properties10.1016/j.heliyon.2023.e21675 ↗
46. Bonded-atom fragments for describing molecular charge densities10.1007/BF00549096 ↗
47. Tuning band gap and enhancing optical functions of Rb) under pressure for improved optoelectronic applications
48. First-principles calculations to investigate structural, elastic, electronic, thermodynamic, and thermoelectric properties of CaPd3B4O12 (B = Ti, V) perovskites
49. Investigating the physical properties of lead-free halide double perovskites Cs2AgXBr6 (X = P, As, Sb) for photovoltaic and thermoelectric devices using the density functional theory
50. Lead-free double perovskites: a review of the structural, optoelectronic, mechanical, and thermoelectric properties derived from first-principles calculations, and materials design applicable for pedagogical purposes10.3390/cryst14010086 ↗
51. Electronic , optical , thermophysical , and mechanical properties of lead-free
52. Structural, electronic and optical properties of CsMI 3 (M=Ge,Sn,Pb) perovskite from first principles
53. All-inorganic cesium lead halide perovskite nanocrystals for photodetector applications10.1039/C5CC08643D ↗
54. Band gap engineering in halide cubic perovskites CsPbBr3−yIy (y = 0, 1, 2, 3) – a DFT study10.1016/j.mseb.2020.114560 ↗
55. First-principles calculations to investigate elastic, electronic, optical and thermodynamic properties of Pt3X (X = Ti, Cu)10.1016/j.rinp.2022.106141 ↗
56. Investigation of optical and thermoelectric properties of PbTiO3 under pressure
57. First-principles analysis of how Cobalt doping affects the structural, electronic, and optical properties of α-MoO3
58. Electrical, optical and mechanical properties of monolayer MoTe2 for applications in wearable optoelectronic devices
59. Density functional theory investigation of nonlinear optical properties of T-graphene Quantum dots10.1021/acs.jpca.9b10241 ↗
60. DFT study on the electronic structure and optical properties of an Au-deposited α-Fe2O3 (001) surface10.1039/D1RA07933F ↗
61. Piezoelectricity in nominally centrosymmetric phases10.1103/PhysRevResearch.3.043221 ↗
62. The optical and electronic properties of inorganic halide perovskite Sr3NCl3 under applied biaxial strain10.1007/s10853-023-08825-5 ↗
63. Photoconductivity and optical conductivity in lightly doped Nd2CuO4−δ10.1016/0921-4534(92)90051-D ↗
64. Boosting efficiency above 28% using effective charge transport layer with Sr 3 SbI 3 based novel inorganic perovskite10.1039/D3RA06137J ↗
65. Kramers-Kronig relations and sum rules of negative refractive index media10.1140/epjb/e2004-00294-6 ↗
66. The determination of the momentum matrix elements involved in calculating the dielectric constants of superlattices using the tight-binding method10.1016/0038-1098(90)90981-G ↗
67. An in-depth analysis of how strain impacts the electronic, optical, and output performance of the Ca3NI3 novel inorganic halide perovskite10.1016/j.jpcs.2023.111791 ↗
68. Tuning the optical, electronic, and mechanical properties of inorganic Ca3PCl3 perovskite via biaxial strain10.1016/j.jpcs.2023.111722 ↗
69. Alkaline-earth metal effects on physical properties of ferromagnetic AVO3 (A = Ba, Sr, Ca, and Mg): density functional theory insights10.1021/acsomega.2c01630 ↗
70. Self-energy operators and exchange-correlation potentials in semiconductors10.1103/PhysRevB.37.10159 ↗
71. Islam · 2024 · 3
72. Structural, optical, and electronic properties of two quaternary chalcogenide semiconductors: Ag(2)SrSiS(4) and Ag(2)SrGeS(4)10.1021/acs.inorgchem.1c01416 ↗
73. A comparative study of the mechanical stability, electronic, optical and photocatalytic properties of CsPbX(3) (X = Cl, Br, I) by DFT calculations for optoelectronic applications10.1039/D2RA04591E ↗
74. Calculated structural, electronic and elastic properties of M2GeC (M=Ti, V, Cr, Zr, Nb, Mo, Hf, Ta and W)10.1007/s00339-009-5106-5 ↗
75. The effect of pressure upon the elastic parameters of isotropic solids, according to murnaghan's theory of finite strain10.1063/1.1710417 ↗
76. Necessary and sufficient elastic stability conditions in various crystal systems10.1103/PhysRevB.90.224104 ↗
77. Mechanical and electronic properties of Ti2AlN and Ti4AlN3: a first-principles study10.1139/cjp-2013-0746 ↗
78. Theoretical predictions of structure and related properties of intermetallics10.1179/mst.1992.8.4.345 ↗
79. L. Marasamy, A. R. Chaudhry, A. Irfan, A. E. Materials, and S. Cell, “Impact of A - Cations Modified on the Structural, Electronic, Optical, Mechanical, and Solar Cell Performance of Inorganic Novel A 3 NCl 3 (A = Ba, Sr, and Ca) Perovskites,” vol. vol. 3, pp. 0–2.
80. Nb · 2023
81. Boosting efficiency above 30 % of novel inorganic Ba3SbI3 perovskite solar cells with potential ZnS electron transport layer (ETL)
82. Role of facile synthesized V2O5 as hole transport layer for CdS/CdTe heterojunction solar cell: validation of simulation using experimental data
83. Investigation of thin-film p-BaSi2/n-CdS heterostructure towards semiconducting silicide based high efficiency solar cell10.1088/1402-4896/ab49e8 ↗