journal article·2017-05

Doping of semiconductor devices by Laser Thermal Annealing

Karim Huet, Fulvio Mazzamuto, Toshiyuki Tabata, Ines Toqué-Tresonne, Yoshihiro Mori

Publisher page

Abstract

Abstract In today's highly competitive semiconductor industry, and due to the accelerating pace of technology development, the integration of new and disruptive solutions to address process limitations is a mandatory requirement, although most challenging, Doping, i.e. the ability to control material properties locally and by extension local strain engineering, are amongst the key process variables used to overcome device performance issues. With the emergence of three-dimensional (3D) devices and architectures at the nanoscale, new doping schemes which rely on low thermal budgets are being evaluated, especially in the framework of new materials introduction such as germanium (Ge) and III-Vs in front end logic, defect engineered oxides and phase change materials in memory, or silicon carbide (SiC) and gallium nitride (GaN) in power devices. Ultrafast sub-µs annealing schemes with shallow penetration depths providing localized impact, such as Laser Thermal Anneal (LTA), are some of the most promising and scalable approaches being evaluated today. Its production worthiness is already established as process of record for high volume manufacturing of several 3D stacked architectures such as vertical silicon (Si) and SiC power devices and complementary-metal-oxide-semiconductor (CMOS) imaging sensors. This paper reviews recent work highlighting the potential of LTA as an enabler for next generation technologies covering a wide range of applications from Logic to Nano-Electro-Mechanical Systems (NEMS) and 3D sequential integration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. K.Huet, et al., Laser Thermal Annealing: A low thermal budget solution for advanced structures and new materials, Junction Technology (IWJT), 2014 International Workshop on, Shanghai, pp., 1–6, 2014.10.1109/IWJT.2014.6842020 ↗
2. Defect kinetics and dopant activation in submicrosecond laser thermal processes
3. G.Fisicaro, et al., Anomalous impurity segregation and local bonding fluctuation in l-Si, Phys. Rev. Lett. 110 (11), 117801,10.1103/PhysRevLett.110.117801 ↗
4. Y.Qiu et al., Extended defects formation in nanosecond laser-annealed ion implanted silicon, Nano Lett. 14 (4), 1769–177510.1021/nl4042438 ↗
5. F.Cristiano et al., Defect evolution and dopant activation in laser annealed Si and Ge, Mater. Sci. Semicond. Process. 42, 188-19510.1016/j.mssp.2015.09.011 ↗
6. Simulation of the boron build-up formation during melting laser thermal annealing10.1002/pssc.201300156 ↗
7. Advanced extra functionality CMOS-based devices10.1002/pssc.201470035 ↗
8. J.Mitard, et al., First demonstration of 15nm-WFIN inversion-mode relaxed-Germanium n-FinFETs with Si-cap free RMG and NiSiGe Source/Drain," 2014 IEEE International Electron Devices Meeting, San Francisco, CA, pp. 16.5.1–16.5.4, 2014.10.1109/IEDM.2014.7047065 ↗
9. R.R.Lieten et al., Tensile-Strained GeSn Metal–Oxide–Semiconductor Field-Effect Transistor Devices on Si(111) Using Solid Phase Epitaxy, Appl. Phys. Express, 6, 1010.7567/APEX.6.101301 ↗
10. J.Borland, et al., High mobility Ge-channel formation by localized/selective liquid phase epitaxy (LPE) using Ge+B plasma ion implantation and laser melt annealing, Junction Technology (IWJT), 2013 13th International Workshop on, Kyotopp, pp. 49–53, 2013.10.1109/IWJT.2013.6644504 ↗
11. J.O. Borland et al., Liquid Phase Epitaxy (LPE) Formation of Localized High Quality and Mobility Ge & SiGe by High Dose Ge-Implantation with Laser Melt Annealing for 10nm and 7nm Node CMOS Technology, ECS Trans., 64(6), 127–14510.1149/06406.0127ecst ↗
12. J.O. Borland, et al., P, Sb and Sn ion implantation with laser melt-LPC (liquid phase crystallization) for high activation n+ ultra shallow junction in Ge epilayer and surface strain-Ge formation for mobility enhancement, 2015 15th International Workshop on Junction Technology (IWJT), Kyotopp, pp. 15–18, 2015.10.1109/IWJT.2015.7467065 ↗
13. S.Gupta, V.Moroz, L.Smith, Q.Lu, K.C.Saraswat, A group IV solution for 7 nm FinFET CMOS: Stress engineering using Si, Ge and Sn, 2013 IEEE International Electron Devices Meeting, Washington, DC, pp. 26.3.1–26.3.4, 2013.10.1109/IEDM.2013.6724696 ↗
14. GeSn channel n and p MOSFETs10.1149/05009.0937ecst ↗
15. H.Yu, et al., MIS or MS? Source/drain contact scheme evaluation for 7nm Si CMOS technology and beyond, 2016 16th International Workshop on Junction Technology (IWJT), Shanghai, pp. 19–24, 2016.10.1109/IWJT.2016.7486665 ↗
16. H.Yu, et al., 1.5×10−9 Ωcm2 Contact resistivity on highly doped Si:P using Ge pre-amorphization and Ti silicidation, 2015 IEEE International Electron Devices Meeting (IEDM), Washington, DC, pp. 21.7.1–21.7.4, 2015.10.1109/IEDM.2015.7409753 ↗
17. Characterization of epitaxial Si:C:P and Si:P layers for source/drain formation in advanced bulk FinFETs10.1149/06406.0977ecst ↗
18. Selective epitaxial growth of high-P Si:P for source/drain formation in advanced Si nFETs10.1149/07508.0347ecst ↗
19. S.Ray, et al., Highly strained doped Silicon: A novel material for stressor application, The 9th International Conference on Silicon Epitaxy and Heterostructures, p. 27, 2015.
20. H.Tanimura, et al., 10 nm-deep n+/p and p+/n Ge junctions with high activation formed by ion implantation and Flash Lamp Annealing (FLA), 2016 16th International Workshop on Junction Technology (IWJT), Shanghai, pp. 77–80, 2016.10.1109/IWJT.2016.7486678 ↗
21. G.Impellizzeri et al., B-doping in Ge by excimer laser annealing, J. Appl. Phys. 113 (11), 113505,10.1063/1.4795268 ↗
22. R.Milazzo et al., N-type doping of Ge by As implantation and excimer laser annealing, J. Appl. Phys. 115 (5), 053501.10.1063/1.4863779 ↗
23. Defects and dopant activation in laser annealed Si and Ge10.1016/j.mssp.2015.09.011 ↗
24. M.Shayesteh et al., Optimized laser thermal annealing on germanium for high dopant activation and low leakage current, IEEE Trans. Electron Dev. 61 (12), 4047–405510.1109/TED.2014.2364957 ↗
25. S.F.Lombardo, et al., Quantitative modelling of the explosive crystallization phenomenon, to be published in the proceeding of the EMRS Spring meeting, 2016.
26. S.Kerdilès, et al., Dopant activation and crystal recovery in arsenic-implanted ultra-thin silicon-on-insulator structures using 308nm nanosecond laser annealing, 2016 16th International Workshop on Junction Technology (IWJT), Shanghai, pp. 72–75, 2016.10.1109/IWJT.2016.7486677 ↗
27. C.Fenouillet, et al., to be published in S3S conference, 2016.
28. P.Batude, et al., VLSI, 2015.
29. O.Billoint, et al., DATE, 2015.
30. C.Fenouillet, et al., ESSDERC, 2014.
31. C.Fenouillet, et al. IEDM, 2014.
32. L.Pasini, et al., VLSI, 2015.
33. A.Henning, et al., S3S conference, 2013.
34. J. Arcamone et al., IEDM, (2014), pp. 22.1.1-22.1.4
35. Batude · J. Emerg. Sel. Top. Circuits Syst. · 2012 · 2 · 71410.1109/JETCAS.2012.2223593 ↗
36. I.Ouerghi, et al., High performance polysilicon NEMS fabricated at low temperature with UV laser annealing, 2016 IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS), Shanghai, pp. 63–66, 2016.10.1109/MEMSYS.2016.7421558 ↗
37. James · Appl. Phys. Lett. · 1993 · 63 · 196910.1063/1.110617 ↗
38. Mile · Nanotechnology · 2010 · 21 · 1610.1088/0957-4484/21/16/165504 ↗
39. Gutt, et al., Laser Thermal Annealing for Power Field Effect Transistor by using Deep Melt Activation, 2006 14th IEEE International Conference on Advanced Thermal Processing of Semiconductors, Kyoto, pp. 193–197, 2006.10.1109/RTP.2006.367999 ↗
40. Tabata et al., UV Excimer Laser Annealing for Next Generation Power Electronics, 2016 20th International Conference on Ion Implantation Technology (IIT), 2016.10.1109/IIT.2016.7882917 ↗
41. Ukawa · Jpn. J. Appl. Phys. · 2010 · 49 · 07650310.1143/JJAP.49.076503 ↗
42. Gupta · J. Mater. Sci. · 2011 · 46 · 19610.1007/s10853-010-4920-7 ↗
43. M. Rahimo et al., Thin-Wafer Silicon IGBT With Advanced Laser Annealing and Sintering Process, in IEEE Electron Device Letters, vol. 33, no. 11, pp. 1601-1603, Nov. 201210.1109/LED.2012.2215304 ↗
44. Dutto · Appl. Surf. Sci. · 2003 · 208–209 · 29210.1016/S0169-4332(02)01357-0 ↗
45. Mazzamuto · 2016 · 858
46. Tsvetkov · Inst. Phys. Conf. Ser. · 1996 · 142 · 17
47. Excimer laser crystallization of amorphous silicon carbide produced by ion implantation10.1016/S0169-4332(02)01071-1 ↗
48. Effects of 248 nm excimer laser irradiation on the properties of Mg-doped GaN10.1016/j.apsusc.2005.03.195 ↗
49. Pulsed laser annealing of Be-implanted GaN10.1063/1.2120893 ↗
50. Synthesis of GaN x As 1-x thin films by pulsed laser melting and rapid thermal annealing of N+-implanted GaAs10.1063/1.1582393 ↗
51. Ohmic contact formation mechanism of Ni on n-type 4H–SiC
52. R.Rupp, et al., 25th ISPSD, IEEE, 2013.
53. Mazzamuto · 2016 · 858
54. Reduced contact resistance and improved surface morphology of Ohmic contacts on GaN employing KrF laser irradiation10.7567/JJAP.50.04DF06 ↗