Structure, optical properties, and ionizing radiation shielding performance using Monte Carlo simulation for lead-free BTO perovskite ceramics doped with ZnO, SiO2, and WO3 oxides
Source abstract
Abstract
This study reports the influence of different oxides doping on the structure, optical characteristics, and radiation protecting performances of perovskite BaTiO 3 (BT used thereafter) ceramic synthesized by solid-state reaction process. The crystal structure and phase identification are examined through X-ray diffraction technique (XRD) and Rietveld refinement analyses that confirm a monophasic tetragonal structure with a P4mm space group in BT ceramic. The tetragonality is maintained with ZnO doping, however, for ceramics doped with WO 3 and SiO 2 , a cubic structure is detected with the presence of some impurities. The variation in the structural parameters is indicative of the distortion in the unit cell under the influence of different oxides doping. The optical properties reveal a variation in optical bandgap under the effect doping. The values of E g follow the order of BT: Zn < BT < BT: W < BT: Si. BT doped with SiO 2 exhibits a wider bandgap energy (3.41 eV) compared to all prepared ceramics. The radiation shielding studies were examined using Monte Carlo simulation. The linear attenuation coefficient (μ) values for BaTiO 3 are 1.238, 0.453, and 0.297 cm −1 for photons with energies 0.244, 0.662, and 1.332 MeV, respectively, and these values were increased gradually with the addition of ZnO or WO 3 metal oxides. In contrast, the addition of SiO 2 compounds to the basic composition BT causes a reduction in both the density and shielding capacity of the fabricated BT. The half-value thickness (Δ 0.5) was evaluated and the results demonstrated that the Δ 0.5 increases between 0.560 and 2.399 cm (for BT ceramics), 0.555–2.370 cm (for BT: Zn), 0.528–2.293 cm (BT: W), and 0.609–2.619 cm (for BT: Si ceramics) when the γ-ray energy raised between 0.244 and 1.408 MeV, respectively. Also, the addition of ZnO and WO 3 slightly enhance the Δ 0.5 values by a factor of 1.142% and 4.532%. On the other hand, the addition of the SiO 2 compound to BaTiO 3 increases the Δ 0.5 value by a factor of 9.16%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear materials and radiation effects · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Estimation of patients' organ doses and conceptus doses from selected X-ray examinations in two Nigeria X-ray centres10.1093/rpd/ncn317 ↗
2. Study of comprehensive shielding behaviors of chambersite deposit for neutron and gamma ray10.1016/j.pnucene.2022.104155 ↗
3. Application of ionizing radiation in wastewater treatment: an overview
4. He+ induced changes in the surface structure and optical properties of RF-sputtered amorphous alumina thin films10.1016/j.jnoncrysol.2015.10.026 ↗
5. Synthesis and study of structural, optical and radiation-protective peculiarities of MTiO3 (M= Ba, Sr) metatitanate ceramics mixed with SnO2 oxide10.1016/j.ceramint.2021.07.010 ↗
6. Structural and radiation shielding properties of BaTiO3 ceramic with different concentrations of Bismuth and Ytterbium10.1016/j.ceramint.2020.08.055 ↗
7. Determination of structural features of different Perovskite ceramics and investigation of ionizing radiation shielding properties10.1007/s10854-021-06603-0 ↗
8. The overview of the electrical properties of barium titanate
9. Khomskii · 2009
10. Spaldin. "Multiferroics: progress and prospects in thin films
11. Eco-friendly processing and methods for ceramic materials-A review10.2109/jcersj2.116.1175 ↗
12. Ghulam Yasin, Abdulhadi Baykal, Bekir Ozcelik, and Ismail Ercan. "(BaTiO3) 1‐x+(Co0. 5Ni0. 5Nb0. 06Fe1.94O4)x nanocomposites: structure, morphology, magnetic and dielectric properties10.1111/jace.17931 ↗
13. Investigation of structural, morphological, optical, magnetic and dielectric properties of (1-x) BaTiO3/xSr0. 92Ca0. 04Mg0. 04Fe12O19 composites10.1016/j.jmmm.2020.166933 ↗
14. Correlation between structure, dielectric and multiferroic properties of lead free Ni modified BaTiO3 solid solution10.1016/j.ceramint.2020.07.219 ↗
15. Phase formation, microstructure, electrical and magnetic properties of Mn substituted barium titanate10.1016/j.ceramint.2015.07.023 ↗
16. Influence of compositional variation on structural, electrical and magnetic characteristics of (Ba1− xGd)(Ti1− xFex) O3 (0.2≤ x≤ 0.5)10.1088/2053-1591/aa9efb ↗
17. Effect of manganese doping on the grain size and transition temperature of barium titanate ceramics
18. Preparation of small‐grained and large‐grained ceramics from Nb‐doped BaTiO310.1111/j.1151-2916.1971.tb12383.x ↗
19. Enhanced dielectric properties of BaTiO3 ceramics with cerium doping, manganese doping and Ce-Mn co-doping10.1515/secm-2017-0177 ↗
20. Effect of ZnO on the microstructure and dielectric properties of BaTiO3 ceramic coatings prepared by plasma spraying10.1016/j.jallcom.2017.08.175 ↗
21. Investigations on the liquid phase in barium titanate ceramics with silica additives10.1016/S0955-2219(01)00086-3 ↗
22. Study on dielectric properties of SiO2-doped BaTiO3 ceramics10.1080/00150193.2015.1071594 ↗
23. Role of WO 3 nanoparticles in electrical and dielectric properties of BaTiO 3–SrTiO 3 ceramics10.1007/s10854-020-03317-7 ↗
24. Comparative assessment of tungsten toxicity in the absence or presence of other metals10.3390/toxics6040066 ↗
25. Development and characterization of new tungsten and tantalum containing composites for radiation shielding in medicine10.1016/j.nimb.2020.01.027 ↗
26. Briesmeister · 2000 · vol. 2
27. Multiferroic iron doped BaTiO3 nanoceramics synthesized by sol-gel auto combustion: influence of iron on physical properties10.1016/j.ceramint.2016.05.021 ↗
28. Evolution of the structure, dielectric and ferroelectric properties of Na0.5Bi0.5TiO3-added BaTiO3–Bi (Mg2/3Nb1/3)O3 ceramics10.1016/j.ceramint.2020.07.007 ↗
29. Formability of ABO3 perovskites10.1016/j.jallcom.2003.10.017 ↗
30. Phase stability and ionic conductivity in substituted La2W2O910.1016/j.jssc.2007.11.024 ↗
31. Effect of BaWO4 on microstructure microwave dielectric properties of Ba (Mg1/3Nb2/3)O310.1016/j.matchemphys.2004.04.002 ↗
32. Structure and dielectric characteristics of Ba1-xCaxTi1-xCaxO3-δ ceramics10.1016/j.ceramint.2019.09.072 ↗
33. Effects of site substitutions and concentration on the structural, optical and visible photoluminescence properties of Er doped BaTiO3 thin films prepared by RF magnetron sputtering10.1016/j.optmat.2015.04.036 ↗
34. Investigation of structural, morphological and optical characteristics of Mn substituted Al-doped ZnO NPs: a Urbach energy and Kramers-Kronig study10.1016/j.ijleo.2020.164227 ↗
35. Effect of (Mn-Co) co-doping on the structural, morphological, optical, photoluminescence and electrical properties of SnO210.1016/j.jallcom.2017.05.293 ↗
36. Quantum confinement effects and band gap engineering of SnO2 nanocrystals in a MgO matrix10.1016/j.actamat.2011.11.012 ↗
37. Studies of ionizing radiation shielding effectiveness of silica-based commercial glasses used in Bangladeshi dwellings10.1016/j.rinp.2018.02.075 ↗
38. Highly cost-effective shielding composite made from vanadium slag and boron-rich slag and its properties10.1016/j.radphyschem.2017.07.023 ↗
39. Impact of Bi2O3 modifier concentration on barium–zincborate glasses: physical, structural, elastic, and radiation-shielding properties10.1140/epjp/s13360-020-01056-6 ↗
40. Analysis of borosilicate glasses doped with heavy metal oxides for gamma radiation shielding application using Geant4 simulation code10.1016/j.ceramint.2019.08.234 ↗