Direct and quantitative study of ceria–SiO2 interaction depending on Ce3+ concentration for chemical mechanical planarization (CMP) cleaning
Source abstract
Abstract
Abstract The importance of chemical mechanical planarization (CMP) and post-CMP cleaning is highly critical because both directly affect the yields and performance of semiconductor devices. Ceria nanoparticles are widely used as abrasives for SiO2 CMP because strong ceria–SiO2 interaction enhances CMP performance. However, the interaction is a major drawback in post-CMP cleaning processes where residual ceria nanoparticles must be completely removed from the SiO2 surface. The interaction depends on the cerium oxidation state of the ceria nanoparticles surface. In this study, the ceria–SiO2 interaction was investigated systemically using an atomic force microscope and a quartz crystal microbalance. The analysis revealed that the adhesion energy between ceria and SiO2 and the adsorption rate of ceria nanoparticles on a SiO2 surface increased with the surface concentration of Ce3+. This is direct evidence showing that the ceria–SiO2 interaction becomes stronger as the surface Ce3+ concentration of ceria nanoparticles increases, suggesting that the surface Ce3+ concentration should be reduced for effective post-CMP cleaning.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Minerals Flotation and Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Beyond the conventional transistor10.1016/j.sse.2004.10.014 ↗
2. Enhanced open innovation: CMP innovation to open new paradigm10.1149/2.0161905jss ↗
3. Ammonium persulfate and potassium oleate containing silica dispersions for chemical mechanical polishing for cobalt interconnect applications10.1149/2.0021905jss ↗
4. J.D. Plummer, Silicon VLSI Technology: Fundamentals, Practice and Modeling, Dorling Kindersley2009.
5. S. Babu, Advances in Chemical Mechanical Planarization (CMP), Woodhead Publishing2016.
6. Steigerwald · 1997
7. Yerriboina · 2019
8. Converting ceria polyhedral nanoparticles into single-crystal nanospheres10.1126/science.1125767 ↗
9. Chemical mechanical planarization for microelectronics applications10.1016/j.mser.2004.06.002 ↗
10. Silica nano-particle anneal treatment and its effect on chemical mechanical polishing10.1007/s42835-018-00002-y ↗
11. Nojo · 1996 · 349
12. Development of a copper chemical mechanical polishing slurry at neutral pH based on ceria slurry10.1149/1.3473801 ↗
13. Highly selective chemical mechanical polishing of Si3N4 over SiO2 using advanced silica abrasive10.7567/JJAP.56.056501 ↗
14. shallow trench isolation chemical mechanical planarization: a Review10.1149/2.0071511jss ↗
15. Effect of organic additives on ceria slurry in shallow trench isolation chemical mechanical planarization10.1143/JJAP.44.5949 ↗
16. Effect of lanthanum doping in ceria abrasives on chemical mechanical polishing selectivity for shallow trench isolation10.1016/j.mssp.2015.01.049 ↗
17. Effects of abrasive particle size and molecular weight of poly(acrylic acid) in ceria slurry on removal selectivity of SiO2/Si3N4 films in shallow trench isolation chemical mechanical planarization10.1557/jmr.2007.0097 ↗
18. Cerium oxide slurries in CMP. Electrophoretic mobility and adsorption investigations of ceria/silicate interaction10.1149/1.1785793 ↗
19. Post cleaning for FEOL CMP with silica and ceria slurries10.1149/2.0101710jss ↗
20. Almost complete removal of ceria particles down to 10 nm size from silicon dioxide surfaces10.1149/2.0131805jss ↗
21. Role of the oxidation state of cerium on the ceria surfaces for silicate adsorption10.1016/j.apsusc.2016.06.193 ↗
22. Increase in Ce3+ concentration of ceria nanoparticles for high removal rate of SiO2 in chemical mechanical planarization10.1149/2.0371709jss ↗
23. AFM-based study of the interaction forces between ceria, silicon dioxide and polyurethane pad during non-prestonian polishing of silicon dioxide films10.1149/2.0031511jss ↗
24. Control of adhesion force between ceria particles and polishing pad in shallow trench isolation chemical mechanical planarization10.1166/jnn.2014.8241 ↗
25. Attachment of nanoparticles to the AFM tips for direct measurements of interaction between a single nanoparticle and surfaces10.1016/j.jcis.2007.02.010 ↗
26. An investigation of the deposition of ceria on silica by quartz crystal microbalance: observations on the effect of many body interactions10.1016/j.colsurfa.2017.02.081 ↗
27. Improving the surface properties of CeO2 by dissolution of Ce3+ to enhance the performance for catalytic wet air oxidation of phenol10.1021/acs.iecr.7b02121 ↗
28. Electrodeposition of cerium oxide films and composites10.1016/j.surfcoat.2011.06.029 ↗
29. Cerium oxidation state in ceria nanoparticles studied with X-ray photoelectron spectroscopy and absorption near edge spectroscopy10.1016/j.susc.2004.05.138 ↗
30. Superoxide dismutase mimetic properties exhibited by vacancy engineered ceria nanoparticles10.1039/b615134e ↗
31. UV and visible Raman studies of oxygen vacancies in rare-earth-doped ceria10.1021/la200292f ↗
32. Growth of native oxide on a silicon surface10.1063/1.347181 ↗
33. Zur theorie der sogenannten adsorption geloster stoffe, Kungliga svenska vetenskapsakademiens
34. On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kinetics10.1016/j.cej.2016.04.079 ↗