Processing and machining mechanism of ultrasonic vibration-assisted grinding on sapphire
Source abstract
Abstract
Owing to outstanding mechanical, optical, thermal stability and chemical stability properties, sapphire has widespread use in semiconductors, aerospace and other fields. However, it is difficult to machine it efficiently and precisely because of its brittleness and hardness. In this work, the processing and mechanism of machining sapphire using ultrasonic vibration-assisted grinding technology have been investigated via experiment. The machining factors have been analyzed, including the condition of machined surface, specific grinding energy, force and force ratio. Referring to conventional grinding, the application of ultrasonic vibration reduces the force, force ratio, specific energy, and the reduction ratio is direction dependent. The effect on surface roughness and morphology is also anisotropic. Regarding the smoothness of the surface, the suitable directions were axial and tangential, while there was no noticeable improvement in the radial direction. Our results and insights could be beneficial for the precise machining of brittle materials and quality management.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Sapphire shaped crystals for waveguiding, sensing and exposure applications[J]10.1016/j.pcrysgrow.2018.10.002 ↗
2. Chemical mechanical polishing (CMP) anisotropy in sapphire[J]10.1016/j.apsusc.2004.04.027 ↗
3. Static and dynamic indentation response of basal and prism plane sapphire[J]10.1016/j.jeurceramsoc.2011.03.006 ↗
4. Dobvinskaya · 2013
5. Stress evolution in AlN and GaN grown on Si(111): experiments and theoretical modeling[J]10.1007/s10854-015-3984-1 ↗
6. Massively engineering the wettability of titanium by tuning nanostructures and roughness via laser ablation[J]10.1021/acs.jpcc.9b08580 ↗
7. Properties of AlN film grown on Si (111) [J]10.1016/j.jcrysgro.2015.11.016 ↗
8. Material removal mechanism of sapphire substrates with four crystal orientations by double-sided planetary grinding [J]10.1016/j.ceramint.2019.11.284 ↗
9. Science and art of ductile grinding of brittle solids [J]10.1016/j.ijmachtools.2020.103675 ↗
10. Ultrasonic vibration-assisted scratch-induced characteristics of C-plane; sapphire with a spherical indenter[J]10.1016/j.ijmachtools.2012.07.009 ↗
11. Experimental study on brittle–ductile transition in elliptical ultrasonic assisted grinding (EUAG) of monocrystal sapphire using single diamond abrasive grain [J]10.1016/j.ijmachtools.2013.04.004 ↗
12. An investigation on wear mechanism of resin-bonded diamond wheel in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire[J]10.1016/j.jmatprotec.2011.11.009 ↗
13. A feasibility study on elliptical ultrasonic assisted grinding of sapphire substrate[J]10.1504/IJAT.2010.034050 ↗
14. Experimental investigations of elliptical ultrasonic assisted grinding (EUAG) of monocrystal sapphire[J]10.1504/IJAT.2011.044502 ↗
15. Wang QY, Zhao WX, Liang ZQ,et al. Investigation of diamond wheel topography in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire using fractal analysis method[J]. Ultrasonics, 84: 87-95. 10.1016/j.ultras.2017.10.012.10.1016/j.ultras.2017.10.012 ↗
16. Rotary ultrasonic machining of sapphire: feasibility study and designed experiments[J]10.4028/www.scientific.net/KEM.602-603.523 ↗
17. Effect of ultrasonic elliptical vibration assistance on the surface layer defect of M-plane sapphire in microcutting [J]10.1016/j.matdes.2020.108755 ↗
18. Investigation on surface formation mechanism in elliptical ultrasonic assisted grinding (EUAG) of monocrystal sapphire based on fractal analysis method [J]10.1007/s00170-016-8700-7 ↗
19. Energy aspects and workpiece surface characteristics in ultrasonic-assisted cylindrical grinding of alumina–zirconia ceramics[J]10.1016/j.ijmachtools.2014.12.002 ↗
20. Energy aspects and workpiece surface characteristics in ultrasonic-assisted cylindrical grinding of alumina–zirconia ceramics[J]10.1016/j.ijmachtools.2014.12.002 ↗
21. Ultrasonic vibration mill-grinding of single-crystal silicon carbide for pressure sensor diaphragms[J]10.1016/j.ceramint.2017.11.077 ↗
22. Material removal behaviour in axial ultrasonic assisted scratching of Zerodur and ULE with a Vickers indenter [J]10.1016/j.ceramint.2020.02.262 ↗
23. Technological experiment and regression analysis of surface residual stress in ultrasonic grinding[J]
24. Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics[J]10.1016/j.ceramint.2016.11.066 ↗
25. Thermo-mechanical coupling effect on surface residual stress during ultrasonic vibration-assisted forming grinding gear [J]10.1016/j.jmapro.2020.09.041 ↗
26. A study on ultrasonic assisted creep feed grinding of nickel based superalloys[J]10.1016/j.procir.2012.04.064 ↗
27. Study on effectiveness of plane grinding parameters based ontangential[J]
28. Effect of radial high-speed ultrasonic vibration cutting on machining performance during finish turning of hardened steel[J]10.1016/j.ultras.2020.106340 ↗
29. Study on wear of diamond wheel in ultrasonic vibration-assisted grinding ceramic [J]
30. Deformation anisotropy of nano-scratching on C-plane of sapphire: a molecular dynamics study and experiment [J]10.1016/j.apsusc.2021.149091 ↗
31. Investigation of the cutting mechanisms and the anisotropic ductility of monocrystalline sapphire [J]10.1016/j.cirp.2017.04.018 ↗
32. Anisotropic brittle-ductile transition of monocrystalline sapphire during orthogonalcutting and nanoindentation experiments [J]10.1016/j.npe.2018.09.005 ↗
33. Green manufacturing with a bionic surface structured grinding wheel-specific energy analysis [J]
34. Kinematics analysis on ultra-sonic vibration grinding[J]
35. Study on characteristics of axial ultrasonic assisted grinding of sapphire with different crystal surfaces[J]