journal article·2019-05

Spirobifluorene based small molecules as an alternative to traditional fullerene acceptors for organic solar cells

Muhammad Ans, Javed Iqbal, Khurshid Ayub, Ehsan Ali, Bertil Eliasson

Publisher page

Abstract

Abstract Four new three-dimensional (3D) acceptor-acceptor-donor (A-A-D) type of small molecule acceptors (M1, M2, M3 and M4) were designed for better optoelectronic properties in organic solar cells. These molecules contain spirobifluorene as a 3D core unit, flanked with 2,1,3- benzothiadiazole (BT) units linked with the end-capped acceptor groups 2-(4-oxo-4,5-dihydrocyclopenta-b-thiophene-6-ylidene)malononitrile (M1), 2-(3-oxo-2,3-dihydro-1H-indene-1-indene-1-ylidene)malononitrile (M2), 2-(5,6-difluoro-3-oxo-2,3-dihydroindene-1-ylidene)malononitrile (M3) and 2-(5,6-dimethyl-3-oxo-2,3-dihydroindene-1-ylidene)malononitrile (M4). The optoelectronic properties of M1-M4 were compared with the well-known reference molecule R, which has the same central BT-spirobifluorene-BT structure as M1-M4 but is end-capped with the 2-(2-dicyanomethylene)-3-ethyl-4-oxo-thiazolidin-5-ylidenemethyl group. Among these molecules, M3 has the most appropriate frontier molecular orbital diagram for optoelectronic properties as deduced from MPW1PW91 calculations and also shows the maximum absorption peak at longest wavelength (569 nm) by TD-MPW1PW91 calculations with a polarizable continuum model for chloroform solution. These properties are due to the strong electron-withdrawing end-capped acceptor group which causes a red shift in the absorption spectrum. Computed reorganization energies indicate that the electron mobilities for M1-M4 are higher compared to that of reference R.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Fullerene Chemistry and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Quantum chemical study in the direction to design efficient donor-bridge-acceptor triphenylamine sensitizers with improved electron injection10.1007/s00894-012-1488-y ↗
2. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
3. Highly efficient ternary polymer solar cells by optimizing photon harvesting and charge carrier transport10.1016/j.nanoen.2016.02.032 ↗
4. Polymer solar cells10.1038/nphoton.2012.11 ↗
5. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
6. Diluting concentrated solution: a general, simple and effective approach to enhance efficiency of polymer solar cells10.1039/C5EE01838B ↗
7. A two-step strategy to clarify the roles of a solution processed PFN interfacial layer in highly efficient polymer solar cells10.1039/C5TA05117G ↗
8. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
9. Highly efficient organic solar cells based on a robust room-temperature solution-processed copper iodide hole transporter10.1016/j.nanoen.2015.07.018 ↗
10. Low-temperature solution-processed flexible organic solar cells with PFN/AgNWs cathode10.1016/j.nanoen.2015.06.013 ↗
11. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
12. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
13. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
14. Nematic liquid crystal materials as a morphology regulator for ternary small molecule solar cells with power conversion efficiency exceeding 10%10.1039/C7TA00211D ↗
15. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
16. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
17. Imide-and amide-functionalized polymer semiconductors10.1021/cr500225d ↗
18. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
19. Fine-tuned photoactive and interconnection layers for achieving over 13% efficiency in a fullerene-free tandem organic solar cell10.1021/jacs.7b01493 ↗
20. Slip-stacked perylenediimides as an alternative strategy for high efficiency nonfullerene acceptors in organic photovoltaics10.1021/ja508814z ↗
21. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
22. Efficient ternary polymer solar cells with two well‐compatible donors and one ultranarrow bandgap nonfullerene acceptor10.1002/aenm.201702854 ↗
23. Covalently bound clusters of alpha-substituted PDI rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
24. A tetraphenylethylene core‐based 3D structure small molecular acceptor enabling efficient non‐fullerene organic solar cells10.1002/adma.201404152 ↗
25. A three‐dimensional non‐fullerene small molecule acceptor for solution‐processed organic solar cells10.1002/cjoc.201700399 ↗
26. Semitransparent ternary nonfullerene polymer solar cells exhibiting 9.40% efficiency and 24.6% average visible transmittance10.1016/j.nanoen.2018.11.010 ↗
27. Ternary nonfullerene polymer solar cells with efficiency> 13.7% by integrating the advantages of materials and two binary cells10.1039/C8EE01107A ↗
28. Efficient nonfullerene polymer solar cells enabled by a novel wide bandgap small molecular acceptor10.1002/adma.201606054 ↗
29. M. Frisch, G. Trucks, H. Schlegel, G. Scuseria, M. Robb, J. Cheeseman, G. Scalmani, V. Barone, B. Mennucci, G. Petersson, Gaussian 09, revision D. 01, Gaussian, Inc., Wallingford CT, 2009.
30. Dennington · 2008
31. B3LYP augmented with an empirical dispersion term (B3LYP-D*) as applied to molecular crystals10.1039/B715018K ↗
32. A new hybrid exchange–correlation functional using the Coulomb-attenuating method (CAM-B3LYP)10.1016/j.cplett.2004.06.011 ↗
33. Exchange functionals with improved long-range behavior and adiabatic connection methods without adjustable parameters: the m PW and m PW1PW models10.1063/1.475428 ↗
34. Long-range corrected hybrid density functionals with damped atom–atom dispersion corrections10.1039/b810189b ↗
35. Performance of M06, M06−2X, and M06-HF density functionals for conformationally flexible anionic clusters: M06 functionals perform better than B3LYP for a model system with dispersion and ionic hydrogen-bonding interactions10.1021/jp408166m ↗
36. Ab initio study of ionic solutions by a polarizable continuum dielectric model10.1016/S0009-2614(98)00106-7 ↗
37. Yu · 2010
38. A.L. Tenderholt, PyMOlyze: A Program to Analyze Quantum Chemistry Calculations, Version 2.0.
39. Opto-electronic properties of non-fullerene fused-undecacyclic electron acceptors for organic solar cells10.1016/j.commatsci.2018.12.009 ↗
40. Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5%10.1039/C8EE00215K ↗
41. Fullerene‐free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
42. P3HT: PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
43. Designing three‐dimensional (3D) non‐fullerene small molecule acceptors with efficient photovoltaic parameters10.1002/slct.201802732 ↗
44. Evaluation of acceptor strength in thiophene coupled donor–acceptor chromophores for optimal design of organic photovoltaic materials10.1021/jp309950f ↗
45. Excitons in organic semiconductors10.1016/j.synthmet.2011.04.003 ↗
46. Organic dye design tools for efficient photocurrent generation in dye‐sensitized solar cells: exciton binding energy and electron acceptors10.1002/adfm.201101961 ↗
47. Why is exciton dissociation so efficient at the interface between a conjugated polymer and an electron acceptor?10.1063/1.1586456 ↗
48. Dipole assisted exciton dissociation at conjugated polymer/fullerene photovoltaic interfaces: a molecular study using density functional theory calculations10.1016/j.synthmet.2009.12.026 ↗
49. Positional disorder enhancement of exciton dissociation at donor∕ acceptor interface10.1063/1.2174118 ↗
50. Calculating the efficiency of exciton dissociation at the interface between a conjugated polymer and an electron acceptor10.1021/jz300123k ↗