A review of ultra-short pulse laser micromachining of wide bandgap semiconductor materials: SiC and GaN
Source abstract
Abstract
Wide bandgap (WBG) materials have excellent semiconductor and physicochemical properties and are emerging materials. Silicon carbide (SiC) and gallium nitride (GaN), two representatives of third-generation semiconductor materials, can be used in high temperature, high voltage, high frequency, and high power applications. However, both materials are difficult to machine due to their brittle and hard properties. Laser processing is a suitable processing method, and in particular the unique non-thermal properties of ultra-short pulse laser processing have led to a wide range of applications in a variety of materials including ceramics, metals and biological tissues. WBG materials are third-generation semiconductor materials with broad application prospects in the semiconductor industry, but there are relatively few summarized studies on ultrashort laser processing of WBG materials. With this background, this paper reviews the application of ultra-short pulse lasers for the processing of two WBG materials, SiC and GaN. Laser-assisted processing, laser fabrication of microstructures and laser processing of difficult and complex parts are the three main components of ultrashort laser processing of SiC. Ultra-short laser processing of GaN, on the other hand, focuses mainly on laser lift-off and is used less for fabricating microstructures. Physical mechanisms of laser removal of semiconductor materials are summarized. Then, based on the classification of the pulse width, the applications of two types of ultrafast lasers, picosecond and femtosecond, for processing SiC and GaN materials are summarized. Finally, the paper concludes and discusses the existing ultrafast laser processing techniques for SiC and GaN materials and future perspectives.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Diamond and Carbon-based Materials Research · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Role of wide bandgap materials in power electronics for smart grids applications10.3390/electronics10060677 ↗
2. In-volume laser direct writing of silicon—challenges and opportunities
3. Characterization and control of laser induced modification inside silicon10.2351/1.5096086 ↗
4. In-chip microstructures and photonic devices fabricated by nonlinear laser lithography deep inside silicon10.1038/s41566-017-0004-4 ↗
5. Internal modification of intrinsic and doped silicon using infrared nanosecond laser10.1007/s00339-016-0540-7 ↗
6. Direct observation and quantification of nanosecond laser induced amorphization inside silicon10.2351/7.0001305 ↗
7. Limitations to laser machining of silicon using femtosecond micro-Bessel beams in the infrared10.1063/1.4918669 ↗
8. Curved waveguides in silicon written by a shaped laser beam
9. Positive- and negative-tone structuring of crystalline silicon by laser-assisted chemical etching10.1364/OL.44.001619 ↗
10. Material removal mechanism and crack propagation in single scratch and double scratch tests of single-crystal silicon carbide by abrasives on wire saw10.1016/j.ceramint.2018.09.178 ↗
11. Hybrid anodic and metal-assisted chemical etching method enabling fabrication of silicon carbide nanowires
12. Ultrasonic vibration mill-grinding of single-crystal silicon carbide for pressure sensor diaphragms10.1016/j.ceramint.2017.11.077 ↗
13. Application of femtosecond laser micromachining in silicon carbide deep etching for fabricating sensitive diaphragm of high temperature pressure sensor10.1016/j.sna.2020.112017 ↗
14. Synthesis, optical properties and residual strain effect of GaN nanowires generated via metal-assisted photochemical electroless etching10.1039/C7RA02348K ↗
15. Fabrication and evaluation of GaN negative and bifocal microlenses10.1063/1.1857062 ↗
16. Ultrashort pulse laser lift-off processing of inGaN/GaN light-emitting diode chips10.1021/acsaelm.0c00913 ↗
17. Modeling and optimizing femtosecond laser process parameters for high-efficient and near damage-free micromachining of single-crystal GaN substrate10.1016/j.mssp.2022.107123 ↗
18. Status of silicon carbide (SiC) as a WideBandgap semiconductor for HighTemperature applications: a review
19. 2 - SiC material properties
20. Low damage electrical modification of 4H-SiC via ultrafast laser irradiation10.1063/1.5020445 ↗
21. Anisotropic charge transport enabling high-throughput and high-aspect-ratio wet etching of silicon carbide
22. High-quality micro-shape fabrication of monocrystalline diamond by nanosecond pulsed laser and acid cleaning10.1088/2631-7990/ac5a6a ↗
23. Pulsed laser ablation and micromachining of 4H and 6H SiC wafers for high-temperature MEMS sensors
24. Pulsed laser activation and electroless metallization of SiC single crystal
25. Laser processing of wide bandgap semiconductors and insulatorsCryst. Lattice defects amorphous mater, lattice defects amorphous
26. Temperature dependence of the performance of ultraviolet detectors10.1016/S0168-9002(03)01558-4 ↗
27. Ultrafast laser micromachining of 3C-SiC thin films for MEMS device fabrication10.1007/s00170-007-1223-5 ↗
28. Laser micro machining of 3C–SiC single crystals10.1016/j.mee.2006.01.064 ↗
29. ArF excimer laser micromachining of Pyrex, SiC and PZT for rapid prototyping of MEMS components10.1016/j.sna.2007.01.002 ↗
30. Free and bound excitons in thin wurtzite GaN layers on sapphire10.1088/0268-1242/11/5/010 ↗
31. HVPE-GaN growth on ammonothermal GaN crystals
32. Influence of substrate quality on structural properties of AlGaN/GaN superlattices grown by molecular beam epitaxy10.1063/1.4866718 ↗
33. GaN, AlN, and InN: a review10.1116/1.585897 ↗
34. Improvement of resolution in nano-fabrication of GaN by wet-chemical-assisted femtosencond laser ablation10.2961/jlmn.2010.01.0005 ↗
35. A review of dry etching of GaN and related materials10.1557/S1092578300000119 ↗
36. Wet etching of GaN, AlN, and SiC: a review, materials science and engineering: r
37. Fabrication of hexagonal microstructure on gallium nitride films by wet etching assisted femtosecond laser ablation10.1016/j.optcom.2022.128952 ↗
38. Ablation and etching of polymethylmethacrylate by very short (160 fs) ultraviolet (308 nm) laser pulses10.1063/1.99001 ↗
39. Femtosecond uv excimer laser ablation10.1007/BF00692122 ↗
40. Femtosecond laser micromachining in transparent materials10.1038/nphoton.2008.47 ↗
41. Ultrafast lasers—reliable tools for advanced materials processing10.1038/lsa.2014.30 ↗
42. Research status of femtosecond lasers and nanosecond lasers processing on bulk metallic glasses (BMGs)10.1016/j.optlastec.2023.109812 ↗
43. Functional regeneration after laser axotomy10.1038/432822a ↗
44. Ablation and cutting of planar silicon devices using femtosecond laser pulses10.1007/s00339-003-2118-4 ↗
45. Short-pulse laser ablation of solid targets10.1016/0030-4018(96)00250-7 ↗
46. Non-thermal melting in semiconductors measured at femtosecond resolution10.1038/35065045 ↗
47. Femtosecond structural transformation of phase-change materials far from equilibrium monitored by coherent phonons10.1038/ncomms9367 ↗
48. Kinetics of high-density plasmas generated in Si by 1.06- and 0.53- microm picosecond laser pulses10.1103/PhysRevB.35.8166 ↗
49. Electronic transport and consequences for material removal in ultrafast pulsed laser ablation of materials10.1103/PhysRevB.69.054102 ↗
50. Nanosecond-to-femtosecond laser-induced breakdown in dielectrics10.1103/PhysRevB.53.1749 ↗
51. Transient states of matter during short pulse laser ablation10.1103/PhysRevLett.81.224 ↗
52. Experimental evidence of new tetragonal polymorphs of silicon formed through ultrafast laser-induced confined microexplosion10.1038/ncomms8555 ↗
53. Direct femtosecond laser surface nano/microstructuring and its applications10.1002/lpor.201200017 ↗
54. Photomechanical processes and effects in ablation10.1021/cr010436c ↗
55. Pulsed laser ablation of solids: transition from normal vaporization to phase explosion10.1007/s003390000686 ↗
56. Fundamentals of ultrafast laser–material interaction10.1557/mrs.2016.274 ↗
57. Kinetics of high-density plasmas generated in Si by 1.06- and 0.53-\ensuremath{\mu}m picosecond laser pulses10.1103/PhysRevB.35.8166 ↗
58. Photomechanical spallation of molecular and metal targets: molecular dynamics study10.1007/s00339-004-2682-2 ↗
59. Generation of subsurface voids and a nanocrystalline surface layer in femtosecond laser irradiation of a single-crystal Ag target
60. Microscopic mechanisms of laser spallation and ablation of metal targets from large-scale molecular dynamics simulations10.1007/s00339-013-8086-4 ↗
61. Femtosecond laser ablation: fundamentals and applications
62. Coulomb explosion in femtosecond laser ablation of Si(111)10.1063/1.1580647 ↗
63. Explosive femtosecond ablation from ionic crystals
64. Coulomb explosion in ultrashort pulsed laser ablation of Al2O3
65. Charging and plasma effects under ultrashort pulsed laser ablation
66. Investigation of ultrafast laser–photonic material interactions: challenges for directly written glass photonics10.1109/JSTQE.2008.925809 ↗
67. Processing grating structures on surfaces of wide-bandgap semiconductors using femtosecond laser and phase mask10.1117/1.OE.54.12.126106 ↗
68. Guo, Laser machining fundamentals: micro, nano, atomic and close-to-atomic scales
69. A critical review on the simulation of ultra-short pulse laser-metal interactions based on a two-temperature model (TTM)10.1016/j.optlastec.2022.109001 ↗
70. Small‐signal analysis of internal (Coupling‐Type) modulation of lasers10.1063/1.1713121 ↗
71. Effect of different parameters on machining of SiC/SiC composites via pico-second laser10.1016/j.apsusc.2015.12.089 ↗
72. A comparison among dry laser ablation and some different water-laser Co-machining processes of single crystal silicon carbide10.4028/www.scientific.net/MSF.861.3 ↗
73. Interaction of indentation-induced cracks on single-crystal silicon carbide10.1111/jace.13525 ↗
74. Ultrafine ductile-mode dicing technology for SiC substrate with metal film using PCD blade, Journal of Advanced Mechanical Design
75. Laser slicing of 4H-SiC wafers based on picosecond laser-induced micro-explosion via multiphoton processes10.1016/j.optlastec.2022.108323 ↗
76. High-speed dicing of SiC wafers by femtosecond pulsed laser10.4028/www.scientific.net/MSF.821-823.524 ↗
77. Picosecond pulsed laser ablation and micromachining of 4H–SiC wafers10.1016/j.apsusc.2008.11.071 ↗
78. Sapphire substrate sidewall shaping of deep ultraviolet light-emitting diodes by picosecond laser multiple scribing10.7567/APEX.10.062101 ↗
79. Fabrication of high-Q nanobeam photonic crystals in epitaxially grown 4H-SiC10.1021/acs.nanolett.5b02542 ↗
80. Internal modified-layer formation mechanism into silicon with nanosecond laser
81. Advanced dicing technology for semiconductor wafer—stealth dicing10.1109/TSM.2007.901849 ↗
82. 4H-SiC wafer slicing by using femtosecond laser double-pulses10.1364/OME.7.002450 ↗
83. Comparison of different novel chip separation methods for 4H-SiC10.4028/www.scientific.net/MSF.821-823.520 ↗
84. Dual laser beam asynchronous dicing of 4H-SiC wafer10.3390/mi12111331 ↗
85. Ultrafast pulsed laser stealth dicing of 4H-SiC wafer: structure evolution and defect generation10.1016/j.jmapro.2022.06.064 ↗
86. Precision layered stealth dicing of SiC wafers by ultrafast lasers10.3390/mi13071011 ↗
87. Study on picosecond laser stealth dicing of 4H-SiC along [112‾0] and [11‾00] crystal orientations on Si-face and C-face10.1016/j.optlastec.2023.109300 ↗
88. High-speed observation of damage generation during ultrashort pulse laser drilling of wide-bandgap materials
89. High-speed observation of pulse energy and pulse width dependences of damage generation in SiC during ultrashort pulse laser drilling10.1007/s00339-020-04018-y ↗
90. Investigation of damage generation process by stress waves during femtosecond laser drilling of SiC10.1016/j.precisioneng.2021.08.006 ↗
91. Effects of micro texture processed by picosecond laser on hydrophobicity of silicon carbide10.15541/jim20230073 ↗
92. Generation of optical pulses shorter than 0.1 psec by colliding pulse mode locking10.1063/1.92500 ↗
93. Surface characterization of 6H-SiC substrate irradiated by femtosecond laser10.7567/JJAP.54.071302 ↗
94. Femtosecond laser damage threshold and nonlinear characterization in bulk transparent SiC materials10.1364/JOSAB.25.000060 ↗
95. Fabrication of through holes in silicon carbide using femtosecond laser irradiation and acid etching10.1016/j.apsusc.2013.11.030 ↗
96. Fabrication of grating structures on silicon carbide by femtosecond laser irradiation and wet etching10.3788/COL201614.021407 ↗
97. Machinability improvement of silicon carbide via femtosecond laser surface modification method10.1007/s00339-018-2377-8 ↗
98. SiC materials and technologies for sensors development10.4028/www.scientific.net/MSF.483-485.1009 ↗
99. Silicon carbide nano-via arrays fabricated by double-sided metal-assisted photochemical etching
100. Review—progress in electrochemical etching of third-generation semiconductors10.1149/2162-8777/acce03 ↗