3D printed CuO semiconducting gas sensor for ammonia detection at room temperature
Source abstract
Abstract
Abstract In this work, a new room-temperature ammonia gas sensor based on n-type copper oxide (CuO) semiconductor was fabricated by 3D printing with fused deposition modeling (FDM) technique and sintering method. The polylactic acid (PLA) was blended together with Cu particles and extruded into the filament form for FDM printing. The PLA/Cu composite was printed and calcined in a furnace to obtain semiconducting CuO. The structural characterization results of 3D printed sensor showed monoclinic CuO phase and scaffold structures, which provided active porous sites for enhanced gas adsorption and room-temperature gas-sensing performances. According to gas-sensing data, the 3D printed CuO gas sensor exhibited good repeatability, high stability (>3 months), low humidity dependency (25–65 %RH), high sensitivity and selectivity towards ammonia at room temperature. The sensor response increased linearly with increasing NH3 concentration from 25 to 200 ppm. The sensing mechanism of the 3D printed CuO sensor was proposed based on the resistance change via reaction on adsorbed surface oxygen species or direct electron transfer between ammonia molecules and CuO. This approach could open up new ways to fabricate semiconductor gas sensors with controllable sizes and shapes for future gas-sensing applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. 3D printing to enable multifunctionality in polymer-based composites: a review10.1016/j.compositesb.2019.107540 ↗
2. Powering up on powder technology10.1016/j.mprp.2015.08.075 ↗
3. Personalized treatment planning for heart interventions using tissue-mimicking 3D printing10.2217/3dp-2017-0024 ↗
4. Interfacial shear strength estimates of NiTi-Al matrix composites fabricated via ultrasonic additive manufacturing10.1016/j.compositesb.2015.03.005 ↗
5. A multi-material virtual prototyping system10.1016/j.cad.2004.06.002 ↗
6. Trends in 3D printing technology for construction automation using text mining10.1007/s12541-019-00117-w ↗
7. The application of 3D printing in anatomy education
8. Embedded 3D printing of strain sensors within highly stretchable elastomers10.1002/adma.201400334 ↗
9. A simple, low-cost conductive composite material for 3D printing of electronic sensors10.1371/journal.pone.0049365 ↗
10. 3D printing for the rapid prototyping of structural electronics10.1109/ACCESS.2014.2311810 ↗
11. Integrating stereolithography and direct print technologies for 3D structural electronics fabrication10.1108/13552541211212113 ↗
12. The boom in 3D-printed sensor technology10.3390/s17051166 ↗
13. Design principles for rapid prototyping forces sensors using 3D printing10.1109/TMECH.2011.2160353 ↗
14. 3D-printed microelectronics for integrated circuitry and passive wireless sensors10.1038/micronano.2015.13 ↗
15. 3D printed bionic ears10.1021/nl4007744 ↗
16. 3D printed freeform optical sensors for metrology application, Proc. SPIE 9628
17. Biomimetic sniffing improves the detection performance of a 3D printed nose of a dog and a commercial trace vapor detector10.1038/srep36876 ↗
18. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling10.1016/j.compositesb.2015.06.013 ↗
19. Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers10.1016/j.compositesb.2017.05.013 ↗
20. FDM 3D printing technology in manufacturing composite elements10.2478/amm-2013-0186 ↗
21. Metal oxide semiconductor 3D printing: preparation of copper(ii) oxide by fused deposition modelling for multi-functional semiconducting applications10.1039/C7TC00990A ↗
22. Optical, thermal, mechanical properties and non-isothermal degradation kinetic studies on PVA/CuO nanocomposites10.1002/pc.25235 ↗
23. Development and antibacterial activities of bacterial cellulose/graphene oxide-CuO nanocomposite films10.1016/j.carbpol.2019.115456 ↗
24. Effect of annealing time on the structural and optical properties of n-CuO thin films deposited by sol-gel spin coating technique and its application in n-CuO/p-Si heterojunction diode10.1016/j.tsf.2019.06.026 ↗
25. Preparation and characterization of single-phased n-type CuO film by DC magnetron sputtering10.1016/j.physb.2019.02.037 ↗
26. Fabrication of cuprous and cupric oxide thin films by heat treatment10.1016/j.apsusc.2009.07.072 ↗
27. RF sputtered CuO thin films: structural, optical and photo-catalytic behavior10.1016/j.physe.2016.03.004 ↗
28. Characterization of the microstructure and the optical and electrical properties of the direct-current magnetron sputtered CuO films at different substrate temperatures10.1016/j.physb.2018.07.013 ↗
29. CO gas sensors based on p-type CuO nanotubes and CuO nanocubes: morphology and surface structure effects on the sensing performance10.1016/j.talanta.2018.05.059 ↗
30. Rapid synthesis strategy of CuO nanocubes for sensitive and selective detection of NO210.1016/j.jallcom.2017.03.079 ↗
31. In Depth study on the notable room-temperature NO2 gas sensor based on CuO nanoplatelets prepared by sonochemical method: comparison of various bases10.1016/j.snb.2018.03.106 ↗
32. The novel transparent sputtered p-type CuO thin films and Ag/p-CuO/n-Si Schottky diode applications10.1016/j.rinp.2015.11.001 ↗
33. A study of the CuO phase formation during thin film deposition by molecular beam epitaxy10.1016/S0040-6090(97)01203-0 ↗
34. Preparation of copper oxide thin film by the sol-gel-like dip technique and study of their structural and optical properties10.1016/S0927-0248(00)00364-0 ↗
35. Performance improvement of TiO2/CuO solar cell by growing copper particle using fix current electroplating method10.1016/j.proeng.2017.03.014 ↗
36. Sol-gel processed CuOx thin film as an anode interlayer for inverted polymer solar cells10.1016/j.orgel.2010.08.009 ↗
37. Preparation of advanced CuO nanowires/functionalized graphene composite anode material for lithium ion batteries10.3390/ma10010072 ↗
38. Hydrothermally prepared Ag2O/CuO nanomaterial for an efficient chemical sensor development for environmental remediation
39. Facile synthesis of Cu2O and CuO nanoparticles and study of their structural, optical and electronic properties10.1016/j.jallcom.2018.01.181 ↗
40. Response speed of SnO2-based H2S gas sensors with CuO nanoparticles10.1063/1.1646760 ↗
41. Surface accumulation conduction controlled sensing characteristic of p-type CuO nanorods induced by oxygen adsorption10.1088/0957-4484/18/14/145506 ↗
42. Ultrasensitive and ultraselective detection of H2S using electrospun CuO-loaded In2O3 nanofiber sensors assisted by pulse heating10.1016/j.snb.2014.11.130 ↗
43. Nanostructured copper oxides as ethanol vapour sensors10.1016/j.snb.2013.05.042 ↗
44. 3D-Printed chemiresistive sensor array on nanowire CuO/Cu2O/Cu heterojunction nets10.1021/acsami.9b04385 ↗
45. Facile fabrication of semiconducting oxide nanostructures by direct ink writing of readily available metal microparticles and their application as low power acetone gas sensors10.1016/j.nanoen.2019.104420 ↗
46. Oxidation mechanism of thin Cu films: a gateway towards the formation of single oxide phase10.1063/1.5028407 ↗
47. Wet synthesis of copper oxide nanopowder10.1080/19430840903430220 ↗
48. Gas sensing properties of semiconducting copper oxide nanospheroids10.1016/j.powtec.2015.06.023 ↗
49. Copper (II) oxide nanowires for p-type conductometric NH3 sensing10.1016/j.apsusc.2014.05.038 ↗
50. Studies and correlation among the structural, electrical and gas response properties of aerosol spray deposited self assembled nanocrystalline CuO10.1016/j.apsusc.2011.03.133 ↗
51. Highly selective detection of NH3 and H2S using the pristine CuO and mesoporous In2O3@CuO multijunctions nanofibers at room temperature10.1016/j.snb.2017.08.200 ↗
52. CuO-ZnO semiconductor gas sensor for ammonia at room temperature
53. Coupling nanowire chemiresistors with MEMS microhotplate gas sensing platforms10.1063/1.2768861 ↗
54. Preparation of hexagonal WO3 from hexagonal ammonium tungsten bronze for sensing NH310.1016/j.materresbull.2008.08.003 ↗
55. Fast response ammonia sensors based on TiO2 and NiO nanostructured bilayer thin films10.1039/C6RA14342C ↗
56. Ammonia gas sensors: a comprehensive review10.1016/j.talanta.2019.06.034 ↗
57. Thermal conductivity and molecular heat transport of nanofluids10.1039/C8RA08987F ↗
58. Influence of humidity on CO sensing with p-type CuO thick film gas sensors10.1016/j.snb.2010.10.046 ↗
59. Room-temperature ammonia sensor based on cationic surfactant-assisted nanocrystalline CuO10.1021/am900914h ↗
60. Enhanced ethanol vapour sensing performances of copper oxide nanocrystals with mixed phases10.1016/j.snb.2015.10.042 ↗
61. Synthesis, characterization and DFT studies of zinc-doped copper oxide nanocrystals for gas sensing applications10.1039/C6TA01355D ↗
62. Ultrahigh selective room-temperature ammonia gas sensor based on Tin-Titanium dioxide/reduced graphene/carbon nanotube nanocomposites by the solvothermal method10.1021/acsomega.9b02185 ↗
63. Hydroxyl edge-functionalized graphene quantum dots for gas-sensing applications10.1016/j.diamond.2020.107790 ↗
64. Gas sensing properties of CuO nanorods synthesized by a microwave-assisted hydrothermal method10.1016/j.snb.2011.06.024 ↗