journal article·2018-05

Recent advances in diamond power semiconductor devices

Hitoshi Umezawa

Publisher page

Abstract

Abstract Diamond is known as an ultimate material because of its superior properties and it is expected to be employed in next-generation power electronic devices. Progress in epitaxial growth and fabrication techniques such as p- and n-type doping control with low compensation and surface treatment have improved the performance of power devices. High forward-current density and long-term stability have been achieved for Schottky barrier diodes operating at 400 °C. Fast turn-off operation with low loss and a high blocking capability of > 10 kV have also been realized. In addition, high blocking voltages of more than 2 kV have been achieved for switching devices such as metal-semiconductor field-effect transistors (MESFETs) and metal-oxide semiconductor FETs. To maximize device performance up to the material limit requires the development of fabrication techniques such as selective area doping, lithography, etching, formation of diamond/oxide interfaces and also defect reduction. Here, the current status of semiconductor diamond technology is reviewed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Semiconductor materials and devices · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. High carrier mobility in single-crystal plasma-deposited diamond10.1126/science.1074374 ↗
2. Impact ionization in semiconductor structures made of ion-implanted diamond
3. Power semiconductor-device figure of merit for high-frequency applications10.1109/55.43098 ↗
4. New unipolar switching power device figures of merit10.1109/LED.2004.826533 ↗
5. Charge transport properties of single crystal CVD-diamond particle detectors10.1016/j.diamond.2006.11.016 ↗
6. RF diamond transistors: Current status and future prospects10.1143/JJAP.44.7789 ↗
7. Characterization of boron doped diamond epilayers grown in a NIRIM type reactor10.1016/j.diamond.2008.01.087 ↗
8. High breakdown voltage Schottky diodes synthesized on p-type CVD diamond layer10.1002/pssa.201000055 ↗
9. Extreme dielectric strength in boron doped homoepitaxial diamond10.1063/1.3520140 ↗
10. High voltage diamond pin diodes: Feasibility study on ultimate properties of diamond toward ultimate power devices
11. Thin large area vertical Schottky barrier diamond diodes with low on-resistance made by ion-beam assisted lift-off technique10.1016/j.diamond.2017.02.006 ↗
12. Diamond Schottky barrier diode for high-temperature, high-power, and fast switching applications10.7567/JJAP.53.05FP06 ↗
13. Model implementation towards the prediction of J(V) characteristics in diamond bipolar device simulations10.1016/j.diamond.2014.01.009 ↗
14. A large range of boron doping with low compensation ratio for homoepitaxial diamond films10.1016/S0008-6223(98)00275-9 ↗
15. The future of power semiconductor device technology10.1109/5.931471 ↗
16. Electrical resistivity and metal-nonmetal transition in n-type doped 4H-SiC10.1103/PhysRevB.74.245201 ↗
17. Optimal drift region for diamond power devices10.1016/j.diamond.2016.07.006 ↗
18. Characterization of leakage current on diamond Schottky barrier diodes using thermionic-field emission modeling10.1016/j.diamond.2006.08.030 ↗
19. Device scaling of pseudo-vertical diamond power Schottky barrier diodes10.1016/j.diamond.2009.04.013 ↗
20. A 3.4eV potential barrier height in Schottky diodes on boron-doped diamond thin films10.1016/j.diamond.2003.10.012 ↗
21. Leakage current analysis of diamond Schottky barrier diode10.1063/1.2643374 ↗
22. Electric field breakdown of lateral Schottky diodes of diamond10.1143/JJAP.46.L196 ↗
23. Zr/oxidized diamond interface for high power Schottky diodes10.1063/1.4864060 ↗
24. D. Eon, A. Traore, J. Pernot, E. Gheeraert, in: IEEE 2016 Proceedings of the 28th International Symposium on Power Semiconductor Devices and Ics (ISPSD), 2016, pp. 55–58.10.1109/ISPSD.2016.7520776 ↗
25. Diamond Schottky diodes with ideality factors close to 110.1063/1.4897315 ↗
26. Increase in reverse operation limit by barrier height control of diamond Schottky barrier diode10.1109/LED.2009.2026439 ↗
27. Potential barrier heights at metal on oxygen-terminated diamond interfaces10.1063/1.4936317 ↗
28. Localized mid-gap-states limited reverse current of diamond Schottky diodes10.1063/1.4712437 ↗
29. Characterization of Schottky barrier diodes on a 0.5-inch single-crystalline CVD diamond wafer10.1016/j.diamond.2009.11.001 ↗
30. Leakage current analysis of diamond Schottky barrier diodes operated at high temperature10.7567/JJAP.53.04EP04 ↗
31. High temperature switching operation of a power diamond Schottky barrier diode10.1587/elex.9.1835 ↗
32. Thermally stable schottky barrier diode by Ru/diamond10.1143/APEX.2.011202 ↗
33. Thermally stable solar-blind diamond UV photodetector10.1016/j.diamond.2006.08.009 ↗
34. H. Umezawa, S. Ohmagari, Y. Mokuno, J. Kaneko, in: Proceedings of the 29th International Symposium on Power Semiconductor Devices and ICs, IEEE, Sapporo, Japan, 2017, pp. 379–382.10.23919/ISPSD.2017.7988983 ↗
35. M. Brezeanu, S.J. Rashid, G.A.J. Amaratunga, N.L. Rupesinghe, T. Butler, F. Udrea, G. Brezeanu, in: IEEE 2006 International Semiconductor Conference, 2006, pp. 311–314.10.1109/SMICND.2006.284006 ↗
36. Numerical parameterization of chemical-vapor-deposited (CVD) single-crystal diamond for device simulation and analysis10.1109/TED.2008.2003225 ↗
37. MIP structure Schottky diode with different drift layer thickness10.1016/j.diamond.2016.11.005 ↗
38. K. Asano, T. Hayashi, R. Saito, Y. Sugawara, in: IEEE Proceedings of the 12th International Symposium on Power Semiconductor Devices & ICs, IEEE, New York, 2000, pp. 97–100.
39. Diamond merged diode10.1016/j.diamond.2006.12.060 ↗
40. The effect of boron doping on the lattice parameter of homoepitaxial diamond films10.1016/S0925-9635(97)00316-6 ↗
41. TEM study and film thickness dependence of Tc in heavily boron-doped superconducting diamond10.1016/j.physc.2009.12.064 ↗
42. Critical boron-doping levels for generation of dislocations in synthetic diamond10.1063/1.4900741 ↗
43. Vertical diamond Schottky barrier diode fabricated on insulating diamond substrate using deep etching technique10.1109/TED.2013.2247609 ↗
44. Diamond Schottky-pn diode without trade-off relationship between on-resistance and blocking voltage10.1002/pssa.201000149 ↗
45. Diamond Schottky-pn diode using lightly nitrogen-doped layer10.1016/j.diamond.2017.03.018 ↗
46. Diamond Schottky-pn diode with high forward current density and fast switching operation10.1063/1.3159837 ↗
47. Bipolar-transistor action in ion-implanted diamond10.1063/1.93346 ↗
48. Diamond MESFET using ultrashallow RTP boron doping10.1109/55.75749 ↗
49. An ion-implanted diamond metal-insulator semiconductor field-effect transistor10.1109/55.119211 ↗
50. Diamond metal-semiconductor field-effect transistor with breakdown voltage over 1.5kV10.1109/LED.2014.2356191 ↗
51. Fabrication and characterization of high breakdown voltage AlGaN/GaN heterojunction field effect transistors on sapphire substrates10.1116/1.2366542 ↗
52. Deep-depletion mode boron-doped monocrystalline diamond metal oxide semiconductor field effect transistor10.1109/LED.2017.2755718 ↗
53. Diamond junction FETs based on delta-doped channels10.1016/S0925-9635(98)00393-8 ↗
54. Normally-off diamond junction field-effect transistors with submicrometer channel10.1109/LED.2015.2513074 ↗
55. High-temperature operation of diamond junction field-effect transistors with lateral p-n junctions10.1109/LED.2013.2271377 ↗
56. Improvement of (001)-oriented diamond p-i-n diode by use of selective grown n(+) layer10.1002/pssa.201000148 ↗
57. High-temperature bipolar-mode operation of normally-Off diamond JFET10.1109/JEDS.2016.2624301 ↗
58. Hydrogen-terminated diamond surfaces and interfaces10.1016/S0167-5729(97)80002-7 ↗
59. Schottky barrier heights, carrier density, and negative electron affinity of hydrogen-terminated diamond10.1103/PhysRevB.81.045303 ↗
60. High-performance diamond metal-semiconductor field-effect transistor with 1μm gate length10.1143/JJAP.38.L1222 ↗
61. High-performance p-channel diamond metal-oxide-semiconductor field-effect transistors on H-terminated (111) surface10.1143/APEX.3.044001 ↗
62. Diamond field-effect transistors with 1.3A/mm drain current density by Al2O3 passivation layer10.1143/JJAP.51.090112 ↗
63. High-frequency performance of diamond field-effect transistor10.1109/55.936353 ↗
64. Fabrication of 0.1 µm channel diamond metal-insulator-semiconductor field-Effect transistor10.1557/PROC-680-E8.2 ↗
65. Diamond field-effect transistors for RF power electronics: novel NO2 hole doping and low-temperature deposited Al2O3 passivation10.7567/JJAP.56.01AA01 ↗
66. RF performance of high transconductance and high-channel-mobility surface-channel polycrystalline diamond metal-insulator-semiconductor field-effect transistors10.1143/JJAP.41.2611 ↗
67. FET using high-quality polycrystalline diamond with f(T) of 45 GHz and f(max) of 120 GHz10.1109/LED.2006.876325 ↗
68. Normally-Off C-H diamond MOSFETs with partial C-O channel achieving 2-kV breakdown voltage10.1109/LED.2017.2661340 ↗
69. Durability-enhanced two-dimensional hole gas of C-H diamond surface for complementary power inverter applications10.1038/srep42368 ↗
70. Inversion channel diamond metal-oxide-semiconductor field-effect transistor with normally off characteristics10.1038/srep31585 ↗
71. Edge termination techniques for p-type diamond Schottky barrier diodes10.1016/j.diamond.2007.12.066 ↗
72. High temperature application of diamond power device10.1016/j.diamond.2012.01.011 ↗
73. Ramp oxide termination structure using high-k dielectrics for high voltage diamond Schottky diodes10.1016/j.diamond.2007.01.016 ↗
74. M. Brezeanu, M. Avram, S.J. Rashid, G.A.J. Amaratunga, T. Butler, N.L. Rupesinghe, F. Udrea, A. Tajani, M. Dixon, D.J. Twitchen, A. Garraway, D. Chamund, P. Taylor, G. Brezeanu, Termination structures for diamond Schottky barrier diodes, in: IEEE Proceedings of the 18th International Symposium on Power Semiconductor Devices & Ics, 2006, pp. 73–76.
75. W. Huang, T.P. Chow, J. Yang, J.E. Butler, in: IEEE Proceedings of the 17th International Symposium on Power Semiconductor Devices & Ics, 2005, pp. 319–322.
76. Semi-Insulating Polycrystalline-Silicon (SIPOS) Passivation Technology10.7567/JJAPS.15S1.35 ↗
77. Defect and field-enhancement characterization through electron-beam-induced current analysis10.1063/1.4982590 ↗
78. Influence of epitaxy on the surface conduction of diamond film10.1016/j.diamond.2003.10.025 ↗
79. Development of diamond Schottky barrier diode
80. Vertical structure Schottky barrier diode fabrication using insulating diamond substrate10.1016/j.diamond.2010.06.019 ↗
81. Cost-size optima of monolitic integrated circuits10.1109/PROC.1964.3442 ↗
82. X-ray topography studies of dislocations in single crystal CVD diamond10.1016/j.diamond.2007.12.036 ↗
83. Characterization of crystallographic defects in homoepitaxial diamond films by synchrotron X-ray topography and cathodoluminescence10.1016/j.diamond.2011.02.007 ↗
84. Effect of an ultraflat substrate on the epitaxial growth of chemical-vapor-deposited diamond10.7567/APEX.6.025506 ↗
85. X-ray topographic study of defect in p- diamond layer of Schottky barrier diode10.1016/j.diamond.2015.03.021 ↗
86. Non-destructive detection of killer defects of diamond Schottky barrier diodes10.1063/1.3626791 ↗