journal article·1995-07

Science of defect control in semiconductors

K. Sumino

Materials Science and Technology· Volume 11· Issue 7
Publisher page

Abstract

A review is presented of some scientific problems underlying defect control in semiconductors, focusing particularly on the interaction of extended defects with impurities. It is demonstrated that reaction between extended defects and impurities plays a very important role in defect control in semiconductors. Some special type of reaction incorporating impurity atoms, which does not occur in the matrix region of a crystal, can occur at the core region of an extended defect because of the peculiarity in the atomic structure there. Gettering of impurities by extended defects occurs as a result of such a reaction at some specific temperatures. Impurity gettering by an extended defect causes electrical and optical inhomogeneities in the region around it. Such inhomogeneity can be controlled by heat treatment of the crystal. Impurity gettering also results in the immobilisation of dislocations. With a suitable selection of the thermal circumstances to which a crystal is exposed the generation of dislocations from structural irregularities can effectively be suppressed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Surface and Thin Film Phenomena · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Materials Research, Tohoku University, Sendai, Japan

References (9)

Show source-provided references
1. K. SUMINO: in MRS Symp. Proc. ‘Defects in semiconductors 2’, Vol. 14, (ed. S. Mahajan and J. W. Corbett), 307; 1983, New York/Amsterdam/Oxford, North-Holland.
2. K. SUMINO: in ‘Point and extended defects in semiconductors’, (ed. G. Benedek et al .), 77 ; 1989, New York/London, Plenum.10.1007/978-1-4684-5709-4_6 ↗
3. I. YONENAGA and K. SUMINO: in Proc. 9th Yamada Conf. on ‘Dislocations in solids’, (ed. H. Suzuki et al .), 385; 1985, Tokyo, University of Tokyo Press.
4. D. B. HOLT: in ‘Point and extended defects in semiconductors’, (ed. G. Benedek et al .), 207; 1989, New York/London, Plenum.10.1007/978-1-4684-5709-4_16 ↗
5. M. SATO and K. SUMINO: in Proc. 9th Yamada Conf. on ‘Dislocations in solids’, (ed. H. Suzuki et al .), 391; 1985, Tokyo, University of Tokyo Press.
6. K. SUMINO and I. YONENAGA: in Proc. Conf. `Gettering and defect engineering in semiconductor technology ‘91’, Solid State Phenomena, Vols. 19-20, (ed. M. Kittler and H. Richter), 295; 1991, Liechtenstein, Sci-Tech.10.4028/www.scientific.net/SSP.19-20.295 ↗
7. K. SUMINO: in MRS Symp. Proc. ‘Oxygen, carbon, hydrogen and nitrogen in crystalline silicon’, Vol. 59, (ed. J. C. Mikkelsen, Jr et al .), 369; 1986, Pittsburgh, PA, Materials Research Society.
8. K. SUMINO: in MRS Symp. Proc. ‘Defect engineering in semiconductor growth, processing and device technology’, Vol. 262, (ed. S. Ashok et al .), 87; 1992, Pittsburgh, PA, Materials Research Society.10.1557/PROC-262-87 ↗
9. T. IBUKA, Y. SETA, M. TANAMURA, F. ORITO, T. OKANO, F. HYUGA, and J. OSAKA: in ‘Semi-insulating III—V materials’, (ed. H. Kukimoto et al .), 77 ; 1986, Tokyo/Amsterdam, Ohm and North-Holland.