Improving the Performance of Blue Polymer Light-Emitting Diodes Using a Hole Injection Layer with a High Work Function and Nanotexture

For light-emitting polymers with a deep highest occupied molecular orbital energy level used for polymer light-emitting diodes (PLEDs), the hole injection barrier and hole transport of the anode buffer layer are of vital importance for optimizing electroluminescent performance. In this study, high-work-function hole injection layers with nanotextures were achieved by modifying poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) with a perfluorinated ionomer (PFI) and n-butyl alcohol and were used to achieve a single-layer device without a hole transport layer. With such an interlayer, the PLEDs based on PPF-SO25 exhibit remarkable current efficiency over 13.0 cd A–1, which significantly outperform the devices with regular PEDOT:PSS. To our knowledge, this performance is among the best reported for single-layer blue PLEDs. The bias-dependent capacitance curves of these PLEDs suggest a nonuniform surface distribution of PFI. Our findings show that the PFI-modified PEDOT:PSS not only operates as a high-work-function hole injection layer to facilitate hole injection but also as a potential inner scattering medium for light extraction.