journal article·2026-08

Fabrication of AlMgB 14 nanoparticles by high energy ball milling of bulk compound prepared by spark plasma sintering

E Bakhshizade, A Shokuhfar, A Zolriasatein, M Khodaei

Materials Science and Technology· Volume 42· Issue 11
Publisher page

Abstract

Aluminum Magnesium Boride (BAM), an intermetallic compound, exhibits exceptional hardness, a low coefficient of friction, low density, high electrical conductivity, and outstanding thermoelectric properties. These characteristics make it a promising candidate for applications in semiconductors, as a reinforcing agent in metal and ceramic matrix composites, and as a wear-resistant coating across a wide range of temperatures. In this work, BAM nanoparticles were prepared by high-energy ball milling of constituent as a solid-state route. BAM was synthesized by spark plasma sintering of Al 12 Mg 17 intermetallic and B powders. The powders with a stoichiometric ratio were mechanically milled and sintered by SPS (40 MPa/ 1400 °C/ 5 min). It was found that the use of Al 12 Mg 17 intermetallic compound as a precursor (in comparison to the use of elemental Al and Mg) gives a high efficiency (≈92%) to synthesize BAM material with a hardness (27.98 ± 0.9 GPa) and density (2.68 ± 0.002 g/cm 3 ) close to the theoretical values. Finally, the BAM nanoparticles (the mean diameter of 32.4 nm) were successfully obtained by mechanical milling of the bulk sample, for the first time.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

K. N. Toosi University of Technology

K.N. Toosi University of Technology

Niroo Research Institute

References (57)

Show source-provided references
1. 10.1107/S056774087000286810.1107/S0567740870002868 ↗
2. 10.1016/S1359-6462(99)00400-510.1016/S1359-6462(99)00400-5 ↗
3. 10.1016/0022-5088(79)90028-610.1016/0022-5088(79)90028-6 ↗
4. 10.1016/0925-8388(93)90549-310.1016/0925-8388(93)90549-3 ↗
5. 10.1016/j.triboint.2018.07.01410.1016/j.triboint.2018.07.014 ↗
6. 10.3390/nano1221380510.3390/nano12213805 ↗
7. Qu J Blau PJ Zhu D et al. Tribological characteristics of AlMgB14 and nanocomposite AlMgB14-TiB2 superhard coatings. In International joint tribology conference 2008 pp. 757–759.10.1115/IJTC2008-71176 ↗
8. 10.1016/j.wear.2010.11.04410.1016/j.wear.2010.11.044 ↗
9. 10.1016/S1359-6462(02)00034-910.1016/S1359-6462(02)00034-9 ↗
10. 10.1016/j.triboint.2019.05.03310.1016/j.triboint.2019.05.033 ↗
11. 10.3390/nano1310158910.3390/nano13101589 ↗
12. 10.1016/j.triboint.2016.03.02210.1016/j.triboint.2016.03.022 ↗
13. 10.1016/j.surfcoat.2010.09.00710.1016/j.surfcoat.2010.09.007 ↗
14. 10.1016/j.wear.2014.12.03410.1016/j.wear.2014.12.034 ↗
15. 10.3390/ma1621693010.3390/ma16216930 ↗
16. 10.1063/1.161567710.1063/1.1615677 ↗
17. 10.1016/j.tsf.2010.03.03810.1016/j.tsf.2010.03.038 ↗
18. 10.1063/1.479529810.1063/1.4795298 ↗
19. 10.3390/ma1204063210.3390/ma12040632 ↗
20. 10.1016/j.solidstatesciences.2015.03.01510.1016/j.solidstatesciences.2015.03.015 ↗
21. 10.1002/apxr.20230001010.1002/apxr.202300010 ↗
22. 10.1088/2515-7655/ac49dc10.1088/2515-7655/ac49dc ↗
23. 10.1039/D2TA07949F10.1039/D2TA07949F ↗
24. 10.1016/j.fpc.2023.03.00110.1016/j.fpc.2023.03.001 ↗
25. 10.1016/j.triboint.2015.12.02610.1016/j.triboint.2015.12.026 ↗
26. 10.1007/s11249-018-1113-z10.1007/s11249-018-1113-z ↗
27. Buschmann R. Metal matrix composites: custom-made materials for automotive and aerospace engineering. Weinheim, FRG: Wiley-VCH Verlag GmbH and Co. KGaA, 2006.
28. 10.1007/BF0339777810.1007/BF03397778 ↗
29. 10.1002/sia.732210.1002/sia.7322 ↗
30. 10.1080/02670836.2023.218715310.1080/02670836.2023.2187153 ↗
31. Cook B Harringa J Russell A. Superabrasive boride and a method of preparing the same by mechanical alloying and hot pressing 2002.
32. 10.1080/0895795070184689310.1080/08957950701846893 ↗
33. Okada S Kudou K Mori T et al. Crystal growth of aluminum magnesium borides from Al-Mg-B ternary system solutions and properties of the crystals. Materials Science Forum Trans Tech Publ 2004 pp. 365-368.10.4028/www.scientific.net/MSF.449-452.365 ↗
34. 10.1080/17436753.2017.131711610.1080/17436753.2017.1317116 ↗
35. 10.1016/j.jssc.2003.02.00510.1016/j.jssc.2003.02.005 ↗
36. 10.1016/j.ceramint.2023.12.41410.1016/j.ceramint.2023.12.414 ↗
37. 10.1016/j.jmrt.2021.01.04410.1016/j.jmrt.2021.01.044 ↗
38. 10.1016/S0921-5093(02)00835-310.1016/S0921-5093(02)00835-3 ↗
39. 10.3390/cryst1009082310.3390/cryst10090823 ↗
40. Yang X, Wen L. Microstructural and mechanical behavior of mechanical alloying intermetallic compounds between aluminum, magnesium and boron. J Ceram Process Res 2013; 14: 583–586.
41. 10.1016/j.mtcomm.2019.10084810.1016/j.mtcomm.2019.100848 ↗
42. 10.1016/j.jeurceramsoc.2006.04.11410.1016/j.jeurceramsoc.2006.04.114 ↗
43. 10.30544/13210.30544/132 ↗
44. Zolriasatein A, Shokuhfar A, Safari F. Investigation of mechanical properties of aluminum matrix nanocomposites via well-distributed Al12Mg17 complex metallic alloy nanoparticles using mechanical milling. JOM 2023: 1–11.
45. Nikitin P Zhukov I Vorozhtsov A et al. Effect of dispersity of powder system Al-Mg-B on the phase composition of sintered ceramics AlMgB14. In MATEC web of conferences EDP Sciences 2018 p. 1–4.10.1051/matecconf/201824300009 ↗
46. 10.2298/SOS1703311Y10.2298/SOS1703311Y ↗
47. Pilling N. The oxidation of metals at high temperature. J Inst Met 1923; 29: 529–582.
48. 10.3389/fmats.2021.76105210.3389/fmats.2021.761052 ↗
49. 10.1049/mnl.2017.060810.1049/mnl.2017.0608 ↗
50. 10.1016/j.matdes.2015.03.01410.1016/j.matdes.2015.03.014 ↗
51. Javadipour S Shokuhfar A Heidary Z et al. Characterization of Al $ _ {12} $ Mg $ _ {17} $ nanofluid by dynamic light scattering and beam displacement methods. arXiv preprint arXiv:2306.13766 2023.
52. 10.1016/S0079-6425(99)00010-910.1016/S0079-6425(99)00010-9 ↗
53. 10.1007/s11182-018-1557-510.1007/s11182-018-1557-5 ↗
54. Khodaei M. Characterization of Al2O3 in Fe3Al-30 vol.% Al2O3 nanocomposite powder synthesized by mechanochemical process. J Nanostruct 2020; 10: 456–462.
55. 10.1016/j.ceramint.2018.02.07310.1016/j.ceramint.2018.02.073 ↗
56. 10.1016/j.intermet.2024.10852410.1016/j.intermet.2024.108524 ↗
57. Bakhshizade E Khodaei M Zolriasatein A et al. Microstructural mechanical and tribological properties of hybrid aluminum matrix nanocomposite reinforced with complex metallic alloy and graphite submitted 2024.