Research progress in the study of textured piezoelectric ceramics
Source abstract
Abstract
Piezoelectric ceramics have the advantages of uniform composition, excellent performance, good electromechanical coupling performance, and high cost performance. They are currently one of the important materials for manufacturing sensors and semiconductor components on the market. Although piezoelectric ceramic materials are widely used because of their many advantages, how to improve their piezoelectric properties is still a hot and difficult research spot. Previously, the piezoelectric properties of piezoelectric ceramics were affected by adjusting the grain size, but due to its limited enhancement effect, researchers hope to find other ways to improve the piezoelectric properties of ceramics more efficiently. Research has found that texture process can enable isotropic ceramics to obtain similar characteristics to single crystals that exhibit anisotropy. This greatly improves the piezoelectric properties of ceramics. During the texture process, the type and content of the template, texture degree and texture orientation, and other factors will significantly affect the piezoelectric properties of textured ceramics. With the continuous development of texture technology and process, the piezoelectric properties of textured ceramics have been significantly improved, but the practical application is less. Based on this, this article expounds the design principles of textured ceramics, summarizes the progress in the preparation of textured piezoelectric ceramics, and systematically explains the importance of template and texture orientation selection in texture processing. Finally, this paper also analyses the application of textured ceramics, and looks forward to the optimization methods and development prospects of piezoelectric ceramics. It is hoped to help the application and development of piezoelectric ceramics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Xi’an University of Science and Technology, Xi’an 710000, China
National Key Laboratory for Remanufacturing, Army Academy of Armored Forces, Beijing 100072, China
AECC Harbin DongAn Engine Co, LTD., Harbin, 150066, China
Funding
National Natural Science Foundation of China · Science and Technology New Star Project of Shaanxi Innovation Capability Support Program · China Postdoctoral Science Foundation
References (77)
Show source-provided references
1. 10.1016/j.actamat.2023.11899710.1016/j.actamat.2023.118997 ↗
2. Li XW, Gao R, Huang YF, et al. Research status of lead-free piezoelectric ceramic doping and preparation technology of potassium sodium niobate. China Surface Engineering 2023; 36: 1–20.
3. 10.1016/j.ceramint.2023.12.26410.1016/j.ceramint.2023.12.264 ↗
4. 10.1007/s10854-015-2920-810.1007/s10854-015-2920-8 ↗
5. 10.1016/j.ceramint.2023.12.03210.1016/j.ceramint.2023.12.032 ↗
6. Zhang Y, Tang M, Wang Y, et al. Effect of post-annealing on the electrical properties of textured Pb (Mg1/3Nb2/3) O3–PbZrO3–PbTiO3 piezoelectric ceramics. Ceramics International, 2024; 50: 18814–18820.
7. Tang W, Wang C, Wang Y, et al. Enhanced and reliable high-power performance of PMN–PZT-based piezoelectric ceramics. Ceramics International, 2024; 50: 17106–17115.
8. 10.1016/j.jeurceramsoc.2023.07.06910.1016/j.jeurceramsoc.2023.07.069 ↗
9. 10.1016/j.jeurceramsoc.2023.09.07610.1016/j.jeurceramsoc.2023.09.076 ↗
10. 10.1063/5.010177510.1063/5.0101775 ↗
11. Li XW, Zhou LL, Huang YF, et al. Progress in the preparation of sodium potassium niobate piezoelectric ceramics. Materials Reports 2023; 37: 43–51.
12. 10.1016/j.jallcom.2021.16020210.1016/j.jallcom.2021.160202 ↗
13. Song YY, Huang YF, Guo WL, et al. Research progress on doping modification of lead-free piezoelectric ceramics based on sodium potassium niobate. Materials Reports 2022; 36: 34–43.
14. 10.1016/j.apenergy.2020.11519310.1016/j.apenergy.2020.115193 ↗
15. 10.3390/s14081373010.3390/s140813730 ↗
16. Yang S, Wang MW, Wu J, et al. Recent progress on textured lead-titanite based piezoelectric ceramics. Journal of the Chinese Ceramic Society 2022; 50: 598–607.
17. 10.1038/nature0302810.1038/nature03028 ↗
18. 10.1021/acsami.3c0763710.1021/acsami.3c07637 ↗
19. 10.1016/j.jmat.2021.08.00610.1016/j.jmat.2021.08.006 ↗
20. 10.1016/j.jmat.2018.09.00610.1016/j.jmat.2018.09.006 ↗
21. 10.1063/1.327580310.1063/1.3275803 ↗
22. 10.1063/1.492995810.1063/1.4929958 ↗
23. 10.1038/s41467-021-21673-810.1038/s41467-021-21673-8 ↗
24. 10.1016/j.jmst.2023.08.02710.1016/j.jmst.2023.08.027 ↗
25. Jun X. Study on properties of textured lead-free piezoelectric ceramics by aqueous tape-casting process. Jiangxi: Jingdezhen Institute of Ceramics, 2014.
26. 10.1016/j.jallcom.2014.11.07110.1016/j.jallcom.2014.11.071 ↗
27. 10.1016/j.ceramint.2023.12.29110.1016/j.ceramint.2023.12.291 ↗
28. Sun S. Research on fabrication and properties of PIN-PMN-PT textured ceramics by templated grain growth. Jiangsu: Nanjing University of Aeronautics and Astronautics, 2019.
29. 10.1016/j.jeurceramsoc.2022.12.02410.1016/j.jeurceramsoc.2022.12.024 ↗
30. 10.1021/acsami.3c0287510.1021/acsami.3c02875 ↗
31. 10.1039/D2TA00203E10.1039/D2TA00203E ↗
32. 10.1016/j.jeurceramsoc.2022.08.00910.1016/j.jeurceramsoc.2022.08.009 ↗
33. 10.1016/j.mtla.2022.10156810.1016/j.mtla.2022.101568 ↗
34. Zhai JW, Liu BH, Liu X, et al. A review on textured perovskite lead-free piezoelectric ceramics. Journal of the Chinese Ceramic Society 2017; 45: 1220–1230.
35. 10.1016/j.addma.2018.11.02810.1016/j.addma.2018.11.028 ↗
36. 10.2109/jcersj2.2017610.2109/jcersj2.20176 ↗
37. 10.1016/j.jallcom.2012.04.09710.1016/j.jallcom.2012.04.097 ↗
38. 10.1111/jace.1962010.1111/jace.19620 ↗
39. Zhao SH, Li JG, Wang N, et al. Research advances in the preparations of textured BaTiO3 piezoelectric ceramics. Journal of Functional Materials And Devices 2022; 28: 492–498.
40. 10.1111/j.1151-2916.2003.tb03373.x10.1111/j.1151-2916.2003.tb03373.x ↗
41. 10.1016/j.ceramint.2003.12.04710.1016/j.ceramint.2003.12.047 ↗
42. 10.1021/acsami.3c1648810.1021/acsami.3c16488 ↗
43. Kim JS, Lee GS, Kim SH, et al. Effect of crystal structure on the improvement of the piezoelectric properties for [001]-textured PZT-PNN piezoceramics. Ceramics International, 2024; 50: 23232–23243.
44. 10.1016/j.ceramint.2023.11.16010.1016/j.ceramint.2023.11.160 ↗
45. 10.1111/j.1551-2916.2012.05353.x10.1111/j.1551-2916.2012.05353.x ↗
46. 10.1063/1.481727810.1063/1.4817278 ↗
47. 10.1143/JJAP.46.703910.1143/JJAP.46.7039 ↗
48. 10.1016/j.jmst.2024.02.05110.1016/j.jmst.2024.02.051 ↗
49. 10.1016/j.jmst.2023.08.01710.1016/j.jmst.2023.08.017 ↗
50. 10.1111/jace.1779810.1111/jace.17798 ↗
51. 10.1111/ijac.1215010.1111/ijac.12150 ↗
52. 10.1111/jace.1685310.1111/jace.16853 ↗
53. 10.1007/s40145-019-0325-510.1007/s40145-019-0325-5 ↗
54. 10.1016/j.ceramint.2006.10.01710.1016/j.ceramint.2006.10.017 ↗
55. Hong Y, Xie J, Wang ZM, et al. Properties of textured potassium-sodium niobate lead-free piezoelectric ceramic. Journal of Ceramics 2014; 35: 619–624.
56. 10.1557/jmr.2017.20710.1557/jmr.2017.207 ↗
57. 10.1063/1.489684010.1063/1.4896840 ↗
58. 10.1016/j.jeurceramsoc.2016.05.01910.1016/j.jeurceramsoc.2016.05.019 ↗
59. 10.1007/s10832-009-9584-910.1007/s10832-009-9584-9 ↗
60. 10.1063/1.492945910.1063/1.4929459 ↗
61. 10.1016/j.ceramint.2023.08.25610.1016/j.ceramint.2023.08.256 ↗
62. 10.1021/acsami.3c1934010.1021/acsami.3c19340 ↗
63. 10.1016/j.ceramint.2023.10.11210.1016/j.ceramint.2023.10.112 ↗
64. Xie T, Huang R, Tan J, et al. The impact of co-doping Ce, W, and Mn on the microstructure and piezoelectric performance of high-temperature piezoelectric ceramics based on CaBi2Nb2O9. Ceramics International, 2024; 50: 17204–17213.
65. Tang W, Wang C, Wang Y, et al. Enhanced and reliable high-power performance of PMN–PZT-based piezoelectric ceramics. Ceramics International, 2024; 50: 17106–17115.
66. Yin J, Wong VK, Xu Q, et al. Conformable shear mode transducers from lead-free piezoelectric ceramic coatings: an innovative ultrasonic solution for submerged structural health monitoring. Advanced Functional Materials 2024: 2401544.
67. 10.1021/acsami.0c1168010.1021/acsami.0c11680 ↗
68. 10.1016/j.ceramint.2024.01.07110.1016/j.ceramint.2024.01.071 ↗
69. 10.1016/j.nanoen.2022.10758010.1016/j.nanoen.2022.107580 ↗
70. 10.1016/j.jeurceramsoc.2022.02.01810.1016/j.jeurceramsoc.2022.02.018 ↗
71. 10.1002/advs.20210571510.1002/advs.202105715 ↗
72. 10.1109/TUFFC.2020.303912010.1109/TUFFC.2020.3039120 ↗
73. 10.1142/S2010135X2244003910.1142/S2010135X22440039 ↗
74. 10.1039/D2TA00203E10.1039/D2TA00203E ↗
75. 10.1002/smll.20220445410.1002/smll.202204454 ↗
76. 10.1039/D2TC03786F10.1039/D2TC03786F ↗
77. 10.1111/jace.1941610.1111/jace.19416 ↗