journal article·2026-08

Preparation and electrochemical performance study of alkaline earth metal oxide-impregnated Sr0.95Ti0.3Fe0.7O3-δ cathode for solid oxide electrolysis cells

Haoyi Jia, Limin Liu, Xiaoliang Zhou, Yanlinqing Luo, Haoran Liu, Chunsu Liu, Shuo Zhang, Bo Zhang, Yongchao Niu

Publisher page

Abstract

In this work, electrolyte-supported solid oxide electrolysis cells (SOECs) were fabricated. STF-X (X = Sr, Ca, Ba) composite heterostructure cathodes were prepared by impregnating alkaline earth metal oxides onto Sr0.95Ti0.3Fe0.7O3-δ(STF) perovskite, which enriches CO₂ reduction active sites and enhances adsorption capacity, optimizing cathode electrochemical performance in SOEC CO₂ electrolysis. STF was synthesized via a sol-gel method. Compatibility characterization and single cell electrochemical measurements showed that impregnation induces extra surface oxygen vacancies, accelerating reaction kinetics and boosting catalytic activity. At 1.8 V and 850 °C, STF-Sr, STF-Ba and STF-Ca exhibit current densities of 0.876, 1.11 and 1.54 A·cm⁻², respectively, far exceeding pristine STF (0.61 A·cm⁻²). The fabricated single cells display excellent long-term stability at 800℃.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Molten salt chemistry and electrochemical processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. A review on cathode processes and materials for electro-reduction of carbon dioxide in solid oxide electrolysis cells10.1016/j.jpowsour.2021.229713 ↗
2. Self-optimized and stable nanocomposites via one-pot synthesis for high-temperature CO2 electrolysis in solid oxide electrolysis cells10.1016/j.jpowsour.2024.234277 ↗
3. Achieving strong chemical adsorption ability for efficient carbon dioxide electrolysis10.1016/j.apcatb.2020.118968 ↗
4. Perovskite SrFeO3−δ decorated with ni nanoparticles for high temperature carbon dioxide electrolysis10.1016/j.ijhydene.2018.07.148 ↗
5. Electrolysis of carbon dioxide in solid oxide electrolysis cells10.1016/j.jpowsour.2009.02.093 ↗
6. A brief review of high-entropy oxides in solid oxide fuel cell applications10.1016/j.mseb.2026.119260 ↗
7. Performance comparison between Ni–SDC and Ni–YSZ cermet electrodes for carbon dioxide electrolysis on solid oxide electrolysis cell10.1149/06402.0053ecst ↗
8. A symmetrical solid oxide electrolysis cell supported by nanostructured electrodes for highly efficient CO2 electrolysis10.1016/j.jpowsour.2024.234742 ↗
9. Enhanced CO2 electrolysis with the modification of Ni–YSZ cathodes by SDC in microtubular solid oxide electrolysis cells10.1021/acs.energyfuels.2c02788 ↗
10. Pd single site-anchored perovskite cathode for CO2 electrolysis in solid oxide electrolysis cells10.1016/j.nanoen.2020.104598 ↗
11. Co-electrolysis of CO2 and H2O in high-temperature solid oxide electrolysis cells: recent advance in cathodes10.1016/j.jechem.2017.07.003 ↗
12. Optimizing CO2 electrolysis performance on oxygen vacancy modulation for LaxSr2–xTiFeO6 perovskite in a solid oxide electrolysis cell10.1021/acsami.4c17344 ↗
13. Characterization and testing of strontium titanium ferrite-based solid oxide cells for reversible and co-electrolysis operation10.1016/j.jpowsour.2025.237029 ↗
14. In-situ dual-exsolved nanometal anchoring on heterogeneous composite nanofiber using as SOEC cathode for direct and highly efficient CO2 electrolysis10.1016/j.jpowsour.2024.235821 ↗
15. Enhanced carbon dioxide electrolysis in Zr-doped ceria10.1021/acs.energyfuels.4c03350 ↗
16. A coupling for success: controlled growth of co/CoOx nanoshoots on perovskite mesoporous nanofibres as high-performance trifunctional electrocatalysts in alkaline condition10.1016/j.nanoen.2016.12.044 ↗
17. Efficient carbon dioxide electrolysis with metal nanoparticles loaded La0·75Sr0·25Cr0·5Mn0·5O3-δ cathodes10.1016/j.jpowsour.2017.07.070 ↗
18. Kim N, Sa YJ, Yoo TS, Choi SR, Afzal RA, Choi T, et al. Oxygen-deficient triple perovskites as highly active and durable bifunctional electrocatalysts for oxygen electrode reactions. Sci. Adv.;4(6): 9360.10.1126/sciadv.aap9360 ↗
19. A-site management prompts the dynamic reconstructed active phase of perovskite oxide OER catalysts10.1002/aenm.202003755 ↗
20. Optimizing nanoparticle perovskite for bifunctional oxygen electrocatalysis10.1039/C5EE03124A ↗
21. Porous LaCo1–xNixO3−δ nanostructures as an efficient electrocatalyst for water oxidation and for a zinc–air battery10.1021/acsami.5b11840 ↗
22. A tailored double perovskite nanofiber catalyst enables ultrafast oxygen evolution10.1038/ncomms14586 ↗
23. Recent development and modification of perovskite-based CO2 electrolysis solid oxide electrolysis cell cathode
24. Perovskite LSCM impregnated with vanadium pentoxide for high temperature carbon dioxide electrolysis10.1016/j.electacta.2016.06.137 ↗
25. Fuel cells: anode-engineered protonic ceramic fuel Cell with excellent performance and fuel compatibility10.1002/adma.201670283 ↗
26. Enhanced CO2 electrolysis through mn substitution coupled with ni exsolution in lanthanum calcium titanate electrodes10.1002/adma.202308481 ↗
27. One-pot impregnation to construct nanoparticles loaded scaffold cathode with enhanced oxygen reduction performance for LT-SOFCs10.1016/j.jallcom.2023.168981 ↗
28. Constructing perovskite/alkaline-earth metal composite heterostructure by infiltration to revitalize CO2 electrolysis10.1016/j.seppur.2022.121475 ↗
29. Controlling Oxygen Mobility in Ruddlesden–Popper Oxides10.3390/ma10040368 ↗
30. Ca-doped La0.75Sr0.25Cr0.5Mn0.5O3 cathode with enhanced CO2 electrocatalytic performance for high-temperature solid oxide electrolysis cells10.1016/j.ijhydene.2021.07.174 ↗
31. An investigation into the electrical impedance of water electrolysis cells - with a view to saving energy10.1016/S1452-3981(23)13969-1 ↗