Impact of triiodide ion incorporation on the absorption and photovoltaic efficiency of Bismuth-Based hybrid compounds
Source abstract
Abstract
• The electronic and optical properties are obtained using first-principles. • The optical properties and efficiencies are split into different atomic species contributions. • The impact of triiodide ion on the optical properties and photovoltaic efficiency is analyzed. • The exchange of lead by Bi is evaluated. To determine whether the incorporation of triiodide ions into Bi-based hybrid compounds can serve as a substitute for iodoplumbates perovskites without diminishing photovoltaic efficiency, we analyzed the contributions of anions and triiodide ions to the absorption coefficients and conversion efficiencies across several compounds, both with and without triiodide ions. The electronic properties and absorption coefficients were obtained from first principles. To determine and quantify the key contributors to the optical gaps, the absorption coefficients and solar cell efficiencies are split as exact many-species expansions. The results reveal that while the triiodide contribution to the absorption coefficients and efficiencies is substantial, the primary distinction between compounds is attributed to the Bi-Bi interatomic distances. Nevertheless, the introduction of triiodide ions results in an increase in efficiency compared to the precursor compounds that lack triiodide ions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Investigating novel perovskites of lead-free flexible solar cell CH3NH3BiI3 and their photovoltaic performance with efficiency over 26%10.1016/j.mseb.2024.117622 ↗
2. A comprehensive review on preparation and humidity sensing applications of metal-halide perovskites10.1016/j.mseb.2024.117834 ↗
3. Strategies for Improving Efficiency and Stability of Inverted Perovskite Solar Cells
4. Modulating Buried Interface to Achieve an Ultra-High Open Circuit Voltage in Triple Cation Perovskite Solar Cells10.1002/aenm.202402469 ↗
5. Device Architecture Engineering: Progress toward Next Generation Perovskite Solar Cells10.1002/adfm.202103121 ↗
6. Enhancing efficiency and stability of inverted perovskite solar cells through synergistic suppression of multiple defects via poly(ionic liquid)-buried interface modification10.1016/j.jmst.2024.05.069 ↗
7. Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands10.1126/science.adm9474 ↗
8. Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications10.1016/j.nantod.2015.04.009 ↗
9. Current progress and future perspectives for organic/inorganic perovskite solar cells10.1016/j.mattod.2013.12.002 ↗
10. Contributions to Optical Properties and Efficiencies of Methyl–Ammonium Lead, Tin, and Germanium Iodide Perovskites10.1021/acs.jpcc.0c02836 ↗
11. Effect of Substitution of Pb for Mg on the Photovoltaic Properties of Methyl-Ammonium Lead Iodide Perovskites10.1002/adts.202100509 ↗
12. Calcium doped MAPbI3 with better energy state alignment in perovskite solar cells10.1063/1.5020840 ↗
13. Strontium Insertion in Methylammonium Lead Iodide: Long Charge Carrier Lifetime and High Fill-Factor Solar Cells10.1002/adma.201603016 ↗
14. Ba2+ Doped CH3NH3PbI3 to Tune the Energy State and Improve the Performance of Perovskite Solar Cells10.1016/j.electacta.2017.09.091 ↗
15. Computational Screening of Homovalent Lead Substitution in Organic–Inorganic Halide Perovskites10.1021/acs.jpcc.5b11845 ↗
16. Migration and evolution of iodine in perovskite solar cells
17. Dynamic Reversible Oxidation-Reduction of Iodide Ions for Operationally Stable Perovskite Solar Cells under ISOS-L-3 Protocol10.1002/adma.202400852 ↗
18. Inverse Design of High Absorption Thin-Film Photovoltaic Materials10.1002/aenm.201200538 ↗
19. A bismuth-based (III) hybrid perovskite as a highly air-stable, potential absorber with photoconductive response10.1016/j.optmat.2023.114228 ↗
20. Stable organic-inorganic hybrid bismuth-halide: Exploration of crystal-structural, morphological, thermal, spectroscopic and optoelectronic properties10.1016/j.molstruc.2022.133102 ↗
21. Reversible structural transformation of metastable lead-free organic–inorganic hybrid bismuth halide single crystals10.1039/D4TA04715J ↗
22. Reversible dehydration–hydration process in stable bismuth-based hybrid perovskites10.1039/D1TC01730F ↗
23. One- and Two-Dimensional Iodine-Rich Iodobismuthate(III) Complexes: Structure, Optical Properties, and Features of Halogen Bonding in the Solid State10.1021/acs.inorgchem.9b03734 ↗
24. Recent Advances in Wide-Bandgap Organic–Inorganic Halide Perovskite Solar Cells and Tandem Application10.1007/s40820-023-01040-6 ↗
25. Lead-free organic inorganic hybrid halide perovskites: An emerging candidate for bifunctional applications10.1016/j.rser.2023.113649 ↗
26. Synthesis and Characterization of New Hybrid Organic–Inorganic Metal Halides [(CH3)3SO]M2I3 (M = Cu and Ag)10.1021/acs.inorgchem.3c04119 ↗
27. Effect Of the organic cation on the optical properties of lead iodine perovskites10.1016/j.solmat.2019.110022 ↗
28. The effect of the halide anion on the optical properties of lead halide perovskites10.1016/j.solmat.2019.03.023 ↗
29. Triiodide-Induced Band-Edge Reconstruction of a Lead-Free Perovskite-Derivative Hybrid for Strong Light Absorption10.1021/acs.chemmater.8b01200 ↗
30. Tunable optical absorption in lead-free perovskite-like hybrids by iodide management10.1039/C9CC05365D ↗
31. Self-Consistent Equations Including Exchange and Correlation Effects
32. Daniel Sánchez-Portal, The SIESTA method for ab initio order- N materials simulation10.1088/0953-8984/14/11/302 ↗
33. Generalized Gradient Approximation Made Simple
34. Efficient pseudopotentials for plane-wave calculations
35. Efficacious Form for Model Pseudopotentials
36. 4f resonances with norm-conserving pseudopotentials
37. Ab initio multicenter tight-binding model for molecular-dynamics simulations and other applications in covalent systems10.1103/PhysRevB.40.3979 ↗
38. Bassani · 1975
39. A. Luque, A. Martí, Theoretical Limits of Photovoltaic Conversion, in Handbook of Photovoltaic Science and Engineering, Edited by A. Luque and S. Hegedus, John Wiley & Sons Ltd, 2003.10.1002/0470014008 ↗
40. Würfel · 2005
41. Green · 2003
42. http://rredc.nrel.gov/solar/spectra/am1.5/ASTMG173/ASTMG173.html, n.d.