Contact and Support Considerations in the Hydrogen Evolution Reaction Activity of Petaled MoS₂ Electrodes

Petaled MoS2 electrodes grown hydrothermally from Mo foils are found to have an 800 nm, intermediate, MoSxOy layer. Similar petaled MoS2 films without this intermediate layer are grown on Au. X-ray photoelectron and Raman spectroscopies and transmission electron microscopy indicate the resulting petaled multilayer MoS2 films are frayed and exhibit single-layer, 1T-MoS2 behavior at the edges. We compare the electrocatalytic hydrogen evolution reaction activity via linear sweep voltammetry with Tafel analysis as well as the impedance properties of the electrodes. We find that petaled MoS2/Au and petaled MoS2/Mo exhibit comparable overpotential to 10 mA cm(-2) at -279 vs -242 mV, respectively, and similar Tafel slopes of ∼68 mV/decade indicating a similar rate-determining step. The exchange current normalized to the geometric area of petaled MoS2/Au (0.000921 mA cm(-2)) is 3 times smaller than that of petaled MoS2/Mo (0.00290 mA cm(-2)), and is attributed to the lower petal density on the Au support. However, Au supports increase the turnover frequency per active site of petaled MoS2 to 0.48 H2 Mo(-1) s(-1) from 0.25 H2 Mo(-1) s(-1) on Mo supports. Both petaled MoS2 films have nearly ohmic contacts to their supports with uncompensated resistivity Ru of <2.5 Ω·cm(2).