journal article·2004-01

Electron microscopy characterization of a molybdenum diffusion barrier in metallizations for chip carriers

Anqiang He, Douglas G Ivey

Publisher page

Abstract

Abstract Mo layers have been studied as potential diffusion barriers for Au–Sn solder bonds in micro/optoelectronic device packaging. Solder was electroplated as alternating AuSn and Au 5 Sn multi-layers on wafers covered with Ti as an adhesion layer, followed by Mo as the diffusion barrier and Au as a capping layer. Samples were annealed at 340–420 °C for as long as 20 min. Scanning and transmission electron microscopy (SEM and TEM) were utilized to characterize interfacial reactions. Mo was found to be metallurgically stable, relative to the Au–Sn solder and the other metallization components, at temperatures up to at least 420 °C. However, the effectiveness of Mo as a barrier can be compromised by two factors. One of these is related to surface roughness associated with AlN or Al 2 O 3 carriers. Non-uniform metallization coverage can lead to breaks in the Mo barrier, resulting in contact between the carrier and molten solder during bonding applications. In addition, thermal stresses generated during heating and cooling can lead to cracking and spalling of the Mo and adhesion layers, exposing the carrier material to molten solder. Pre-annealing can help to relieve the thermal stresses and prevent spalling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Matijasevic · Thin Solid Films · 1993 · 223 · 27610.1016/0040-6090(93)90533-U ↗
2. Ivey · Microstruct. Sci. · 1998 · 26 · 207
3. Ivey · Micron · 1998 · 29 · 28110.1016/S0968-4328(97)00057-7 ↗
4. Wakita · J. Vac. Sci. Tech. B · 1995 · 13 · 209210.1116/1.588082 ↗
5. Merkel · Mater. Sci. Eng., B · 1994 · 25 · 17510.1016/0921-5107(94)90221-6 ↗
6. Harris · J. Vac. Sci. Tech. · 1975 · 12 · 52410.1116/1.568580 ↗
7. Nowicki · J. Vac. Sci. Tech. · 1978 · 15 · 23510.1116/1.569487 ↗
8. A. Kirkitar, R. Sinclair, in: A. Katz, S.P. Murarka, Y.I. Kissim, J.M.E. Harper (Eds.), Mater. Res. Soc. Symp. Proc. 260 (1992) 227.
9. He · Plat. Surf. Finish. · 2002 · 89 · 48
10. J. Shackeldford, W. Alexander, The CRC Materials Science and Engineering Handbook, CRC Press, Boca Raton, USA, 1992.
11. K.N. Tu, J.W. Mayer, L.C. Feldman, Electronic Thin Film for Electrical Engineers and Materials Scientists, McMillan, New York, USA, 1992.
12. M. Ohring, The Materials Science of Thin Films, Academic Press, San Diego, USA, 1992.10.1016/B978-0-08-051118-4.50012-8 ↗
13. Townsend · J. Appl. Phys. · 1987 · 62 · 443810.1063/1.339082 ↗
14. H.E. Boyer, T.L. Gall, Metals Handbook, Desk Edition, the American Society of Metals, Metals Park, USA, 1985.
15. Kim · Phys. Status Solidi A · 1990 · 122 · 25510.1002/pssa.2211220125 ↗
16. Penebaker · J. Appl. Phys. · 1969 · 40 · 39410.1063/1.1657067 ↗
17. Yost · Metall. Trans. A · 1990 · 21 · 188510.1007/BF02647236 ↗