Low-fired (PbCa) (FeNb) O3 ceramics for multilayer microwave filter applications
Source abstract
Abstract
Abstract The microwave ceramics with compositions of Me-substituted (Pb 0.45 Ca 0.55 ){[(Fe 0.5 Nb 0.5 ) 0.9 Sn 0.1 ] 1− x Me x }O 3 (Me=Ti, Mn; x =0∼0.9) were prepared by solid state reaction method. A small amount of low-melting compound in Bi 2 O 3 –LiF system was added to lower the sintering temperature of the microwave ceramics. Bi 2 O 3 –LiF (5 wt.%) addition can lower the sintering temperature to lower than 950 °C. The phase, microstructure and dielectric properties were investigated with XRD, SEM and impedance analyzer. (Pb 0.45 Ca 0.55 ){(Fe 0.5 Nb 0.5 ) 0.9 Sn 0.1 }O 3 ceramics with dielectric constant values ( e r ) of 89 and quality factor ( Q =1/tan δ ) of 1578 at 500 MHz can be obtained when the sintering temperatures are in the range of 950 °C. Furthermore, Ti or Mn substitution on B site in perovskite structure has significant effect on microstructure and dielectric properties. The greater the value of x , the higher the value of dielectric constant, product of quality factor and frequency ( Q · f ), and the size of crystal grain. Ti substitution can strongly enhance Q value. The experimental results show that samples with Ti substitution sintered at 950 °C, with x =0.1, has e r =92 Q =3702 at 500 MHz. It is promising to be applied to multilayer microwave filters, which require low sintering temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. Kang · 1999 · 399
2. Kucheiko · J. Am. Soc. · 1997 · 10 · 2937
3. Kang · J. Mater. Sci. · 1999 · 10 · 661