Effect of test conditions on the efficiency and hysteresis of Sn-Pb mixed perovskite solar cells
Source abstract
Abstract
With the continuous improvement of the efficiency of perovskite solar cells (PSCs), the possible pollution of lead to the environment has become a significant. The appearance of tin–lead mixed PSCs reduces its toxicity. Still, tin-based perovskite materials are easy to oxidize and decompose in the air, which poses a challenge to evaluate its photoelectric performance in the test process correctly. Our work compared and analyzed the photoelectric performance of tin–lead mixed PSCs from the test environment and setting parameters. We discussed the effects of temperature, humidity, measurement delay time, measurement step, and bias voltage on the efficiency and hysteresis of tin–lead mixed PSCs. We summarized the standard test conditions applicable to tin–lead mixed PSCs. The reference of this test method will help to get accurate test results of tin–lead mixed PSCs and promote its further development.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. 28.2%-efficient, outdoor-stable perovskite/silicon tandem solar cell10.1016/j.joule.2021.11.003 ↗
2. Comparison of effects of ZnO and TiO2 compact layer on performance of perovskite solar cells10.1016/j.jssc.2020.121387 ↗
3. Facilitate hole transport with thin 2D perovskite capping layer to passivate interface defects of 3D perovskite solar cells using PEABr10.1016/j.materresbull.2022.111793 ↗
4. Controlled growth of perovskite layers with volatile alkylammonium chlorides10.1038/s41586-023-05825-y ↗
5. Additive engineering for Sn-based PSCs: Enhancement of open-circuit voltage and fill factor10.1016/j.solener.2020.11.038 ↗
6. Optimization of bulk defects in Sn/Pb mixed perovskite solar cells through synergistic effect of potassium thiocyanate10.1002/solr.202000584 ↗
7. Enhanced performance of germanium halide perovskite solar cells through compositional engineering10.1021/acsaem.8b00007 ↗
8. Progress and challenges of lead free halide perovskite materials for perovskite solar cell applications10.1016/j.molstruc.2023.135663 ↗
9. Construction of compact methylammonium bismuth iodide film promoting lead-free inverted planar heterojunction organohalide solar cells with open-circuit voltage over 0.8 V10.1021/acs.jpclett.6b02578 ↗
10. Extended photo-conversion spectrum in low-toxic bismuth halide perovskite solar cells10.1021/acs.jpclett.6b01452 ↗
11. How reliable are efficiency measurements of perovskite solar cells? The first inter-comparison, between two accredited and eight non-accredited laboratories10.1039/C7TA05609E ↗
12. Perovskite solar cells: Do we know what we do not know?10.1021/jz502726b ↗
13. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
14. Modeling anomalous hysteresis in perovskite solar cells10.1021/acs.jpclett.5b01645 ↗
15. Modulating hysteresis of perovskite solar cells by a poling voltage10.1021/acs.jpcc.6b05775 ↗
16. On the current-voltage hysteresis in perovskite solar cells: Dependence on perovskite composition and methods to remove hysteresis10.1002/adma.201805214 ↗
17. Additive engineering for high-performance room-temperature-processed perovskite absorbers with micron-size grains and microsecond-range carrier lifetimes10.1039/C7EE02272G ↗
18. Tuning the crystal growth of perovskite thin-films by adding the 2-pyridylthiourea additive for highly efficient and stable solar cells prepared in ambient air10.1039/C7TA00894E ↗
19. Simultaneous improvement of photovoltaic performance and stability by in situ formation of 2D perovskite at (FAPbI 3) 0.88 (CsPbBr 3) 0.12 /CuSCN interface10.1002/aenm.201702714 ↗
20. Reducing hysteresis and enhancing performance of perovskite solar cells using low-temperature processed Y-Doped SnO2 nanosheets as electron selective layers10.1002/smll.201601769 ↗
21. Hysteresis and transient behavior in current–voltage measurements of hybrid-perovskite absorber solar cells10.1039/C4EE02465F ↗
22. Highly efficient and stable Sn-rich perovskite solar cells by introducing bromine10.1021/acsami.7b04011 ↗
23. Stable Sn/Pb-based perovskite solar cells with a coherent 2D/3D interface10.1016/j.isci.2018.11.003 ↗
24. Highly efficient and stable GABr‐modified ideal‐bandgap (1.35 eV) Sn/Pb perovskite solar cells achieve 20.63% efficiency with a record small Voc deficit of 0.33 V10.1002/adma.201908107 ↗
25. Impact of H2O on organic–inorganic hybrid perovskite solar cells10.1039/C7EE01674C ↗
26. Ge incorporation to stabilize efficient inorganic CsPbI3 perovskite solar cells10.1002/aenm.202103690 ↗
27. Modification of hydrophobic self‐assembled monolayers with nanoparticles for improved wettability and enhanced carrier lifetimes over large areas in perovskite solar cells10.1002/solr.202300388 ↗
28. Sub-1.4eV bandgap inorganic perovskite solar cells with long-term stability10.1038/s41467-019-13908-6 ↗
29. Unveiling the operation mechanism of layered perovskite solar cells10.1038/s41467-019-08958-9 ↗
30. Dynamic phenomena at perovskite/electron-selective contact interface as interpreted from photovoltage decays10.1016/j.chempr.2016.10.002 ↗
31. Optoelectronic studies of methylammonium lead iodide perovskite solar cells with mesoporous TiO2: Separation of electronic and chemical charge storage, understanding two recombination lifetimes, and the evolution of band offsets during J – V hysteresis10.1021/jacs.5b00761 ↗
32. Surface-tension release in PTAA-based inverted perovskite solar cells10.1016/j.orgel.2021.106378 ↗
33. Caffeine improves the performance and thermal stability of perovskite solar cells10.1016/j.joule.2019.04.005 ↗