Effecting on electrical performance of Methylammonium Lead Chloride Iodide perovskite films composited by reduced graphene oxide for controlling double Schottky barrier
Source abstract
Abstract
Semiconducting perovskite thin films are cheap to fabricate and can be coated on fluorine-doped tin oxide (FTO) substrates by using simple techniques such as the solution deposition method. In this work, we show that the improved electrical performance of perovskite film produces that of single crystals in an ambient atmosphere. Herein, Methylammonium Lead Chloride Iodide (MAIPbCl 2 ) is played as perovskite films, which were composited with different weight percent (wt%) of rGO from 7 to 10. All samples in this work were presented with physicochemical, electrical, and optical properties. However, the challenge of this work is the electron scattering at the grain boundaries as a result of the double schottky barrier. The best decreasing the double schottky barrier yielded a maximum conductivity of 68.72 ± 0.95 S/cm, a low sheet resistance of 5.47 ± 1.64 Ω, a decrease in the lowest oxygen vacancy, and an increase in the grain size from 27.89 nm (of MAIPbCl 2) to 34.96 nm at room temperature for the MAPbCl 3-8 wt% rGO composite, which also revealed that this strategy significantly helped to improve the performance of the film. Furthermore, temperature dependence for MAIPbCl 2 -rGO composites demonstrates this high electrical conductivity from room temperature to 323 K, with highest electrical conductivities of 78.68 ± 0.01 S/cm and the activation energy of 0.18 eV at 313 K for 8 wt% rGO. Therefore, MAIPbCl 2 -rGO composite films demonstrated the enhancement of performance of MAIPbCl 2 films; this is next promising for perovskite films in the future.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. P. Selvarajan, G. Chandra, S. Bhattacharya, S. Sil, A. Vinu and S. Umapathy, Potential of Raman spectroscopy towards understanding structures of carbon-based materials and perovskites, emergent mater. 2 (3) (2019) 417–439, doi: 10.1007/s42247-019-00052-6.10.1007/s42247-019-00052-6 ↗
2. A solution-processed bathocuproine cathode interfacial layer for high-performance bromine–iodine perovskite solar cells10.1039/C5CP03995A ↗
3. Cubic methylammonium lead chloride perovskite as a transparent conductor in solar cell applications: an experimental and theoretical study
4. Harnessing the potential of CsPbBr 3-based perovskite solar cells using efficient charge transport materials and global optimization10.1039/D3RA02485G ↗
5. Improving the performance of perovskite solar cells with carbon nanotubes as a hole transport layer10.1016/j.optmat.2023.113702 ↗
6. M. A. Green, Y. Jiang, A. Mahboubi Soufiani, A. Ho-Baillie, Optical properties of photovoltaic organic-inorganic lead halide perovskites article, J. Phys. Chem. Lett. 6 (23) (2015) 4774–4785, doi: 10.1021/acs.jpclett.5b01865.10.1021/acs.jpclett.5b01865 ↗
7. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
8. F.Mumtaz,G. H.Jaffari, S. IsmatShah, Correlation between positive temperature coefficient of resistance, double Schottky barrier, and anionic substituents in BiFeO3, Physica B: Condensed Matter 664 (2023) 414993. https://doi.org/10.1016/j.physb.2023.414993.10.1016/j.physb.2023.414993 ↗
9. Y. Keun Lee, H. Lee, J. Young Park, Tandem-structured, hot electron based photovoltaic cell with double Schottky barriers, Scientific Reports 4 (2014) 4580, doi: 10.1038/srep04580.10.1038/srep04580 ↗
10. Q. Ji,a Lei Bi, J. Zhang, H. Caoa and X. S. Zhao, The role of oxygen vacancies of ABO3 perovskite oxides in the oxygen reduction reaction, Energy Environ. Sci. 13 (2020) 1408-1428, doi: 10.1039/D0EE00092B.10.1039/D0EE00092B ↗
11. The rise of graphene10.1038/nmat1849 ↗
12. S.u. Haque, A. Nasar, Inamuddin, and M. M. Rahman, Applications of chitosan (CHI)-reduced graphene oxide (rGO)-polyaniline (PAni) conducting composite electrode for energy generation in glucose biofuel cell., Sci Rep 10 (2020) 10428, doi: 10.1038/s41598-020-67253-6.10.1038/s41598-020-67253-6 ↗
13. Reduced graphene oxide (rGO) based wideband optical sensor and the role of temperature. Defect states and quantum efficiency10.1038/s41598-018-21686-2 ↗
14. Efficiency and stability enhancement of perovskite solar cells using reduced graphene oxide derived from earth-abundant natural graphite10.1039/D0RA01423K ↗
15. Flux-mediated crystal growth of metal oxides:synthetic tunability of particle morphologies, sizes, and surface features for photocatalysis research10.1039/C4CE01587H ↗
16. Two steps for improving reduced graphene oxide/activated durian Shell Carbon composite by hydrothermal and 3-D ball milling process for symmetry supercapacitor Device10.3390/en16196962 ↗
17. Effect of grain boundary interfaces on electrochemical and thermoelectric properties of a Bi2Te3/reduced graphene oxide composites10.1016/j.matchemphys.2020.123196 ↗
18. Influence of additives on the in situ crystallization dynamics of methyl ammonium Lead halide perovskites10.1021/acsaem.0c02625 ↗
19. Elucidating the role of chlorine in perovskite Solar cells10.1039/C7TA00973A ↗
20. Analysis of substrate coverage of hybrid halide perovskite thin films deposited on glass10.1590/s1517-707620180002.0442 ↗
21. B. Heidari, A. Majdabadi, L. Naji, M. Sasani Ghamsari, Z. Fakharan, and S. Salman, Synergetic effect of Ag/PVP on nonlinear optical characteristic of rGO transparent thin films, Optical and Quantum Electronics 50(7) (2018) 267, doi: 10.1007/ s11082-018-1503-3.10.1007/s11082-018-1503-3 ↗
22. Liquid water-induced growth of the 1D morphology of CH3NH3PbI3 hybrid perovskites10.1039/C9CE01275C ↗
23. A study of inverted-type perovskite Solar cells with Various composition ratios of (FAPbI3)1–x(MAPbBr 3)x10.3390/nano6100183 ↗
24. The influence of temperature and grain boundary volume on the resistivity of nanocrystalline nickel10.1063/1.4935290 ↗
25. Modifying grain Boundary ionic/electronic transport in Nano-sr- and mg- doped LaGaO3-δ by sintering Variations10.1149/2.0151910jes ↗
26. J. H. Lee, Y. H. Kim, S. Jung Ahn, T. H. Ha, and H. S. Kim, Grain-size effect on the electrical properties of nanocrystalline indium tin oxide thin films, Materials Science and Engineering: B 199 (2015) 37-41, doi: 10.1016/j.mseb. 2015.04.011.10.1016/j.mseb.2015.04.011 ↗
27. Direct growth of self-crystallized graphene and graphite nanoballs with ni vapor-assisted growth: from controllable growth to material characterization10.1038/srep04739 ↗
28. Morphology analysis and optimization: crucial factor determining the performance of perovskite Solar cells10.3390/molecules22040520 ↗
29. P. Selvarajan, G. Chandra, S. Bhattacharya, S. Sil, A. Vinu, and S. Umapathy, Potential of Raman spectroscopy towards understanding structures of carbon-based materials and perovskites, emergent mater. 2 (2019) 417–439, doi: 10.1007/s42247-019-00052-6.10.1007/s42247-019-00052-6 ↗
30. IR spectroscopic degradation study of thin Organometal halide perovskite films10.3390/molecules28031288 ↗
31. The development of program for calculating the band gap energy of semiconductor material based on UV-vis spectrum using delphi 7.0
32. Prospects of nanostructure-based Solar cells for Manufacturing future generations of photovoltaic modules10.1155/2009/154059 ↗
33. Automated method for the determination of the band gap energy of pure and mixed powder samples using diffuse reflectance spectroscopy10.1016/j.heliyon.2019.e01505 ↗
34. Absolute energy level positions in tin and lead-based halide perovskites10.1038/s41467-019-10468-7 ↗
35. Perovskite Solar cells: assessment of the materials, efficiency, and stability10.21926/cr.2204033 ↗
36. Reduced graphene oxide-laminated one-dimensional TiO2–Bronze nanowire composite: an efficient photoanode material for dye-sensitized Solar cells10.1021/acsomega.0c05707 ↗
37. Enhancing performance and stability of perovskite Solar cells through Surface defect passivation with organic bidentate Lewis bases10.1021/acsomega.2c03802 ↗
38. Perovskite thin film synthesised from sputtered Lead sulphide10.1038/s41598-018-19746-8 ↗
39. B.P. Kafle, Application of Reduced Graphene Oxide (rGO) for Stability of Perovskite Solar Cells, In: Sahoo, S., Tiwari, S., Nayak, G. (eds) Surface Engineering of Graphene. Carbon Nanostructures. Springer, Cham., (2019) 203 – 229, doi: 10.1007/978-3-030-30207-8_8.10.1007/978-3-030-30207-8_8 ↗
40. O. Okhay, and A. Tkach, Impact of Graphene or Reduced Graphene Oxide on Performance of Thermoelectric Composites, C7(2) (2021)37,doi: 10.3390 /c7020037.10.3390/c7020037 ↗
41. S. Chaitaworn, O. Mekasuwandumrong, P. Praserthdam, Impact of Oxygen Vacancy on the Photocatalytic Selective Hydrogenation of 3-Nitrostyrene via Calcination of TiO2, Conf. Ser.: Mater. Sci. Eng., 559 (2019) 012015, doi: 10.1088/1757-899x/559/1/012015.10.1088/1757-899X/559/1/012015 ↗
42. Determining the role of oxygen vacancies in the photoelectrocatalytic performance of WO3 for water oxidation10.1039/C9SC06325K ↗
43. J. Yu, H. Li, N. Lin, Yishu Gong, H. Jiang, J. Chen, Y. Wang, and X. Zhang, Oxygen-Deficient Engineering for Perovskite Oxides in the Application of AOPs: Regulation, Detection, and Reduction Mechanism, Catalysts 13(1) (2023) 148, doi: 10.3390 /catal13010148.10.3390/catal13010148 ↗
44. Instability in CH3NH3PbI3 perovskite solar cells due to elemental migration and chemical composition changes10.1038/s41598-017-15841-4 ↗
45. Basics and applications of ELNES calculations get access arrow
46. Using electron energy-loss spectroscopy to measure nanoscale electronic and vibrational dynamics in a TEM10.1063/5.0147356 ↗
47. Determination of grain-Boundary structure and electrostatic Characteristics in a SrTiO3 bicrystal by four-dimensional electron microscopy10.1021/acs.nanolett.1c02960 ↗
48. S. B. Lee, J.-H. Lee, Y.-H. Cho, D.-Y. Kim, W. Sigle, F. Phillipp, and P. A. v. A., Grain-boundary plane orientation dependence of electrical barriers at R5 boundaries in SrTiO3, Acta Materialia 56 (2008) 4993-4997, doi: 10.1016/j.actamat.2008.06.019.10.1016/j.actamat.2008.06.019 ↗
49. Impact of oxygen vacancy on the photocatalytic selective hydrogenation of 3-nitrostyrene via calcination of TiO2
50. Charge Separation, band-bending, and recombination in WO3 photoanodes10.1021/acs.jpclett.9b01935 ↗
51. Optimization of graphene conductive ink using solvent exchange techniques for flexible electronics applications10.1016/j.synthmet.2021.116719 ↗
52. Reentrant magnetism at the borderline between long-range antiferromagnetic order and spin-glass behavior in the B-site disordered perovskite system Ca2−xSrxFeRuO 6
53. Temperature-dependent electrical transport, hall effect, and seebeck properties of bulk chemically reduced graphene oxide with bipolar charge carrier materials
54. Structural and morphological studies, and temperature/frequency dependence of electrical conductivity of Ba0.97La0.02Ti1−xNb4x/5O3 perovskite ceramics10.1039/D1RA01763B ↗
55. Measurement changes in activation energy, Hall effect and Seebeck effect of Lead telluride thin films Prepared by thermal evaporation technique with different annealing temperatures
56. Strain effects on flexible perovskite Solar cells10.1002/advs.202304733 ↗
57. Bandgap reduction in rGO-doped CsTiBr 3 perovskite nanorods by solvothermal method
58. Temperature and gravity dependent I-V Characteristics of organic semiconductor diode
59. Free-standing graphene oxide and Carbon nanotube hybrid papers with enhanced electrical and mechanical performance and their synergy in Polymer laminates10.3390/ijms21228585 ↗
60. A law of physics in the classroom: the case of Ohm’s law10.1007/s11191-008-9142-x ↗