Pressure-induced tuning of structure and electronic properties in lead-free hybrid halide perovskite HC(NH2)2SnI3 for photovoltaic solar cells
Source abstract
Abstract
Pressure effect on structural parameters and band gaps for different phases of lead-free photovoltaic hybrid halide perovskite formamidinium tin iodide was studied using density functional theory accounting for van der Waals interactions. The lowest compressibility of formamidinium tin iodide is along C–H bonds of tetragonal and orthorhombic phases, while cubic phase is more compressible (less stable with respect to compression) than tetragonal (the most stable) and orthorhombic ones. It has been established that Sn-I bonds have partially covalent character and their energies were calculated. Electron density and energies for Sn-I bonds increase with pressure. The band gap for tetragonal phase is smaller than that for orthorhombic and cubic phases. Pressure increase causes the band gap, especially for cubic phase, to decrease significantly to the values optimal for the maximum power conversion efficiency of solar cells. The cubic phase reached the optimal band gap values at pressures less than 1.1 GPa.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Ab initio investigation of hybrid organic-inorganic perovskites based on tin halides10.1103/PhysRevB.77.235214 ↗
3. Metal-halide perovskites for photovoltaic and light-emitting devices10.1038/nnano.2015.90 ↗
4. Halide perovskite materials for solar cells: a theoretical review10.1039/C4TA05033A ↗
5. Perovskites for photovoltaics: a combined review of organic–inorganic halide perovskites and ferroelectric oxide perovskites10.1039/C5TA04235F ↗
6. Luminescence spectroscopy of lead-halide perovskites: materials properties and application as photovoltaic devices10.1039/C7TC00669A ↗
7. Perovskites photovoltaic solar cells: an overview of current status10.1016/j.rser.2018.04.069 ↗
8. Large thermal expansion leads to negative thermo-optic coefficient of halide perovskite CH3NH3PbCl3
9. Entropy-driven stabilization of the cubic phase of MaPbI3 at room temperature10.1039/D0TA10492B ↗
10. Benzylammonium-mediated formamidinium lead iodide perovskite phase stabilization for photovoltaics10.1002/adfm.202101163 ↗
11. Water stable haloplumbate modulation for efficient and stable hybrid perovskite photovoltaics
12. First-principles calculations for fundamental and spectroscopic screening of hybrid perovskite (HC(NH2)2PbI3) formamidinium lead iodide10.1016/j.matchemphys.2022.126149 ↗
13. Mechanically stable with highly absorptive formamidinium lead halide perovskites [(HC(NH2)2PbX3; X = Br, Cl]: Recent advances and perspectives10.1002/qua.26671 ↗
14. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
15. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
16. Effects of organic cations on the defect physics of tin halide perovskites10.1039/C7TA02662E ↗
17. Formamidinium tin-based perovskite with low Eg for photovoltaic applications10.1039/C5TA00190K ↗
18. Exploring the properties of lead-free hybrid double perovskites using a combined computational-experimental approach10.1039/C6TA05817E ↗
19. Lead-free hybrid perovskites for photovoltaics10.3762/bjnano.9.207 ↗
20. Progress towards high-efficiency and stable tin-based perovskite solar cells10.3390/en13195092 ↗
21. Theoretical and experimental investigations on the bulk photovoltaic effect in lead-free perovskites MASnI3 and FASnI310.1039/D0RA02584D ↗
22. Lead-free perovskite materials for solar cells10.1007/s40820-020-00578-z ↗
23. The fascinating properties of tin-alloyed halide perovskites10.1021/acsenergylett.1c00289 ↗
24. The prospect of lead-free perovskite photovoltaics10.1021/acsenergylett.1c00636 ↗
25. Verma, An efficient and stable lead-free organic–inorganic tin iodide perovskite for photovoltaic device: progress and challenges10.1016/j.egyr.2022.03.183 ↗
26. Fundamental physical properties of nontoxic tin-based formamidinium FASnX3 (X = I, Br, Cl) hybrid halide perovskites: future opportunities in photovoltaic applications10.1002/ente.202100709 ↗
27. High-efficiency perovskite solar cells based on the black polymorph of HC(NH2)2PbI310.1002/adma.201401137 ↗
28. Negative thermal quenching in FASnI3 perovskite single crystals and thin films10.1021/acsenergylett.0c01166 ↗
29. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
30. Synthesis, resistivity, and thermal properties of the cubic perovskite NH2CH=NH2SnI3 and related systems10.1006/jssc.1997.7593 ↗
31. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
32. Tabulated values of the Shockley-Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
33. Long-lived hot-carrier light emission and large blue shift in formamidinium tin triiodide perovskites10.1038/s41467-017-02684-w ↗
34. Band gap tuning via lattice contraction and octahedral tilting in perovskite materials for photovoltaics10.1021/jacs.7b04981 ↗
35. Lead-free inverted planar formamidinium tin triiodide perovskite solar cells achieving power conversion efficiencies up to 6.22 %10.1002/adma.201602992 ↗
36. Low-bandgap mixed tin–lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells10.1038/nenergy.2017.18 ↗
37. High pressure: a complementary tool for probing solid-state processes10.1039/C8CE01391H ↗
38. Microscopic origin of pressure-induced phase-transitions in urea: a detailed investigation through first principles calculations10.1039/C8CP04827D ↗
39. Positive and negative linear compressibility and electronic properties of energetic and porous hybrid crystals with nitrate anions10.1039/C6CP06902A ↗
40. Compressibility anisotropy and electronic properties of oxyanionic hydrates10.1021/acs.jpca.7b04776 ↗
41. Semi-empirical and ab initio calculations for crystals under pressure at fixed temperatures: the case of guanidinium perchlorate10.1039/D0RA08588J ↗
42. Organic acids under pressure: elastic properties, negative mechanical phenomena and pressure induced phase transitions in the lactic, maleic, succinic and citric acids10.1039/D0MA00019A ↗
43. Pressure-and temperature induced phase transitions, piezochromism, NLC behaviour and pressure controlled Jahn-Teller switching in a Cu-based framework10.1039/D0SC03229H ↗
44. Pressure effects on structure and optical properties in cesium lead bromide perovskite nanocrystals10.1021/jacs.7b05260 ↗
45. Pressure-tailored band gap engineering and structure evolution of cubic cesium lead iodide perovskite nanocrystals10.1021/acs.jpcc.8b01673 ↗
46. Bandgap engineering in two-dimensional halide perovskite Cs3Sb2I9 nanocrystals under pressure10.1039/C9NR09533K ↗
47. Pressure-induced structural transition and band gap evolution of double perovskite Cs2AgBiBr 6 nanocrystals10.1039/C9NR07030C ↗
48. Pressure-induced phase transformation, reversible amorphization, and anomalous visible light response in organolead bromide perovskite10.1021/jacs.5b06346 ↗
49. Pressure-induced bandgap optimization in lead-based perovskites with prolonged carrier lifetime and ambient retainability10.1002/adfm.201604208 ↗
50. Halide perovskites under pressure: accessing new properties through lattice compression10.1021/acsenergylett.7b00284 ↗
51. Effects of nonhydrostatic stress on structural and optoelectronic properties of methylammonium lead bromide perovskite10.1021/acs.jpclett.7b01367 ↗
52. Pressure-induced polymorphic, optical, and electronic transitions of formamidinium lead iodide perovskite10.1021/acs.jpclett.7b00665 ↗
53. Pressure-induced dramatic changes in organic–inorganic halide perovskites10.1039/C7SC01845B ↗
54. Photovoltaic hybrid perovskites under pressure10.1021/acs.jpclett.7b00520 ↗
55. Ambient condition retention of band-gap tuning in MAPbI3 induced by high pressure quenching10.1039/C8CC08549H ↗
56. Pressure-induced band structure evolution of halide perovskites: a first-principles atomic and electronic structure study10.1021/acs.jpcc.8b11500 ↗
57. Putting the squeeze on lead iodide perovskites: pressure-induced effects to tune their structural and optoelectronic behavior10.1021/acs.chemmater.9b00648 ↗
58. Band gap engineering in MASnBr 3 and CsSnBr3 perovskites: mechanistic insights through the application of pressure10.1021/acs.jpclett.9b03046 ↗
59. Metal halide perovskites under compression10.1039/C9TA04930D ↗
60. Pressure responses of halide perovskites with various compositions, dimensionalities, and morphologies10.1063/1.5133653 ↗
61. Pressure engineering of photovoltaic perovskites10.1016/j.mattod.2019.02.016 ↗
62. Ho-kwang Mao, Simultaneous band-gap narrowing and carrier-lifetime prolongation of organic-inorganic trihalide perovskites10.1073/pnas.1609030113 ↗
63. Pressure-induced phase transitions and templating effect in three-dimensional organic-inorganic hybrid perovskites
64. Perspective: fifty years of density-functional theory in chemical physics10.1063/1.4869598 ↗
65. Predicting crystal structures and properties of matter under extreme conditions via quantum mechanics: the pressure is on10.1039/C4CP04445B ↗
66. Research of cation dependences of structural and elastic properties of metal carbonates series by density functional theory calculations10.1016/j.mtcomm.2021.102509 ↗
67. Evolutionary crystal structure prediction as a tool in materials design
68. CRYSTAL14: A program for the ab initio investigation of crystalline solids10.1002/qua.24658 ↗
69. Characterization of the high-pressure structures and phase transformations in SnO2. A density functional theory study10.1021/jp067443v ↗
70. Prencipe · Laurea Thesis. · 1990 · 87
71. Crystal field effects on the topological properties of the electron density in molecular crystals: the case of urea10.1063/1.467882 ↗
72. Hartree-Fock study of lithium hydride with the use of a polarizable basis set10.1103/PhysRevB.29.3591 ↗
73. Density-functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
74. Semiempirical GGA-type density functional constructed with a long-range dispersion correction10.1002/jcc.20495 ↗
75. Compressibility and Electronic Properties of Metal Cyanides10.1134/S106378342107012X ↗
76. The convergence of a class of double-rank minimization algorithms: 2. The new algorithm
77. A quantum theory of molecular structure and its applications10.1021/cr00005a013 ↗
78. Hydrogen bond strengths revealed by topological analyses of experimentally observed electron densities10.1016/S0009-2614(98)00036-0 ↗
79. Estimation of dissociation energy in donor−acceptor complex AuCl·PPh3 via topological analysis of the experimental electron density distribution function10.1021/jp807258d ↗
80. Anion–anion interactions: their nature, energy and role in crystal formation10.1070/RC2010v079n03ABEH004120 ↗
81. Gatti · 2014
82. A universal equation of state for solids10.1088/0022-3719/19/20/001 ↗
83. Chemical bonds without bonding electron density — does the difference electron-density analysis suffice for a description of the chemical bond?10.1002/anie.198406271 ↗
84. From weak to strong interactions: A comprehensive analysis of the topological and energetic properties of the electron density distribution involving X-H⋯F–Y systems10.1063/1.1501133 ↗
85. Chemical bonding in crystals: new directions10.1524/zkri.220.5.399.65073 ↗
86. What is the covalency of hydrogen bonding?10.1021/cr800346f ↗
87. The nature of the chemical bond in oxyanionic crystals based on QTAIM topological analysis of electron densities10.1039/C9RA01403A ↗