High-frequency pulsed-electroluminescence from light-emitting diodes based on quasi-2D perovskites (rubidium-doped CsPbBr3)
Source abstract
Abstract
We report high-frequency pulsed-electroluminescence generation from light-emitting diodes (LEDs) based on quasi-2D perovskites under AC voltages. The quasi-2D form of CsPbBr 3 was obtained upon the inclusion of a larger-sized organic cation, namely phenylethylammonium (PEA); the defects in the perovskite were passivated through rubidium-incorporation. The conversion of the perovskite to a lower-dimensional form, along with defect-passivation, has led to the enhancement of PL emission and thereby yielded increased electroluminescence (EL) intensity from the LEDs based on the perovskites. While the devices under a DC voltage have emitted EL only under a forward-bias section, the LEDs operated with AC voltages have resulted in pulsed-light and EL-emissions under reverse-biased half-cycles as well. In this work, we have recorded the dynamic response of the pulsed-light generated from LEDs under AC voltages and varied its frequency to correlate the effect of defect-passivation (through rubidium-doping) with the frequency–response of pulsed EL-emission.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Perovskite light-emitting diodes10.1038/s41928-022-00745-7 ↗
2. Direct-indirect character of the bandgap in methylammonium lead iodide perovskite10.1038/nmat4765 ↗
3. High photoluminescence quantum yield in band gap tunable bromide containing mixed halide perovskites10.1021/acs.nanolett.5b04884 ↗
4. Light-matter interaction and lasing in lead halide perovskites10.1021/acs.accounts.9b00382 ↗
5. Tuning the luminescence of layered halide perovskites10.1021/acs.chemrev.8b00477 ↗
6. High charge carrier mobility in solution processed one-dimensional lead halide perovskite single crystals and their application as photodetectors10.1039/D0NR01495H ↗
7. High optical gain of solution-processed mixed-cation CsPbBr 3 thin films towards enhanced amplified spontaneous emission10.1002/adfm.202102210 ↗
8. Retrograde solubility of formamidinium and methylammonium lead halide perovskites enabling rapid single crystal growth10.1039/C5CC06916E ↗
9. Tailoring metal halide perovskites through metal substitution: influence on photovoltaic and material properties10.1039/C6EE03201J ↗
10. Charge-carrier dynamics and mobilities in formamidinium lead mixed-halide perovskites10.1002/adma.201502969 ↗
11. Efficient and stable blue perovskite light-emitting devices based on inorganic Cs4PbBr 6 spaced low-dimensional CsPbBr3 through synergistic control of amino alcohols and polymer additives10.1021/acsami.1c02555 ↗
12. Charge-carrier dynamics in 2D hybrid metal-halide perovskites10.1021/acs.nanolett.6b03114 ↗
13. Exploring the role of halide mixing in lead-free BZA2SnX4 two dimensional hybrid perovskites10.1039/C9TA11923J ↗
14. High efficiency blue and green light-emitting diodes using Ruddlesden-Popper inorganic mixed halide perovskites with butylammonium interlayers10.1021/acs.chemmater.8b02999 ↗
15. The role of bulk and interface recombination in high-efficiency low-dimensional perovskite solar cells10.1002/adma.201901090 ↗
16. Crystal orientation and insulating ligand of quasi-two dimensional perovskite optimized through silver ion doping for realizing efficient light emitting diodes10.1016/j.cej.2022.136496 ↗
17. Stable blue perovskite light-emitting diodes achieved by optimization of crystal dimension through zinc bromide addition10.1016/j.cej.2021.128774 ↗
18. Perovskite nanocrystals-polymer composites with a micro/nano structured superhydrophobic surface for stable and efficient white light-emitting diodes10.1016/j.cej.2022.135303 ↗
19. Optimization of the carrier recombination and transmission properties in perovskite LEDs by doping poly (4-vinylpyridine) and graphene quantum dots made of chitin10.1016/j.cej.2022.136518 ↗
20. Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices10.1038/s41467-021-21522-8 ↗
21. An extended tolerance factor approach for organic-inorganic perovskites10.1039/C5SC00961H ↗
22. Role of the spacer cation in the growth and crystal orientation of two-dimensional perovskites10.1039/D0SE01469A ↗
23. Defects in perovskite-halides and their effects in solar cells10.1038/nenergy.2016.149 ↗
24. Formation of surface defects dominates ion migration in lead-halide perovskites10.1021/acsenergylett.9b00247 ↗
25. Defects and their passivation in hybrid halide perovskites toward solar cell applications10.1002/solr.202000505 ↗
26. Defect passivation in lead-halide perovskite nanocrystals and thin films: toward efficient LEDs and solar cells10.1002/anie.202102360 ↗
27. Highly efficient pure-blue light-emitting diodes based on rubidium and chlorine alloyed metal halide perovskite10.1002/adma.202100783 ↗
28. Spectrally tunable and stable electroluminescence enabled by rubidium doping of CsPbBr 3 nanocrystals10.1002/adom.201901440 ↗
29. Rubidium doping to enhance carrier transport in CsPbBr 3 single crystals for high-performance X-ray detection10.1021/acsami.9b14772 ↗
30. Alternating current electroluminescent devices with inorganic phosphors for deformable displays
31. Get it white: color-tunable AC/DC OLEDs10.1038/lsa.2015.20 ↗
32. Alternating current driven organic light emitting diodes using lithium fluoride insulating layers10.1038/srep07559 ↗
33. Alternating-current driven quantum-dot light-emitting diodes with high brightness10.1039/C8NR10461A ↗
34. All-inorganic perovskite quantum dots/p-Si heterojunction light-emitting diodes under DC and AC driving modes10.1002/adom.201700897 ↗
35. Low power consumption red light-emitting diodes based on inorganic perovskite quantum dots under an alternating current driving mode10.3390/nano8120974 ↗
36. Near ultra-violet to mid-visible band gap tuning of mixed cation RbxCs1-xPbX3 (X = Cl or Br) perovskite nanoparticles10.1039/C7NR09607K ↗
37. Blue perovskite light-emitting diodes based on RbX-doped polycrystalline CsPbBr 3 perovskite films10.1039/C9TC01205B ↗
38. Rb+ cations enable the change of luminescence properties in perovskite (RbxCs1-xPbBr 3) quantum dots10.1039/C7NR07776A ↗