Photo- and Thermosensitive Polymer Membrane with a Tunable Microstructure Doped with Graphene Oxide Nanosheets and Poly(N-isopropylacrylamide) for the Application of Light-Cleaning

Traditional polymer membranes exhibit a constant structure that makes adjustment of the filtration process difficult, such as flux changing and contaminant cleaning. Inspired by the automatically closing behavior of leaf stomata under strong light, we prepared a membrane with thermo- and photosensitivities, whose microstructure, as well as filtration properties, could be controlled by adjusting the light condition. The membrane was fabricated by the immersion phase inversion method with a casting solution of polyvinylidene fluoride-g-poly(N-isopropylacrylamide) (PVDF-g-PNIPAAm) and graphene oxide (GO) nanosheets. Additionally, the membrane could be heated to a high temperature in a short time under illumination, causing shrinkage of its PNIPAAm chains and expansion of its membrane pores. On the basis of the reversible photoinduced structural transformation, the membrane exhibited a high water gating ratio under the switching of light on/off. Moreover, we proposed a novel and simple method to clear the contaminant from the pores of the membrane via light, which we named “light-cleaning”. Light-cleaning had a flux recovery rate of 99.2%, substantially higher than that of back-washing (62%). This work not only extends the controllability and functionality of the polymer membrane but also develops a new membrane cleaning system.