Morphology manipulation of photoactive layer through block copolymer to improve the photovoltaic performances of polymer solar cells
Source abstract
Abstract
Additive treatment is an effective method for manipulating the bulk heterojunction (BHJ) photoactive layer morphology of polymer solar cells (PSCs). In this work, block copolymer, polystyrene-block-poly(acrylic acid) (PS-b-PAA), was elaborately selected (according to Flory–Huggins theory) as an additive for active layer to manipulate the BHJ morphology and to enhance the photovoltaic performance of devices. As results, with a PS-b-PAA concentration of 0.4 mg/ml, the corresponding devices achieve a significant power conversion efficiency (PCE) improvement to 13.08%. By systematically analysis, the improved PCE can be ascribed to more appreciate phase separation induced by incorporation of PS-b-PAA. For the instance of the photovoltaic physical process, more suitable morphology can induce improved charge transport efficiency, suppressed bimolecular recombination and monomolecular recombination or trap-assisted recombination. In comparing, the photovoltaic performance of devices with PS-b-PAA is obviously better than that of devices with insulating polymer polystyrene (PS) and polyacrylic acid (PAA). Hence, this work checks the morphology manipulation effects of block copolymer PS-b-PAA and provides an effective and facile method to improve the morphology and photovoltaic performances of PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Recent advances and prospects of D1:D2: A non-fullerene ternary polymer solar cells10.1039/D0TC04407E ↗
2. Low temperature processed high-performance thick film ternary polymer solar cell with enhanced stability10.1016/j.nanoen.2018.03.006 ↗
3. Two dependent working mechanisms enables efficient ternary polymer solar cells with broad compositional tolerance10.1016/j.solener.2021.05.001 ↗
4. Rational Mutual Interactions in Ternary Systems Enable High-Performance Organic Solar Cells10.1002/adfm.202007088 ↗
5. Manipulating the Intermolecular Interactions through Side Chain Engineering and Unilateral π-Bridge Strategy for Efficient Small Molecular Photovoltaic Acceptor10.1002/adfm.202200166 ↗
6. Efficient D1:D2: A Ternary Polymer Solar Cells with Low Voltage Loss and Unblocked Hole Transport Channel Characterized by Kelvin Probe Force Microscopy10.1021/acsaem.2c02452 ↗
7. Self-doping n-type polymer as cathode interface layer enables efficient organic solar cells10.1016/j.optmat.2022.113288 ↗
8. Simultaneously enhancing the performance and mobility of organic solar classical systems by a novel additive10.1016/j.optmat.2022.113219 ↗
9. Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions
10. Highly Efficient All-Small-Molecule Organic Solar Cells with Appropriate Active Layer Morphology by Side Chain Engineering of Donor Molecules and Thermal Annealing10.1002/adma.201908373 ↗
11. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
12. Fluorinated End Group Enables High-Performance All-Polymer Solar Cells with Near-Infrared Absorption and Enhanced Device Efficiency over 14%10.1002/aenm.202003171 ↗
13. High-Efficiency All-Polymer Solar Cells with Poly-Small-Molecule Acceptors Having π-Extended Units with Broad Near-IR Absorption10.1021/acsenergylett.1c00009 ↗
14. Subtle Side Chain Triggers Unexpected Two-Channel Charge Transport Property Enabling 80% Fill Factors and Efficient Thick-Film Organic Photovoltaics
15. Balancing Intermolecular Interactions between Acceptors and Donor/Acceptor for Efficient Organic Photovoltaics10.1002/adfm.202107026 ↗
16. Using Dual Microresonant Cavity and Plasmonic Effects to Enhance the Photovoltaic Efficiency of Flexible Polymer Solar Cells10.3390/nano10050944 ↗
17. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
18. Semitransparent Organic Solar Cells Enabled by a Sequentially Deposited Bilayer Structure10.1021/acsami.0c00396 ↗
19. Simultaneously Improved Efficiency and Stability in All-Polymer Solar Cells by a P–i–N Architecture10.1021/acsenergylett.9b01459 ↗
20. Sequential Deposition of Organic Films with Eco-Compatible Solvents Improves Performance and Enables Over 12%-Efficiency Nonfullerene Solar Cells10.1002/adma.201808153 ↗
21. Simultaneous enhanced efficiency and thermal stability in organic solar cells from a polymer acceptor additive10.1038/s41467-020-14926-5 ↗
22. Enhanced pi-pi Interactions of Nonfullerene Acceptors by Volatilizable Solid Additives in Efficient Polymer Solar Cells10.1002/adma.201900477 ↗
23. Highly efficient layer-by-layer large-scale manufacturing of polymer solar cells with minimized device-to-device variations by employing benzothiadiazole-based solid additives10.1039/D2TA04776D ↗
24. Single-Junction Organic Photovoltaic Cell with 19% Efficiency10.1002/adma.202102420 ↗
25. Retarding the Crystallization of a Nonfullerene Electron Acceptor for High-Performance Polymer Solar Cells10.1002/adfm.201807662 ↗
26. Realizing 8.6% Efficiency from Non-Halogenated Solvent Processed Additive Free All Polymer Solar Cells with a Quinoxaline Based Polymer10.1002/solr.201800340 ↗
27. 17% efficiency all-small-molecule organic solar cells enabled by nanoscale phase separation with a hierarchical branched structure10.1039/D1EE02124A ↗
28. Rational compatibility in a ternary matrix enables all-small-molecule organic solar cells with over 16% efficiency10.1039/D1EE00496D ↗
29. Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design10.1038/s41467-021-25638-9 ↗
30. The coupling and competition of crystallization and phase separation, correlating thermodynamics and kinetics in OPV morphology and performances10.1038/s41467-020-20515-3 ↗
31. Morphology Control in Organic Solar Cells10.1002/aenm.201703147 ↗
32. The role of the third component in ternary organic solar cells10.1038/s41578-019-0093-4 ↗
33. Thermally Stable All-Polymer Solar Cells with High Tolerance on Blend Ratios10.1002/aenm.201800029 ↗
34. Thermal-annealing effects on energy level alignment at organic heterojunctions and corresponding voltage losses in all-polymer solar cells10.1016/j.nanoen.2020.104677 ↗
35. Wood aerogel-derived sandwich-like layered nanoelectrodes for alkaline overall seawater electrosplitting10.1016/j.apcatb.2021.120215 ↗
36. Boosting electrocatalytic hydrogen generation by a renewable porous wood membrane decorated with Fe-doped NiP alloys10.1016/j.jechem.2020.07.037 ↗
37. Achieving 15.81% and 15.29% efficiency of all-polymer solar cells based on layer-by-layer and bulk heterojunction structures10.1039/D2TA02914F ↗
38. Layered optimization strategy enables over 17.8% efficiency of layer-by-layer organic photovoltaics10.1016/j.cej.2022.136368 ↗
39. Efficient Semitransparent Layer-by-Layer Organic Photovoltaics via Optimizing Wide Bandgap and Narrow Absorption Polymer Layer Thickness10.1002/solr.202200308 ↗
40. Ring-perfluorinated non-volatile additives with a high dielectric constant lead to highly efficient and stable organic solar cells10.1039/C9TC00762H ↗
41. Thick-Film High-Performance Solar Cells with a C60-Containing Polystyrene Additive10.1002/solr.201900033 ↗
42. Revealing Morphology Evolution in Highly Efficient Bulk Heterojunction and Pseudo-Planar Heterojunction Solar Cells by Additives Treatment10.1002/aenm.202003390 ↗
43. High-Efficiency Thickness-Insensitive Organic Solar Cells with an Insulating Polymer10.1021/acsami.0c22452 ↗
44. Insulating Polymers for Enhancing the Efficiency of Nonfullerene Organic Solar Cells10.1002/solr.202000013 ↗
45. Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18%10.1002/adma.202007231 ↗
46. A Large-Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance10.1002/adma.201502110 ↗
47. Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells10.1021/jacs.7b02677 ↗
48. A Well-Mixed Phase Formed by Two Compatible Non-Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%10.1002/adma.202101733 ↗
49. A High-Efficiency Organic Solar Cell Enabled by the Strong Intramolecular Electron Push-Pull Effect of the Nonfullerene Acceptor10.1002/adma.201707170 ↗
50. Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells10.1039/c4ee00022f ↗
51. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
52. Miscibility Tuning for Optimizing Phase Separation and Vertical Distribution toward Highly Efficient Organic Solar Cells10.1002/advs.201900565 ↗
53. Device Physics of Polymer: Fullerene Bulk Heterojunction Solar Cells10.1002/adma.200601093 ↗
54. Morphology optimization via molecular weight tuning of donor polymer enables all-polymer solar cells with simultaneously improved performance and stability10.1016/j.nanoen.2019.103931 ↗
55. Vertical Stratification Engineering for Organic Bulk-Heterojunction Devices10.1021/acsnano.8b00439 ↗
56. 14.4% efficiency all-polymer solar cell with broad absorption and low energy loss enabled by a novel polymer acceptor10.1016/j.nanoen.2020.104718 ↗
57. Nematic liquid crystal materials as a morphology regulator for ternary small molecule solar cells with power conversion efficiency exceeding 10%10.1039/C7TA00211D ↗
58. Wide Bandgap Polymer with Narrow Photon Harvesting in Visible Light Range Enables Efficient Semitransparent Organic Photovoltaics10.1002/adfm.202107934 ↗
59. Semitransparent organic solar cells exhibiting 13.02% efficiency and 20.2% average visible transmittance10.1039/D1TA01135A ↗
60. Hidden Structure Ordering Along Backbone of Fused-Ring Electron Acceptors Enhanced by Ternary Bulk Heterojunction10.1002/adma.201802888 ↗
61. Understanding Morphology Compatibility for High-Performance Ternary Organic Solar Cells10.1021/acs.chemmater.6b02264 ↗
62. The influence of molecular orientation on organic bulk heterojunction solar cells10.1038/nphoton.2014.55 ↗
63. Asymmetric-Indenothiophene-Based Copolymers for Bulk Heterojunction Solar Cells with 9.14% Efficiency10.1002/adma.201505957 ↗
64. Recent Developments of Polymer Solar Cells with Photovoltaic Performance over 17%