Enhanced electrical properties of Ba6K2(Ca4Nb4)O21 complex perovskite oxide through modified sintering techniques
Source abstract
Abstract
Abstract In this study the oxygen deficient perovskite Ba0.75K0.25(Ca0.5Nb0.5)O2.75(BKCN 25) is synthesized by solid state method via ball milling. Improvement in total conductivity through reducing grain boundary blocking effect is attempted by performing densification using conventional, microwave and spark plasma sintering. Physical characterizations of the pellets reveal structural stability and variation in morphology and porosity among the pellets sintered using different techniques. XRD analysis confirm cubic double perovskite structure in all sintered pellets but each having different grain sizes. SEM images show densified pellets with well-defined grains separated with grain boundary. AC impedance studies reveal that oxide ionic conductivity of BKCN 25 is ∼1.08 × 10−3 S.cm−1 at 700 °C in air atmosphere similar to reported GDC15, BaCe0.5Zr0.3Y0.2O3-δand BaCe0.45Zr0.45Sc0.1O3-δSOFC electrolytes. Significant enhancement in the total conductivity can be observed for spark plasma sintered BKCN 25 sample with lowest grain boundary blocking contribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Structural transitions and proton conduction in nonstoichiometric A3B′B″O9 perovskite-type oxides10.1111/j.1151-2916.1995.tb09079.x ↗
2. Fast high-temperature proton transport in mixed perovskite10.1016/0167-2738(94)90399-9 ↗
3. Nanoionics: ion transport and electrochemical storage in confined systems10.1038/nmat1513 ↗
4. Some factors that determine proton conductivity in nonstoichiometric complex perovskites10.1016/S0167-2738(99)00189-7 ↗
5. Structural study of the perovskite system Ba6−yCayNb2O11 hydrated to proton conducting Ba6−yCayNb2O10(OH)210.1016/j.ssi.2008.05.008 ↗
6. Characterisation of lower temperature sintered zinc-doped barium calcium niobate proton conducting electrolytes10.1039/c0jm01230k ↗
7. Doping effects on complex perovskite Ba3Ca1.18Nb1.82O9−δ intermediate temperature proton conductor10.1016/j.jpowsour.2011.05.009 ↗
8. Synthesis and characterization of carbon dioxide and boiling water stable proton conducting double perovskite-type metal oxides10.1016/j.jpowsour.2008.09.110 ↗
9. Effect of Ti substitution for Nb in double perovskite-type Ba3CaNb2O9 on chemical stability and electrical conductivity10.1016/j.electacta.2010.08.094 ↗
10. Investigations on the thermo-chemical stability and electrical conductivity of K-doped Ba3-xKxCaNb2O9-δ (x = 0.5, 0.75, 1, 1.25)10.1016/j.ssi.2010.05.054 ↗
11. Materials for proton conducting solid oxide fuel cells (H-SOFCs)10.1149/1.3570024 ↗
12. Structural and conductivity properties of K doped Ba4Ca2Nb2O11(BCN) complex perovskite for energy applications10.1016/j.jallcom.2016.06.198 ↗
13. Comparative evaluation of SPS, MW and TTS on the density and microstructure evaluation of stabilized ZrO2 ceramics10.2298/SOS1003259R ↗
14. Microwave, spark plasma and conventional sintering to obtain controlled thermal expansion beta-eucryptite materials
15. Spark plasma sintering of Mg-based amorphous ball-milled powders
16. Properties of alumina ceramics obtained by conventional and non-conventional methods for sintering ceramics
17. A comparative study of structural and electrical properties of Ba0.8Pb0.2TiO3 nanocrystalline ceramics prepared by microwave and spark plasma sintering”10.1016/j.matchemphys.2013.08.023 ↗
18. Microwave sintering of Ni–Zn ferrites: comparison with conventional sintering10.1016/S0921-5107(03)00063-1 ↗
19. Microwave sintering of W–Ni–Fe alloy10.1016/j.scriptamat.2006.09.010 ↗
20. Aimin Chang, Bo Zhang, Yiquan Wu, et al. Chapter 2, Dr. Arunachalam Lakshmanan (Ed), Sintering techniques of materials, China, Xinjiang Technical Institute of Physics and Chemistry, 2015.
21. Spark plasma and microwave sintering of Al6061 and Al2124 alloys10.1007/s12613-013-0707-6 ↗
22. Spark plasma sintering as a useful technique to the nanostructuration of piezo-ferroelectric materials10.1002/adem.200900052 ↗
23. Electrical relaxation studies of solution combustion synthesized nanocrystalline Li2NiZrO4 material10.1016/j.mseb.2012.04.005 ↗
24. Dispersion and absorption in dielectrics I. Alternating current characteristics10.1063/1.1750906 ↗
25. Complex impedance spectroscopy of Mn-doped zinc oxide nano rod films10.1016/j.ssc.2011.04.028 ↗
26. Citrate- complexation synthesized Ce0.85Gd0.15O2-δ (GDC15) as solid electrolyte for intermediate temperature SOFC10.1016/j.physb.2014.04.056 ↗
27. Y and In doped BaCeO3-BaZrO3 solid solutions: chemically stable and easily sintered proton conducting oxides10.1016/j.jallcom.2016.07.154 ↗
28. Synthesis, chemical stability and proton conductivity of the perovskites Ba(Ce,Zr)1−xScxO3−δ10.1016/j.ssi.2007.02.004 ↗
29. Structural and electrical study of samarium doped cerium oxide thin films prepared by e-beam evaporation10.1016/j.ssi.2014.09.036 ↗
30. Grain-boundary effect in ceria doped with trivalent cations: I, Electrical measurements10.1111/j.1151-2916.1986.tb07464.x ↗