Modulation of optoelectronic properties in Cl and Br doped GUASnI 3 based perovskite solar cells: A Density Functional Theory analysis
Source abstract
Abstract
Partial substitution of I by Cl or Br improves the performance of hybrid lead halide perovskite materials. Here, a systematic density functional theory (DFT)-based investigation has been carried out in some mixed halide perovskites having the general formula GUASnX 3 − y X y ′ , where GUA = guanidinium cation, X = iodine (I), X ′ = chlorine (Cl) or bromine (Br), and y = 0, 1, 1.5, and 2. Results obtained have been compared with the pure iodine-based compound to understand the impact of doping ratio on physical, optoelectronic, and photovoltaic properties of the hybrid halide perovskite materials. From the analysis, it has been observed that all the designed compounds form thermodynamically stable three-dimensional perovskite structures. In addition, the designed compounds possess band gap (E g ) values within the range of 0.91-2.33 eV. However, E g decreases with an increase in iodine content. Complex dielectric function and absorption coefficient analysis led to the conclusion that all the investigated compounds exhibit absorption maxima in the visible range of the electromagnetic spectrum. Moreover, photovoltaic performance analysis reveals that GUASnI 3 exhibits the highest theoretical power conversion efficiency (PCE) of 27.78% among the studied compounds. The study also shows that the pure iodine-based compound is superior to the corresponding mixed halide compounds in terms of their optoelectronic and photovoltaic properties. Hence, it is expected that the study will provide researchers a basis to further investigate mixed halide perovskite based materials in the future.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Methylammonium tin iodide perovskite: structural, electronic and thermodynamic properties by a DFT study with different exchange-correlation functionals10.1007/s42452-020-2549-y ↗
2. Reviewing and understanding the stability mechanism of halide perovskite solar cells10.1002/inf2.12104 ↗
3. Recent progress of inorganic perovskite solar cells10.1039/C9EE01479A ↗
4. Inorganic perovskite solar cells: an emerging member of the photovoltaic community10.1039/C9TA06674H ↗
5. The effect of the magnitude and direction of the dipoles of organic cations on the electronic structure of hybrid halide perovskites10.1039/C9CP02866H ↗
6. Towards enabling stable lead halide perovskite solar cells; interplay between structural, environmental, and thermal stability10.1039/C7TA00434F ↗
7. Light induced degradation in mixed-halide perovskites10.1039/C9TC02635E ↗
8. Photovoltaic performance of lead-less hybrid perovskites from theoretical study10.1021/acs.jpcc.9b02705 ↗
9. Predicted photovoltaic performance of lead-based hybrid perovskites under the influence of a mixed-cation approach: theoretical insights10.1039/C8TC04065F ↗
10. Theoretical progress on the relationship between the structures and properties of perovskite solar cells10.1002/adts.202000022 ↗
11. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
12. Guanidinium tin halide perovskites: structural, electronic, and thermodynamic properties by quantum chemical study10.1007/s00339-021-04504-x ↗
13. Lead-free mixed tin and germanium perovskites for photovoltaic application10.1021/jacs.7b04219 ↗
14. MAPbI3−xClx mixed halide perovskite for hybrid solar cells: the role of chloride as dopant on the transport and structural properties10.1021/cm402919x ↗
15. Halide segregation in mixed-halide perovskites: influence of A-site cations10.1021/acsenergylett.0c02475 ↗
16. Large guanidinium cation mixed with methylammonium in lead iodide perovskites for 19% efficient solar cells10.1038/s41560-017-0054-3 ↗
17. Surface treatment of perovskite layer with guanidinium iodide leads to enhanced moisture stability and improved efficiency of perovskite solar cells10.1002/admi.202000105 ↗
18. Efficient large guanidinium mixed perovskite solar cells with enhanced photovoltage and low energy losses10.1039/C9CC00016J ↗
19. Organic–inorganic hybrid lead iodide perovskite featuring zero dipole moment guanidinium cations: a theoretical analysis10.1021/acs.jpcc.5b00051 ↗
20. Zero-dipole molecular organic cations in mixed organic–inorganic halide perovskites: possible chemical solution for the reported anomalous hysteresis in the current-voltage curve measurements10.1088/0957-4484/26/44/442001 ↗
21. Guanidinium: a route to enhanced carrier lifetime and open-circuit voltage in hybrid perovskite solar cells10.1021/acs.nanolett.5b04060 ↗
22. Advanced capabilities for materials modelling with Quantum ESPRESSO10.1088/1361-648X/aa8f79 ↗
23. Restoring the density-gradient expansion for exchange in solids and surfaces10.1103/PhysRevLett.100.136406 ↗
24. Crystallography Open Database-an open-access collection of crystal structures10.1107/S0021889809016690 ↗
25. Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
26. Rational design of mixed Sn-Ge based hybrid halide perovskites for optoelectronic applications: a first principles study10.1039/D2RA05256C ↗
27. Thermally evaporated methylammonium tin triiodide thin films for lead-free perovskite solar cell fabrication10.1039/C6RA19476A ↗
28. Effective masses and electronic and optical properties of nontoxic MASnX3 (X=Cl, Br, and I) perovskite structures as solar cell absorber: a theoretical study using HSE0610.1021/jp506498k ↗
29. First-principles insight into the structural and optoelectronic properties of Sn and Pb based hybrid halide perovskites for photovoltaic applications10.1080/00268976.2022.2037772 ↗
30. A hybrid functional study on perovskite-based compounds CsPb1−αZnαI3−βXβ (X=Cl or Br)10.1021/acs.jpclett.2c01239 ↗
31. Lead-free perovskite compounds CsSn1−xGexI3−yBry explored for superior visible-light absorption10.1039/D1CP00024A ↗
32. High-throughput DFT calculations of formation energy, stability and oxygen vacancy formation energy of ABO3 perovskites10.1038/sdata.2017.153 ↗
33. GW band structures and carrier effective masses of CH3NH3PbI3 and hypothetical perovskites of the type APbI3: A=NH4, PH4, AsH4, and SbH410.1021/acs.jpcc.5b07891 ↗
34. Formation of hybrid ABX3 perovskite compounds for solar cell application: first-principles calculations of effective ionic radii and determination of tolerance factors10.1039/C6DT04796C ↗
35. Chemical trends in the thermodynamic stability and band gaps of 980 halide double perovskites: A high-throughput first-principles study10.1021/acsami.0c03622 ↗
36. Singh · 2007
37. Mathematical fundamentals of nanotechnology
38. Density functional theory analysis of structural and electronic properties of orthorhombic perovskite CH3NH3PbI310.1039/C3CP54479F ↗
39. Linear relationship between the dielectric constant and band gap in low-dimensional mixed-halide perovskites10.1021/acs.jpcc.1c01576 ↗
40. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
41. First-principles study on structural, mechanical and optoelectronic properties of lead-free mixed Ge-Sn hybrid organic-inorganic perovskites10.1016/j.ssc.2020.114024 ↗
42. Electronic structure and optical properties of gallium-doped hybrid organic-inorganic lead perovskites from first-principles calculations and spectroscopic limited maximum efficiencies10.1021/acs.jpcc.9b03835 ↗