Impact of PTQ11 polymer doping on the optoelectronic and structural properties of a CH3NH3PbI3 perovskite photovoltaic cell
Source abstract
Abstract
At present, one of the most swiftly progressing domains in solar photovoltaics is perovskite-based solar cells. Chemical modification of perovskites with foreign atoms represents a potentially fruitful approach to customizing material characteristics with the aim of enhancing the functionality and durability of solar cells. In this study, we first documented the inverted structure of PTQ11 polymer-doped perovskite solar cells composed of CH 3NH 3PbI 3 (MAPbI 3) perovskite thin film. The findings indicate that the active layer morphology is enhanced through PTQ11 doping, leading to rapid suppression of photoluminescence and delayed carrier recombination. The XRD and Raman spectral analyses revealed the crystalline, single phase, tetragonal, and highly pure MAPbI 3 thin film with the preferred (2 2 0) orientation. Energy gaps ranging from 1.596 eV to 1.577 eV and absorption coefficients exceeding 10 5 cm −1 were characteristics of the doped thin film, which varied with the doping concentration. A transition occurred on the perovskite film’s surface to form smooth, compressed pores measuring 1.63 µm in diameter. This modification potentially enhanced the photovoltaic performance by facilitating charge transport. With an open circuit voltage of 1.11 V, a power conversion efficiency (PCE) of 18.24 %, a short-circuit current density of 22.32 mA/cm 2, and a fill factor of 73.65 %, the PTQ11-9 mg/mL sample constituted the solar cell device base. Hence, the findings suggest that the doping of PTQ11 polymer represents a potentially effective approach to improve the performance of perovskite solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Recent trends in efficiency-stability improvement in perovskite solar cells
2. Emerging perovskite solar cell technology: remedial actions for the foremost challenges
3. The electrical and optical properties of organometal halide perovskites relevant to optoelectronic performance
4. Strain engineering toward high-performance formamidinium-based perovskite solar cells
5. Towards 26% efficiency in inverted perovskite solar cells via interfacial flipped band bending and suppressed deep-level traps10.1039/D3EE03435F ↗
6. Isosymmetric compression of cubic halide perovskites ABX3 (A= K, Rb, Cs; B= Ge, Sn, Pb and X= Cl, Br, I)-influence of cation–anion exchange: a first principle study
7. Enhanced performance of CH3NH3PbI3 perovskite solar cells by excess halide modification
8. Correlation between structural evolution and device performance of CH3NH3PbI3 solar cells under proton irradiation10.1021/acsaem.1c01958 ↗
9. Hybrid perovskites: effective crystal growth for optoelectronic applications10.1002/aenm.201602596 ↗
10. The nature of the methylamine–MAPbI 3 complex: fundamentals of gas-induced perovskite liquefaction and crystallization10.1039/D0TA02494E ↗
11. Effect of deposition method on the structural and optical properties of CH3NH3PbI3 perovskite thin films10.1016/j.optmat.2020.109836 ↗
12. Electron transport materials: evolution and case study for high-efficiency perovskite
13. Perovskites photovoltaic solar cells: an overview of current status10.1016/j.rser.2018.04.069 ↗
14. Moisture-induced structural degradation in methylammonium lead iodide perovskite thin films10.1021/acsaem.0c00638 ↗
15. Structural and optoelectronic properties of hybrid halide perovskites for solar cells
16. Superoxide/peroxide chemistry extends charge carriers’ lifetime but undermines chemical stability of CH3NH3PbI3 exposed to oxygen: time-domain ab initio analysis10.1021/jacs.8b13392 ↗
17. Solvent engineering as a vehicle for high quality thin films of perovskites and their device fabrication10.1002/smll.202008145 ↗
18. Optical and structural properties of CsPbBr 3 perovskite quantum dots/PFO polymer composite thin films10.1016/j.jcis.2019.12.094 ↗
19. Understanding of perovskite crystal growth and film formation in scalable deposition processes10.1039/C9CS00711C ↗
20. Improving the performance of perovskite solar cells by adding 1, 8-diiodooctane in the CH3NH3PbI3 perovskite layer10.1016/j.solener.2018.10.037 ↗
21. Octamethyl-substituted Pd (II) phthalocyanine with long carrier lifetime as a dopant-free hole selective material for performance enhancement of perovskite solar cells10.1039/C7TA07216C ↗
22. Fluorinated polyimide tunneling layer for efficient and stable perovskite photovoltaics
23. Evolution of iodoplumbate complexes in methylammonium lead iodide perovskite precursor solutions10.1021/acs.chemmater.6b04917 ↗
24. A-DA′ DA non-fullerene acceptors for high-performance organic solar cells10.1007/s11426-020-9799-4 ↗
25. Thermally stable MAPbI3 perovskite solar cells with efficiency of 19.19% and area over 1 cm2 achieved by additive engineering
26. From PbI2 to MAPbI3 through layered intermediates10.1021/acs.jpcc.6b03798 ↗
27. Investigation on the structural, spectral, and optical properties of MAPbI3. H2O and MAPbI3 perovskite crystals for photovoltaic cells
28. Investigating the tetragonal-to-orthorhombic phase transition of methylammonium lead iodide single crystals by detailed photoluminescence analysis10.1002/adom.202000455 ↗
29. Pb [N (CN) 2] 2-A novel and effective additive provides visual verifications elucidating efficiency enhancement of CH3NH3PbI3 perovskite solar cells
30. Crystal structure features of CH 3 NH 3 PbI 3–x Br x hybrid perovskites prepared by ball milling: a route to more stable materials10.1039/C9CE01461F ↗
31. Domain size, temperature, and time dependence of photodegradation in mapbi3 probed by raman spectroscopy10.1021/acsenergylett.2c01640 ↗
32. Modifications in structural morphology of CH3NH3PbI3 perovskite using nitrilotriacetic acid and glycine as habit modifiers10.1016/j.matchemphys.2019.122149 ↗
33. Characterization of a CH3NH3PbI3 perovskite microwire by Raman spectroscopy10.1002/jrs.6286 ↗
34. Structural characterization and room temperature low-frequency Raman scattering from MAPbI3 halide perovskite films rigidized by cesium incorporation10.1021/acsaem.8b01539 ↗
35. Vibrational properties of the organic–inorganic halide perovskite CH3NH3PbI3 from theory and experiment: factor group analysis, first-principles calculations, and low-temperature infrared spectra10.1021/acs.jpcc.5b07432 ↗
36. Thermal control of PbI2 film growth for two-step planar perovskite solar cells10.1021/acs.cgd.9b00788 ↗
37. Band structure engineering in metal halide perovskite nanostructures for optoelectronic applications10.1016/j.nanoms.2019.10.004 ↗
38. Characterization of an abnormal photoluminescence behavior upon crystal-phase transition of perovskite CH 3 NH 3 PbI 310.1039/C5CP02605A ↗
39. Luminescent perovskites: recent advances in theory and experiments10.1039/C9QI00777F ↗
40. Designs from single junctions, heterojunctions to multijunctions for high-performance perovskite solar cells10.1039/D1CS00841B ↗
41. Perovskite solar cells on the way to their radiative efficiency limit–insights into a success story of high open-circuit voltage and low recombination10.1002/aenm.201602358 ↗
42. Electric field and mobility dependent first-order recombination losses in organic solar cells10.1002/aenm.201601379 ↗
43. Interaction of organic cation with water molecule in perovskite MAPbI3: from dynamic orientational disorder to hydrogen bonding10.1021/acs.chemmater.6b02883 ↗
44. Identification and characterization of the intermediate phase in hybrid organic–inorganic MAPbI 3 perovskite10.1039/C5DT04420K ↗
45. Infrared spectroscopic study of vibrational modes in methylammonium lead halide perovskites10.1021/acs.jpclett.5b01309 ↗
46. Crystallisation behaviour of CH3NH3PbI3 films: the benefits of sub-second flash lamp annealing10.1016/j.tsf.2018.03.050 ↗
47. Infrared spectroscopic study of vibrational modes across the orthorhombic–tetragonal phase transition in methylammonium lead halide single crystals
48. Hydrogen bonds in perovskite for efficient and stable photovoltaic
49. Microstructural evolution of hybrid perovskites promoted by chlorine and its impact on the performance of solar cell10.1038/s41598-019-41328-5 ↗
50. Comparative study on MAPbI3 based solar cells using different electron transporting materials10.1002/pssc.201510078 ↗