A new strategy to realize phase structure and morphology of BaTiO3 nanowires controlled in ZnO-B2O3-SiO2 glass
Source abstract
Abstract
Abstract A novel strategy was designed to realise the control of the phase structure and morphology of BaTiO3 nanowires in ZnO-B2O3-SiO2 glass. BaTiO3 nanowire-(ZnO-B2O3-SiO2) glass-ceramics were fabricated and controlled by the sol-gel method and two-step sintering process. The influence of the amount of BaTiO3 nanowires on the glass-ceramics phase composition, morphology, and dielectric and energy storage properties was investigated. X-ray diffraction results show that all samples have a perovskite structure of BaTiO3 and a large amount of amorphous glass phases, which is the background, primarily distributed at 10-40°. With an increase in the amount of BaTiO3 nanowires in glass-ceramics, linear grains appear in the sample first, after which they transfer into rod grains as the linear grains are exhausted. The glass-ceramics dielectric constant and energy storage density first increase and then decrease with increasing amount of BaTiO3. For the sample of BaTiO3 nanowire-(ZnO-B2O3-SiO2) glass-ceramics with 30 wt% BaTiO3 nanowires, the linear grains, and the phase structure of BaTiO3 nanowires can be controlled by sintering the sample at 1200 °C for 30 min and then holding at 900 °C for 2 h. Most importantly, this work realised the control of the phase structure and morphology in glass-ceramics, which provides a significant baseline for exploring high-energy storage materials with optimal composition and structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
2. A new family of sodium niobate-based dielectrics for electrical energy storage applications10.1016/j.jeurceramsoc.2019.03.030 ↗
3. Multilayer lead-free ceramic capacitors with ultrahigh energy density and efficiency10.1002/adma.201802155 ↗
4. Temperature stability and low dielectric loss of lithium-doped CdCu3Ti4O12 ceramics for X9R capacitor applications10.1016/j.ceramint.2019.07.344 ↗
5. A brief introduction to ceramic capacitors10.1109/MEI.2010.5482787 ↗
6. Glass-ceramics of barium strontium titanate for high energy density capacitors10.1007/s10832-007-9127-1 ↗
7. Sintering temperature dependent of energy-storage properties in (Ba, Sr)TiO3 glass-ceramics10.1111/j.1551-2916.2010.04301.x ↗
8. Lead sodium niobate glass-ceramic dielectrics and internal electrode structure for high energy storage density capacitors10.1109/TED.2008.2006541 ↗
9. Improved discharge properties of bulk Na2O-BaO-PbO-Nb2O5-SiO2 glass-ceramic dielectrics through electrode structure design10.1016/j.matlet.2011.03.007 ↗
10. Ultrahigh energy storage density and instantaneous discharge power density in BaO-PbO-Na2O-Nb2O5-SiO2-Al2O3 glass-ceramics10.1039/C8TC04096F ↗
11. Crystallization behaviour and properties of BaO-CaO-B2O3-SiO2 glasses and glass-ceramics for LTCC applications10.1016/j.ceramint.2018.03.003 ↗
12. Structure and properties of La-Ca-Mn-O composites prepared by the glass-ceramic method10.1016/j.mseb.2004.06.014 ↗
13. Effect of rare-earth additions on the structure and dielectric energy storage properties of BaxSr1-xTiO3-based barium boronaluminosilicate glass-ceramics10.1016/j.jallcom.2016.02.022 ↗
14. Effect of sintering atmosphere on the microstructure and dielectric properties of barium strontium titanate glass-ceramics10.1007/s10854-017-7887-1 ↗
15. Large improvement on energy storage and charge-discharge properties of Gd2O3-doped BaO-K2O-Nb2O5-SiO2 glass-ceramic dielectrics10.1016/j.mseb.2017.06.011 ↗
16. Effect of different Al/Si ratios on the structure and energy storage properties of strontium barium niobate-based glass-ceramics10.1007/s11664-015-4264-9 ↗
17. Middle- and high- permittivity dielectric compositions for low-temperature co-fired ceramics10.1016/j.jeurceramsoc.2006.05.104 ↗
18. Sintering behavior and dielectric properties of BaTiO3 ceramics with glass addition for internal capacitor of LTCC10.1016/j.jallcom.2007.04.218 ↗
19. Template-free fabrication of pure single-crystalline BaTiO3 nano-wires by molten salt synthesis technique10.1016/j.ceramint.2013.05.105 ↗
20. Sintering behavior and characteristics study of BaTiO3 with 50 wt% of B2O3-Bi2O3-SiO2-ZnO glass10.1016/j.jeurceramsoc.2016.10.036 ↗
21. Z.H. Zhao, X.L. Li, Y.J. Dai, M.Y. Ye, H.Mi. Ji, Texture development in Ba0.85Ca0.15Ti0.90Zr0.10O3 lead-free ceramics prepared by reactive template grain growth with different Ba and Ca sources, Cera. Int. 42 (2016) 18756-18763. https://doi.org/10.1016/j.ceramint.2016.09.016.10.1016/j.ceramint.2016.09.016 ↗
22. Synthesis and characterization of Zn-B-Si-O nano-composites and their doped BaTiO3 ceramics10.1016/j.materresbull.2010.06.009 ↗
23. Sintering dense nanocrystalline ceramics without final-stage grain growth10.1038/35004548 ↗
24. Influences of Fe2O3 on the structure and properties of Bi2O3-B2O3-SiO2 low-melting glasses10.1016/j.ceramint.2013.12.093 ↗
25. Effects of sintering method and BiFeO3 dopant on the dielectric and ferroelectric properties of BaTiO3-BiYbO3 based solid solution ceramics10.1016/j.ceramint.2018.06.126 ↗
26. The energy storage properties of fine-grained Ba0.8Sr0.2Zr0.1Ti0.9O3 ceramics enhanced by MgO and ZnO-B2O3-SiO2 coatings10.1016/j.materresbull.2018.11.033 ↗
27. Sintering behavior, microstructure and dielectric performance of BaTiO3 with 60–65 wt% addition of B2O3-Bi2O3-SiO2-ZnO glass10.1016/j.jallcom.2017.12.099 ↗
28. Effect of BaTiO3 nanowire distribution on the dielectric and energy storage performance of double-layer PVDF-based composites