Laser assisted wet texturing of flexible polyethylene terephthalate substrate using Nd 3+ :YAG laser for photovoltaics devices
Source abstract
Abstract
Abstract In this research, a successful methodology of laser assisted wet texturing (LAWT) of flexible polyethylene terephthalate (PET) is demonstrated. The texturing is carried out employing third harmonics (355 nm) wavelength of solid-state Nd 3+ :YAG laser. The inactive textured flexible substrate is applicable for enhancement of light trapping efficiency (LTE) of solar cell. Achieving textures on the PET is challenging, due to its sensitivity to heat input. The heat input is studied theoretically to determine the parameters window for the experimentations. Using simulation results, three different fluences 10 (poly-crystalline region), 30 (crystalline region) and 50 (ablation region) J/cm 2 were used for LAWT. The samples were investigated using field-emission scanning electron microscopy (FE-SEM), and the localised effects in structures were analysed using X-ray diffraction (XRD), Raman and UV– Vis absorption spectroscopy. Furthermore, for the device development, the sputter-deposited rear electrode of Tungsten ( W ) over textured PET substrate shows an increase in the UV–Vis absorption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Chalcogenide Semiconductor Thin Films · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Roll-to-roll compatible organic thin film transistor manufacturing technique by printing, lamination, and laser ablation10.1016/j.tsf.2014.10.086 ↗
2. Highly efficient Cu(In, Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
3. Flexible photovoltaic technologies10.1039/c3tc32197e ↗
4. Efficient photon management with nanostructures for photovoltaics10.1039/c3nr01152f ↗
5. Photon management in nanostructured solar cells10.1039/c3tc32067g ↗
6. Efficient light management in vertical nanowire arrays for photovoltaics10.1364/OE.21.00A558 ↗
7. Light management with nanostructures for optoelectronic devices10.1021/jz500306f ↗
8. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps
9. Flexible organic electronic devices: materials, process and applications10.1016/j.mseb.2008.06.009 ↗
10. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
11. Pulsed laser interference patterning of polyimide grating for dye-doped polymer laser10.1117/1.JNP.10.033003 ↗
12. Ultrafast large-area micropattern generation in nonabsorbing polymer thin films by pulsed laser diffraction10.1002/smll.201001939 ↗
13. Light trapping and electrical transport in thin-film solar cells with randomly rough textures10.1063/1.4876223 ↗
14. Evolution of sputtered tungsten coatings at high temperature10.1116/1.4817813 ↗
15. Alternative back contact materials for thin film Cu(In, Ga)Se2
16. Alternative back contact designs for Cu(In, Ga)Se2 solar cells on polyimide foils10.1016/j.tsf.2012.11.091 ↗
17. Alternative back contact designs for Cu (In, Ga) Se 2 solar cells on polyimide foils10.1016/j.tsf.2012.11.091 ↗
18. Prospects of novel front and back contacts for high efficiency cadmium telluride thin film solar cells from numerical analysis10.1016/j.solmat.2010.02.042 ↗
19. Black silicon formation using dry etching for solar cells applications10.1016/j.mseb.2012.03.038 ↗
20. Micro/nano structure size effect on superhydrophobicity and anti reflection of single crystalline Si solar cells
21. Improved optical absorption and photocurrent of GaAs solar cells with hexagonal micro-hole array surface texturing10.1016/j.jcrysgro.2012.08.008 ↗
22. Light management for photovoltaics using high-index nanostructures10.1038/nmat3921 ↗
23. Microstructuring of fused silica by laser-induced backside wet etching using picosecond laser pulses10.1016/j.apsusc.2010.05.055 ↗
24. Surface texturing by pulsed Nd:YAG laser10.1016/j.triboint.2009.06.003 ↗
25. Influence of Nd3+:YAG laser beam profiles on annealing and nano-texturing of amorphous-silicon thin films10.14723/tmrsj.35.601 ↗
26. Influence of laser wavelength and beam pro fi le on Nd3+:YAG laser assisted formation of polycrystalline-Si films10.1016/j.tsf.2009.12.003 ↗
27. Crystallization and ablation in annealing of amorphous-Si thin film on glass and crystalline-Si substrates irradiated by third harmonics of Nd3+ :YAG laser10.1016/j.mssp.2009.05.001 ↗
28. Intensity enhancement in textured optical sheets for solar-cells10.1109/T-ED.1982.20700 ↗
29. Structural and optical properties of nano-structured tungsten-doped ZnO thin films grown by pulsed laser deposition10.1016/j.apsusc.2008.10.122 ↗
30. Parametric investigations on the influence of nano-second Nd3+:YAG laser wavelength and fluence in synthesizing NiTi nano-particles using liquid assisted laser ablation technique10.1016/j.apsusc.2016.01.072 ↗
31. Chemical structure change of a KRF-laser irradiated PET fiber surface10.1002/(SICI)1097-4628(19990321)71:12<2027::AID-APP12>3.0.CO;2-K ↗
32. Investigation into etching mechanism of polyethylene terephthalate (PET) films treated in helium and oxygenated-helium atmospheric plasmas10.1002/app.21162 ↗
33. Light trapping in thin-film solar cells with randomly rough and hybrid textures10.1364/OE.21.00A808 ↗
34. Theoretical and experimental investigations into laser ablation of polyimide and copper films with 355-nm Nd :YVO4 laser10.1016/j.jmatprotec.2006.11.106 ↗
35. Transparent films on polymers for photovoltaic applications10.1016/S0042-207X(02)00261-0 ↗
36. Topography, crystallinity and wettability of photoablated PET surfaces10.1021/la9809877 ↗
37. Small-angle x-ray scattering from amorphous polyethylene terephthalate10.1063/1.1660928 ↗
38. Block self-cross-linkable poly(ethylene terephthalate) copolyester via solid-state polymerization: crystallization, cross-linking, and flame retardance
39. Improving gas barrier of PET by blending with aromatic polyamides10.1016/j.polymer.2005.01.056 ↗
40. Assessment and formation mechanism of laser-induced periodic surface structures on polymer spin-coated films in real and reciprocal space10.1021/la200451c ↗
41. Influence of polymer molecular weight on the chemical modifications induced by UV laser ablation10.1021/jp061451u ↗
42. Thickness dependence of optoelectrical properties of tungsten-doped indium oxide films10.1016/j.apsusc.2009.06.099 ↗
43. Redefining the speed limit of phase change memory revealed by time-resolved steep threshold-switching dynamics of AgInSbTe devices
44. Underwater excimer laser ablation of polymers10.1007/s00339-008-4567-2 ↗
45. Mechanisms of laser drilling of metal plates underwater10.1063/1.1667273 ↗
46. Effect of liquid thickness on laser ablation efficiency10.1063/1.2715746 ↗
47. Formalism for the evaluation of strongly non-linear surface stress fields by X-ray diffraction performed in the scattering vector mode10.1002/pssa.2211460208 ↗